Bosch EX72MNX8V0409‑N Specifications

The EX72N is a tough, compact, explosion-protected camera with performance optics for effective surveillance in hazardous locations such as oil and gas, and chemical facilities. The EX72N incorporates a Day/ Night CCD with a mechanical filter for outstanding daytime color and 12 m (40 ft) active‑IR night vision under low light and no light conditions. The EX72N is certified for ATEX Zone 1 or NEC Class I, Division 1 environments, the most stringent safety standards for explosion-protected performance. In practical terms, the Class I, Division 1 certifications signify that the EX72N is safe for use even in environments where explosive gases are present under normal operating conditions. The EX72N incorporates high-strength design, featuring construction of sand-cast, copper-free aluminum strong enough to withstand an internal explosion. Threaded flame paths extinguish burning explosive gases and allow them to exit the housing harmlessly, without risking ignition in the external environment. By meeting the rigorous requirements for Class I, Division 1 environments, the EX72N assures safe, effective performance at less hazardous Division 2 and Class II locations. Rated NEMA 4X for both indoor and outdoor use, the EX72N carries a T6 temperature code, the lowest and safest rating. When combined with the optional EX72LED infra-red illuminator, the EX72N provides exceptional 24/7 surveillance. The EX72N is easy to install into any 12 VDC or 24 VAC system, and is a safe and effective surveillance solution for hazardous locations. Functions Applications • Petroleum processing facilities • Chemical factories • Agricultural processing plants • Refineries • Munitions storage • Oil and gas plants • Fuel storage sites • Industrial plants • Nuclear facilities • Pharmaceutical plants • Aircraft hangers Performance Optics • Performance CCD with mechanical filter technology • High efficiency LED infrared array • 12 m (40 ft) active-IR night vision • Enables effective surveillance in low-light environments EX72N Explosion‑protected Integrated Day/Night Camera ▶UL/CSA or ATEX certified for explosion-protected performance ▶Integrated Day/Night design for 12 m (40 ft) night vision ▶Performance optics with mechanical filter technology ▶High-strength design can withstand an internal explosion ▶Safe for use where explosive gases are normally present ▶Vari-focal auto-iris lens options www.boschsecurity.com

• Sensor provides higher IR sensitivity, low smear, low streaking and excellent anti-blooming characteristics Compact Ruggedized Construction • Small, unobtrusive and discreet housing • Certified CSA Type 4X design for indoor and outdoor performance • High-strength reinforced aluminum construction strong enough to withstand an internal explosion. • Threaded flame paths extinguish burning explosive gases, allowing them to exit the housing harmlessly, without risking ignition in the external environment Installer-Friendly Features • Varifocal lens 4 to 9 mm or 9 to 22 mm • 12 VDC / 24 VAC operation • Optional pan-tilt brackets • Optional wall and pole adapter plates Certifications and Approvals Region Certification Europe CE ATEX Canada CSA CSA/NRTL LR 113310 Class 2258 / 82 - Process Control Equipment - For Hazard- ous Locations - Certified to US Standard 2258 / 02 - Process Control Equipment - For Hazard- ous Locations Safety UL / CSA / ATEX UL 508, 16th Edition - Industrial Control Equipment UL 698, 11th Edition - Industrial Control Equipment for Use in Hazardous (Classified) Locations UL 1203, 3rd Edition - Explosion-Proof and Dust-Igni- tion-Proof Elec. Eqmt for Use in Hazardous (Classified) Locations CSA C22.2 No.0-M1991 - General Requirements - Canadian Electrical Code Part II CSA C22.2 No.0.4-04 - Bonding of Electrical Equip- ment CSA C22.2 No.25-M1966 - Enclosures for Use in Class II Groups E, F and G Hazardous Locations CSA C22.2 No.30-M1986 - Explosion-proof Enclo- sures for Use in Class I Hazardous Locations CSA C22.2 No.94-M1991 - Special Purpose Enclo- sures CSA C22.2 No.142-M1987 - Process Control Equip- ment Class I, Division 1 and 2, Groups B, C, and D Class II, Division 1 and 2, Groups E, F, G Class III ATEX Ex II 2G certified – Equipment or Protective Sys- tem intended for use in Potentially Explosive Atmos- pheres; Directive 94/9/EC ATEX Ex d IIC T6 certified– Equipment or Protective System intended for use in Potentially Explosive Atmos- pheres; Directive 94/9/EC Operational Temp Code T6 (Max. operation ambient 40 ºC.) Environmental CSA / NEMA TYPE 4X Installation/Configuration Notes Dimensions 103.6 (4.08) 146 (5.75) Ø8 (0.31) 146 (5.75) 17 (0.67) 135 (5.30) 79 min. (3.10) 150 min. (5.91) Flexible Mounting Options • Wall mounting - use a combination of EXMB.072B (EX72 adapter plate), EXMB.028B (pan/tilt bracket) and EXMB. 017B (wall mount adapter). • Pole mounting - use a combination of EXMB.072B (EX72 adapter plate), EXMB.028B (pan/tilt bracket) and EXMB. 015B (pole mount adapter). • Ceiling mounting - use a combination of EXMB.072B (EX72 adapter plate) and EXMB.004B (ceiling bracket). All brackets are available as optional accessories. Technical Specifications EX72MNX Day/Night CCD MX4 extended day/night CCD Resolution 540 TVL color / 540 TVL mono IR Spectral Response Enhanced IR Sensitivity Day Sensitivity 0.02 lux with F1.4 lens Night Sensitivity 0 lux (works in total darkness) S/N Ratio Greater than 48 dB (AGC off)

