Boss RC-202 Parameter Manual

Basic Procedure for Effect Editing 1. Press the [P. SHIFT]–[DELAY] button to make it blink. 2. Turn the [VALUE] knob to select the FX type. 3. Press the [VALUE] knob to select the parameter; then turn the [VALUE] knob to adjust the value. 4. Press the [SETUP] (EXIT) button to return to the Play screen. FX Type List The parameters that are shown differ depending on the FX type that is selected. FX type Explanation INPUT FX TRACK FX P. SHIFT LO-FI RING MOD DELAY BEAT FILTER SLICER DELAY LPF LPF A filter that cuts the region above the cutoff frequency. ( ( ( ( ( ( ( ...

If you want to load individual WAV files from your computer into the phrase memory of the RC-202, connect the RC-202 to your computer and copy the files into the “ROLAND”-”WAVE” folder of the BOSS_RC-202 drive. Reference For details on how to load files into the RC-202, refer to “Using USB to Exchange Files with Your Computer (USB Mass Storage)” (Owner’s Manual). How the “WAVE” folder is organized WAVE folder Phrase memories are placed in this folder. 001_1 folder Phrase memories for bank 1, phrase memory 1, and track 1 ar ...

If you want to load individual WAV files from your computer into the phrase memory of the RC-202, connect the RC-202 to your computer and copy the files into the “ROLAND”-”WAVE” folder of the BOSS_RC-202 drive. Reference For details on how to load files into the RC-202, refer to “Using USB to Exchange Files with Your Computer (USB Mass Storage)” (Owner’s Manual). How the “WAVE” folder is organized WAVE folder Phrase memories are placed in this folder. 001_1 folder Phrase memories for bank 1, phrase memory 1, and track 1 ar ...

FX Parameter List Parameters indicated by can be controlled by the [INPUT FX]/[TRACK FX] knobs. FX type Parameter Explanation LPF BPF HPF LPF BPF HPF RAT Rate Adjusts the rate of modulation. DEP Depth Adjusts the depth of modulation. RES Resonance Adjusts the intensity of the effect. CUT Cutoff Adjusts the cutoff frequency of the filter. STP Step Rate Specifies the frequency at which stepped filter modulation occurs. If you don’t want any change, choose “OFF.” PH FL PHASER FLANGER RAT Rate Adjusts the speed of the effect. DEP Depth Adjusts the richness of th ...

You can synchronize the tempo to MIDI clock data received via the MIDI IN connector or the USB port. You can also use a MIDI cable to synchronize two RC-202 units. Reference For more detailed information about MIDI and synchronization, refer to “MIDI settings” (Owner’s Manual). AT (default) The RC-202 will normally operate using its internal tempo, but will synchronize the tempo to MIDI clock if MIDI clock data is being input via the MIDI IN connector or the USB port (AUTO). Choose the “AUTO” ...

Here’s how to assign the function of an external pedal (expression pedal, footswitch) that’s connected to the RC-202. You can also assign a control change message from an external MIDI device (such as the FC-300). 1. Select the bank for which you want to make assignments. 2. Press the [SETUP] (EXIT) button. 3. Press the [RING MOD] (CTL) button. Controller settings (CTL Source) 4. Press the [VALUE] knob to select the controller that you want to assign. Value Explanation CT1 The footswitch (CTL 1) connected to the CTL 1, 2/ ...

1. Select the bank for which you want to make settings. 2. Press the [SETUP] (EXIT) button. 3. Press a button to select the category of settings that you want to make. Button Explanation [P. SHIFT] (RHYTHM) button Make rhythm-related settings. [LO-FI] (LOOP) button Make looper-related settings such as recording and playback method. [RING MOD] (CTL) button Make controller-related settings such as for external pedals. [DELAY] (FX) button Make effect settings. 4. Press the [VALUE] knob to select a parameter, and turn the [VALUE] knob to edit the v ...