Bosch KT400 Operation & User’s Manual

14 | ��� | KT400 system settings en 6.1.4 Touch calibration When feeling the screen distorted during the use, the user may need to calibrate the touch screen. Click the Touch Calibration module to enter into the calibration window. Operation steps: 1. Click "Touch calibration" button, Click on the center of cross cursor accurately with the touch pen by following the prompt.,One calibration ends once the cursor changes; 2. Cross cursor will move to 5 points, include top left corner, below left corner, top right corner, below ri ...

10 | ��� | Safety instructions en �.9 F�� Warning This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) this device may not cause harmful intererence, and (2) this device must accept any interference received, including interference that may cause undesired opera- tion. Note: changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equip- ment has been tested and found to co ...

Safety instructions | ��� | 7 ��� | 7 | 7 en �.1.2 High voltages in hybrid vehicles and electric ve- hicles as well as their high-voltage components If high-voltage components or high-voltage wires are inexpertly handled, there is a risk of fatal injury from high voltages and the possib- le transmission of current through the body. ¶ Deenergization is only to be performed by a qualified electrician, a qualified electri- cian for specific tasks (hybrid) or a power systems engineer. ¶ Work on vehicles with high-vo ...

6 | ��� | Safety instructions en 2.� Obligation of contractor The contractor is obliged to ensure that all measures geared towards the prevention of accidents, industrial diseases, labor-related health risks are taken and mea- sures towards making the workplace fit for people to work in are carried out. Specifications for electrical systems (BG� A�) Electrical engineering in Germany is subject to the ac- cident prevention regulations of the trade association "Electrical Plant and Equipment as under BGV A3 (pre- viously V ...

16 | ��� | �ehicle Diagnostic en 6.4.� System upgrade This function is used to KT400 system upgrade. Operation setps: 1. Click "Download" button to wait download finished, you can monitor download progress; 2. After successfully download, then operate according to interface display. i Before download, please confirm KT400 and internet normally connection. 6.4.4 Local upgrade This function is used to upgrade the whole package. Operation steps: 1. Please download the whole package from website, and save the files to root dir ...

20 | ��� | �ehicle Diagnostic en 7.4.5.4 �learing Data This function is used to clear the comparison between data streams. Operation Steps: ¶ Click the “Clear” button to clear the history values of data comparison; meanwhile, the “Clear” button switches to the “Compare” button. 7.4.5.5 Display Modes of Data Streams The value of a data stream can be displayed in three modes, i.e. numeral, waveform and control. The nume- ral display mode is taken as a default. Operation Steps: 1. After reading the data streams, ...