Night Vision Distance 12 m (40 ft) Lens Varifocal 4 to 9 mm or 9 to 22 mm, auto-iris lens Output Signal 1 Vpp, 75 ohm Electronics Iris 1/60 to 1/100,000 (EIA) LED 18 LED high efficiency array, 850 nm Voltage 12 VDC or 24 VAC Power Consumption 8 W (max.) Cabling holes 3/4-inch NPT Construction Sand-cast, copper-free aluminum Flame Path Threaded joint flame paths Operation Temperature Range -50 ºC to +40 ºC (-58 ºF to 104 ºF) Weight 1.4 kg (3.1 lb) Dimensions 145 x 135 x 144 mm (HxWxD) (5.7 x 5.3 x 5.7 in (HxWxD)) Note To order a CSA/ UL certified product use product codes without the AT suffix. To order an ATEX certified product use product codes with the AT suffix. Ordering Information EX72MNX8V0409‑N Explosion-protected Integrated Day/Night Camera Day/Night,18 LEDs, 850 nm, 1/3 in CCD, 540 TVL color/ 540 TVL mono, VA 4 to 9 mm lens, bracket, NTSC, CSA/UL Certified EX72MNX8V0409- N EX72MNX8V0409‑P Explosion-protected Integrated Day/Night Camera Day/Night,18 LEDs, 850 nm, 1/3 in CCD, 540 TVL color/ 540 TVL mono, VA 4 to 9 mm lens, bracket, PAL, CSA/UL Certified EX72MNX8V0409- P EX72MNX8V0922‑N Explosion-protected Integrated Day/Night Camera Day/Night,18 LEDs, 850 nm, 1/3 in CCD, 540 TVL color/ 540 TVL mono, VA 9 to 22 mm lens, bracket, NTSC, CSA/UL Certi- fied EX72MNX8V0922- N EX72MNX8V0922‑P Explosion-protected Integrated Day/Night Camera Day/Night,18 LEDs, 850 nm, 1/3 in CCD, 540 TVL color/ 540 TVL mono, VA 9 to 22 mm lens, bracket, PAL, CSA/UL Certified EX72MNX8V0922- P EX72MNX8V0409AT-P Explosion- protected Integrated Day/Night Camera Day/Night,18 LEDs, 850 nm, 1/3 in CCD, 540 TVL color/ 540 TVL mono, VA 4 to 9 mm lens, bracket, PAL, ATEX Certified EX72MNX8V0409A T-P Ordering Information Accessories EXMB.028B Cable Managed Wall Bracket Cable-managed arm bracket, black EXMB.028B EXMB.072B Adapter Bracket EXMB72 Adapter Bracket, Black EXMB.072B EXMB.015B Pole Mount Adapter Bracket Pole Mount Adapter, black EXMB.015B EXMB.017B Wall Mount Adapter Bracket Wall Mount Adapter, Black EXMB.017B EXMB.004B Ceiling and Pedestal Bracket Mounting Bracket, HD, Pan/Tilt Adjust - Ceil- ing Mount for EX52, EX62, black EXMB.004B UPA-2430-60 Power Supply 120 VAC, 60 Hz, 24 VAC, 30 VA Out UPA-2430-60 UPA-2420-50 Power Supply 220 VAC, 50 Hz, 24 VAC, 20 VA Out UPA-2420-50 www.boschsecurity.com

Americas: Bosch Security Systems, Inc. 130 Perinton Parkway Fairport, New York, 14450, USA Phone: +1 800 289 0096 Fax: +1 585 223 9180 [email protected] www.boschsecurity.us Europe, Middle East, Africa: Bosch Security Systems B.V. P.O. Box 80002 5600 JB Eindhoven, The Netherlands Phone: + 31 40 2577 284 Fax: +31 40 2577 330 [email protected] www.boschsecurity.com Asia-Pacific: Robert Bosch (SEA) Pte Ltd, Security Systems 11 Bishan Street 21 Singapore 573943 Phone: +65 6258 5511 Fax: +65 6571 2698 [email protected] www.boschsecurity.asia Represented by © Bosch Security Systems 11 | Data subject to change without notice T4824152075 | Cur: en-US, V29, 7 Jun 2011