D-Link DIR-300 Setup Manual
Text of the manual
D-Link Technical Support – Applying WPA-PSK Encryption on the DIR-300.
Page 1 of 3
Applying WPA-PSK Encryption
This document will detail how to setup WPA-PSK Encryption on the DIR-300.
WPA-PSK is now considered to be the standard with encrypting a wireless network, it is far
more secure then WEP and is therefore recommended.
D-Link Technical Support – Applying WPA-PSK Encryption on the DIR-300.
Page 2 of 3
1. First you will need a computer/laptop to be connected to one of the LAN Ethernet ports.
NOTE: If you are going to change your Wireless Encryption, DO NOT perform this over a
Wireless connection, connect your computer/laptop to a LAN Port.
2. Proceed to open an Internet Br
D-Link Technical Support – Applying WPA-PSK Encryption on the DIR-300.
Page 3 of 3
It is recommended to change the Wireless Network Name (SSID) to a name of your liking,
in this example it is called "home_network". Enable Auto Channel Selection can be
enabled however it is not mandatory. The Wireless Channel can be changed, Channel's 1,
6 and 11 are non ov
