Pyle PLDVRCAM71 Operation & User’s Manual

in case of trafc accident. This camera can also be used in other occasions such as meetings, monitoring and forensics, location shooting and video evidence. This product is a blend of wide dynamic digital industry leading camera, no leakage of seconds, seamless circular camera, ultra wide angle shooting, with display real-time playback, mobile detection camera, parking guard technology in one; streamline design of unique fashion, favored by the vast number of consumers. This manual will detail how to install, operate, product parameter and matters needing attention. Please read carefully and keep for future reference before use. The specifcation parameters may be due to upgrade, update and other reasons do change, refer to the actual product, without prior notice. The manufacturer reserves without prior notice, to change the technology of direct rights. Infringement of copyright or privacy notice Please note that this product is for personal use only, its use shall not violate domestic or international copyright / privacy laws. The image is for personal use only recorded, not foreign free to publish spread; in addition the product record show, exhibition or commercial activities of the image may in some cases infringe copyright or the legal rights and interests.

rear-view mirror. To determine the lens in the windshield wiper is in range, ensure good vision, and also good in rainy environments. Don't touch the lens with your fngers, the fnger’s grease may remain in the lens, resulting in camera or photograph to be unclear, please clean the lens regularly. Attention • Please use the original standard charger • Please do not dismantle the machine to avoid afecting the scope of warranty. • Please fnd a professional to modify the power line. PRODUCT STRUCTURE DESCRIPTION

2. Micro SD Memory Card Slot 3. Knob 4. USB Interface 5. GPS Interface (optional) 6. AV Interface 7. MIC Indicator 8. Power Indicator 9. REC Indicator Description of Button Functions 1. Button Function 1: Power ON/OFF In power-OFF state, press the button to power ON DASHCAM. The DASHCAM begins to work automatically. In power-ON state, press and hold the button for fve seconds. Then, the DASHCAM saves the video-recording fle automatically and powers OFF. FUNCTION 2: TURN ON/OFF SCREEN In power-ON state, press the button to disable the back-light of the screen, and press any button to resume the back-light of the screen (This function only acts upon the back-light of the screen without afecting the video recording function). 2. Button FUNCTION 1: MENU BUTTON In standby state, press the button to enter the function setting table of the main menu. Press the or button to select the desired option, and press the button to confrm the selected option. After completing the setting, press the button to exit the menu setting function. 10. Screen 11. MIC Button 12. REC Button 13. OK Button 14. Menu Button 15. Power Button 16. Pedestal 17. Reset Button 18. Cable Slot

FUNCTION 1: LOCKING During the video-recording process, press the button to save the video-recording data into a separate folder in the memory card. The fles in the folder will not be overwritten cyclically. NOTE: In playback mode, a key-shaped icon in the miniature icon list indicates that the audio recording is locked. FUNCTION 2: PHOTOGRAPH In photograph mode, press the button to take photos. FUNCTION 3: CONFIRMATION During the menu setting process, press the to confrm the settings. FUNCTION 4: PLAY In playback mode, press the button to play video data and press the button again to suspend. FUNCTION 5: ESCAPE In playback mode, press and hold the button for fve seconds to switch the current interface to the recording interface. 4. Button FUNCTION 1: PAGE UP In the menu setting and playback modes, you can press to page up. FUNCTION 2: FAST BACKWARD In playback state, press the button to enter the fast backward mode. FUNCTION 3: VIDEO-RECORDING In standby state, press the button to begin recording, and press the button again to stop.

FUNCTION 1: PAGE DOWN In the menu setting and playback modes, you can press the button to page down. FUNCTION 2: FAST FORWARD In playback state, press the button to enter the fast forward mode. FUNCTION 3: MODE SWITCHING In standby state, press the to enter the photograpy mode, and press the again to enter the playback mode. On the playback interface, you can page up/down and press the to select the desired fle. FUNCTION 4: DISABLE THE AUDIO-RECORDING FUNCTION In recording mode, press the button to disable the audio-recording function. Then, the MIC indicator is turned of. Press the button again to enable the audio -recording function. Then, the MIC indicator is turned on. 6. Button If the DASHCAM is crashed, press the button to power of the DASHCAM. INSTALLATION 1. Fixing the camera to the window mount It is compulsory for window mount to be fxed up before using the device in the car. Make sure that you place the recorder in an appropriate place, so as not to obstruct the driver’s view. 2. Connecting charger to the cigarette lighter Connect only the manufacturer-approved charger supplied with your device. Use only approved charger specifcally designed for your device. Incompatible charger can cause serious injuries or damage to your device.

