Black Box ICD105A Specifications

three-way isolation, and rugged durability in temperature extremes. DIN rail workhorses with UL approval, three-way isolation, and rugged durability in temperature extremes. Industrial DIN Rail Converter, Repeaters, and Fiber Driver © 2007. All rights reserved. Black Box Corporation. FREE 24-hour Tech Support: 724-746-5500 blackbox.com

FEATURES • All products are UL approved. • All products offer three-way isolation, 2000-V input/output. • All products operate from -40 to +185°F (-40 to +85°C). • The Industrial DIN Rail Converter converts unbalanced half- or full duplex RS-232 signals to balanced full duplex RS-422 or 2-wire half- or 4-wire full duplex RS-485. • Both Industrial DIN Rail Repeaters boost your data signals, feature optical isolation, and include 600 W of surge suppression. • The Industrial DIN Rail Fiber Driver enables any two async serial devices to communicate half- or full duplex over two multimode ST fibers at distances up to 2.5 miles (4 km). Our DIN rail solutions in an industrial setting. OVERVIEW Industrial RS-232↔RS-422/RS-485 DIN Rail Converter • UL® approved. • Three-way isolation, 2000-V input/output. • Operates from -40 to +185°F (-40 to +85°C). • Converts unbalanced half- or full duplex RS-232 signals to balanced full duplex RS-422 or 2-wire half- or 4-wire full duplex RS-485. • Extends communications up to 4000 feet (1219.2 m). • Features addressing up to 32 nodes. Industrial RS-422/RS-485 DIN Rail Repeater • UL approved. • Three-way isolation, 2000-V input/output. • Operates from -40 to +185°F (-40 to +85°C). • Features optical isolation plus 600 W of surge suppression. • Adds 4000 feet (1219.2 m) and another 32 nodes to an RS-485 data circuit. Configure one side as RS-422 and the other side as RS-485 to enable a 4-wire RS-422 device to communicate with a 2-wire RS-485 device. Industrial RS-232 DIN Rail Repeater • UL approved. • Three-way isolation, 2000-V input/output. • Operates from -40 to +185°F (-40 to +85°C). • Features optical isolation plus 600 W of surge suppression. • Isolates the TD, RD, RTS, and CTS channels. • Modbus ASCII or RTU compatible. • Automatic Send Data Control eliminates the need for driver software. Industrial DIN Rail RS-232/RS-422/RS-485↔ Fiber Driver • UL approved. • Three-way isolation, 2000-V input/output. • Operates from -40 to +185°F (-40 to +85°C). • Enables any two async serial devices to communicate half- or full duplex over two multimode ST fibers at distances up to 2.5 miles (4 km). • RS-232 signals are supported up to 115.2 kbps; RS-422 or RS-485 signals are supported up to 460.8 kbps. Industrial RS-232↔ RS-422/RS-485 DIN Rail Converter (ICD105A) Industrial RS-422/RS-485 DIN Rail Repeater (ICD107A) DIN Rail RS-422/RS-485 Data-Line Surge Protector (SPD001A) Industrial DIN Rail RS-232/RS-422/RS-485↔ Fiber Drivers (MED101A) DIN Rail 12-VDC Power Supply (PSD100) DIN Rail 12-VDC Power Supply (PSD100) Time clocks Fiber Cable Conveyor belt Time clock Scale Workstation Low-Capacitance Cable (ERN04A) Low-Capacitance Cable (ERN04A) Low-Capacitance Cable (ERN04A) Low-Capacitance Cable (ERN04A) DB9 Male/Female Cable (BC00200) 1/22/2007 #26548 724-746-5500 blackbox.com

TECH SPECS Distance (Maximum) — ICD105A, ICD107A: 4000 ft. (1219.2 m); ICD108A: 50 ft. (15.2 m); MED101A: 2.5 mi. (4 km) Operation — ICD105A: RS-232: Half- or full duplex; RS-422: Full duplex; RS-485: 2-wire half-duplex or 4-wire full duplex; ICD107A: RS-422: Full duplex; RS-485: 2-wire half-duplex or 4-wire full duplex; ICD108A: RS-232: Half- or full duplex; MED101A: RS-232: Half- or full duplex; RS-422: Full duplex; RS-485: 2-wire half-duplex or 4-wire full duplex; Fiber ring: Half-duplex over multimode; All transmissions are async Speed — ICD105A: 1200 bps to 115.2 kbps; 2400 bps to 38.4 kbps, switch-selectable; ICD107A: 2400 bps to 115.2 kbps, switch-selectable; other rates available up to 460.8 kbps; ICD108A: Up to 115.2 kbps; MED101A: RS-232: Up to 115.2 kbps; RS-422/RS-485: Up to 460.8 kbps CE Approval — Yes Connectors — ICD105A: (1) 5-position terminal block, (1) DB9 F (DCE); ICD107A: (2) 5-position terminal blocks; ICD108A: (1) DB9 M, (1) DB9 F; MED101A: (2) 5-position terminal blocks, (1) pair of ST® Operating Environment — Temperature: -40 to +185°F (-40 to +85°C); Humidity: Up to 95% noncondensing Power — +10 to -48 VDC (±20%) or from optional DIN Rail 12-VDC Power Supply (PSD100) Size — ICD105A: 4.9"H x 4.1"W x 1.3"D (12.4 x 10.4 x 3.3 cm); ICD107A: 3.9"H x 2.9"W x 0.9"D (9.9 x 7.4 x 2.3 cm); ICD108A: 4.9"H x 4.2"W x 1.3"D (12.4 x 10.7 x 3.3 cm); MED101A: 4.9"H x 4.5"W x 1.3"D (12.4 x 11.4 x 3.3 cm) 1/22/2007 #26548 724-746-5500 blackbox.com Item Code Industrial RS-232↔RS-422/RS-485 DIN Rail Converter ICD105A Industrial RS-422/RS-485 DIN Rail Repeater ICD107A Industrial RS-232 DIN Rail Repeater ICD108A Industrial DIN Rail RS-232/RS-422/RS-485↔Fiber Driver MED101A For DB9 male/female connections, order… DB9 Male/Female Cable, 6-ft. (1.8-m) BC00200 For RS-422 and RS-485 interfaces, order… Individually Shielded Low-Capacitance Cable—Extra Distance, PVC Jacket, 4 Conductors (2 Pairs), 2000-ft. (609.6-m) ERN04A-2000 You may also need… DIN Rail, 1-m (3.2-ft.) DR100 DIN Rail DB25 to Terminal Block Adapter IC980 DIN Rail RS-422/RS-485 Data-Line Surge Protector SPD001A To power six converters or repeaters—or four fiber drivers— order… DIN Rail 12-VDC Power Supply PSD100 DIN rail is an industry-standard metal rail, usually installed inside an electrical enclosure, which serves as a mount for small electrical devices specially designed for use with DIN rails. These devices snap right onto the rails, sometimes requiring a set screw, and are then wired together. DIN rails are a space-saving way to accommodate com- ponents. And because DIN rail devices are so easy to install, replace, maintain, and inspect, this is an exceptionally conven- ient system that has become very popular in recent years. A standard DIN rail is 35 mm wide with raised-lip edges, its dimensions outlined by the Deutsche Institut für Normung, a German standardization body. Rails are generally available in aluminum or steel and may be cut for installation. Depending on the requirements of the mounted components, the rail may need to be grounded. Technically Speaking ICD105A