Degelman Pro-till 26 Quick Start Manual

DEPTH WINGS TRANSPORT JACK 3 4 2 1 4 1 3 2 FLOAT FLOAT 3 3 4 2 2 1 1 1 1 * Refer to operators manual for complete safety and operation info. • Hydraulic Connections & Hoses • Working points & pins • Hubs & Spindles • Tire Pressure: 58 PSI (400 kPa) • Check for missing, worn or damaged parts. Maintenance (Check Machine Daily) PITCH ADJUSTMENT PITCH ADJUSTMENT 143366 v1.4 QUICK-START GUIDE* for PRO-TILL 20/26/28 * Refer to operators manual for complete safety and operation info. T O B E E L I G I B L E F O R Y O U M U S T R E G I S T E R WARRANTY REMEMBER! You must complete Product Registration to be eligible for Warranty.

iv) i) ii) iii) v) F MAX Transport Speed: 40 km/h (25 MPH) D Test. Check. Adjust. 10-12 MPH 100m E Raise for Headland Turns. 1 C Set Cutting Depth 3 2 (Start with 8 stops per cylinder, test depth & adjust) (IMPORTANT: Add depth stops starting from depth plate end ) 2 2 1” 3 3 Depth Adjustment (2 Inner Wheel Cylinders) Typically Set to 2” 1 Pitch Adjustment (2 Outer Cylinder Adjustment Rods) (Tool Storage Location) Scraper Position Overview (Rubber Rollers) Set Gap distance at 1/4” to 3/8” from roller surface. Storage Position Maintenance Position Engaged Position Remove the 4 bolts to rotate into or out of “Storage position”, then re-install. Loosen the 4 bolts to rotate up into “Maintenance Position” & secure. Loosen the 4 bolts to rotate downward. Set the scraper clearance (1/4” to 3/8”). Properly tighten.