You have to insert a memory card before you can start recording. The recorder supports Micro SD cards with up to 32GB capacity. You are advised to use a Class 10 memory card with at least 8GB capacity. DO NOT insert or remove the memory card when operating the device. OPERATION GUIDE I. Installing the DASHCAM 1. Power of the automobile engine. 2. Insert the Memory card into the Memory card slot. NOTE: a. The 1080P format is adopted for the video-recording function, and large amount of data will be generated for the video-recording function. To prevent system crash, you are recommended to use well-branded high-speed TF card (Class 10) with a capacity of at least 4 GB. The Memory card supports a maximum capacity of 32 GB. b. The data recorder does not support hot plugging of the Memory card. Be sure to remove the Memory card after powering of the data recorder. 3. Secure the DASHCAM to the front windshield of the automobile. NOTE: Mount the DASHCAM in a safe place with ample light. Preferably, the DASHCAM should be mounted on both sides of the rearview mirror. Before pasting and mounting the DASHCAM, clear the impurities and moisture in the pasting position by using a clean and soft cloth. 4. Fix the power cable properly by using the cable slot and cable clip, preventing the line of sight from being afected. 5. Insert the in-vehicle charger into the cigar lighter of the automobile.

the USB interface the data recorder. 7. Adjust the angle of the data recorder, ensuring that the camera lens keeps level with the ground. 8. Start up the engine and check whether the DASHCAM is mounted properly. II. Function Description 1. Automatic Recording After you start up the automobile engine, the DASHCAM will automatically start and recording function will be enabled. In addition, the system indicator and power indicator are turned on, and the REC indicator on the screen blinks. After you turn of the automobile engine, the DASHCAM saves the recorded content automatically and will be powered of. The recorded images are saved segment by segment in the Memory card. When the Memory card saved images is at full capacity, the data recorder overwrites the early recorded images. NOTE: You can set the time period of recording in the menu. The time period can be set to 1 minute, 3 minutes, and 5 minutes. The default time period is 3 minutes. 2. Manual Recording Press the button, the DASHCAM is powered on and begins to record data automatically. Press and hold the button for 5 seconds, and then the DASHCAM saves the recording data automatically and is powered of. 3. Photography Function In standby state, press the button to enter the photography mode. Then, the icon in the upper left of the screen is changed from a video camera to a still camera.

the video-recording mode, press the button and press and hold the button for fve minutes. 4. Collision Sensing The DASHCAM is ftted with a built-in collision sensor (G-sensor). In case of severe vehicle collision, the DASHCAM locks the image data generated at the time of the accident, and displays a lock icon in the middle of the screen. [Prompt] The collision sensor (G-sensor) supports sensitivity adjustment. By default, sensitivity adjustment is . You can change the sensitivity settings as needed in the setting menu. 5. Date and Time Setting In standby state, press the button twice to enter the system setting menu. Press the button to move the cursor to the option. Press the button to confrm it, and enter the menu. [Prompt] Press the and buttons to select values, press the button to proceed to the next option, and press the button to confrm the option and then exit. [Note] To efectively record the date and time of obtaining the evidence of the trafc accident, set a correct date and time before using the DASHCAM. 6. USB Mode Connect the data recorder to the USB interface of a PC by using a data cable. Then, the screen displays two modes: memory and camera. Press the or button to select the option. Press the button to enter the USB fash disk mode.

it is recommended that you use a card reader to copy the video-recording fle in the TF card to the PC. 7. Playback of Recording File In power-on state, press the button twice to enter the playback mode. Press the or button to fnd the desired type of fle, and press the button to play back the fle. 8. PC Camera Connect the data recorder to the USB interface of a PC by using a data cable. Then, the screen displays two modes: memory and camera. Press the or button to select the option. Press the button to enter the PC camera mode. After a driver is installed in the PC, displays the camera icon. Double-click the camera icon to turn on the camera.