Vaisala HMP5 Manual 

Temperature Probes HMP4, HMP5, HMP7, HMP8, TMP1

Mailing address: P.O. Box 26, FI-00421 Helsinki, Finland Phone: +358 9 8949 1 Visit our Internet pages at www.vaisala.com. No part of this manual may be reproduced, published or publicly displayed in any form or by any means, electronic or mechanical (including photocopying), nor may its contents be modified, translated, adapted, sold or disclosed to a third party without prior written permission of the copyright holder. Translated manuals and translated portions of multilingual documents are based on the original English versions. In ambiguous cases, the English versions are applicable, not the translations. The contents of this manual are subject to change without prior notice. Local rules and regulations may vary and they shall take precedence over the information contained in this manual. Vaisala makes no representations on this manual’s compliance with the local rules and regulations applicable at any given time, and hereby disclaims any and all responsibilities related thereto. This manual does not create any legally binding obligations for Vaisala towards customers or end users. All legally binding obligations and agreements are included exclusively in the applicable supply contract or the General Conditions of Sale and General Conditions of Service of Vaisala. This product contains software developed by Vaisala or third parties. Use of the software is governed by license terms and conditions included in the applicable supply contract or, in the absence of separate license terms and conditions, by the General License Conditions of Vaisala Group.

English............................................................................................................................ 5 日本語........................................................................................................................... 17 3

digital (Modbus) output. TMP1 is a temperature-only version. The probes are designed for demanding humidity and temperature measurement applications. Each probe model has a different probe head, but the same probe body and a 2 m (6.5 ft) cable between the probe body and the probe head. The probes are compatible with Vaisala Indigo™ transmitters. They can also be connected to Vaisala Insight software for configuration, diagnostics, and temporary online monitoring. Probe Structure 2 1 3 4 5 6 7 8 Figure 1 Probe Parts 1 Protection cap (remove before use) 2 5-pin M12 connector 3 Probe body with type label 4 Status indicator: Green Power on and probe online, flashes when communicating Red Error Off Power off or indicator disabled 5 Probe cable. Do not cut. 6 Probe head (HMP7 model shown) 7 Sensor(s) under protective filter 8 Protection cap (remove before use) More Information For detailed instructions for installing, configuring, and maintaining the probes, see HMP4, 5, 7, 8, and TMP1 User Guide in English M212022EN available at www.vaisala.com . 5 ENGLISH