Olympia SECURE AS 302 Operating Manual

Table of Contents Before You Start . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 User Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Intended Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 Base Unit in Detail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Positioning the Base Unit and Putting it into Operation . .10 Control Lamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10 Sensors in Detail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11 Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11 Door/Window Contact . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13 Preparing the Secure AS 302 . . . . . . . . . . . . . . . . . . . . . .16 Installing the App . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16 Connecting the App and Base Unit . . . . . . . . . . . . . . . . . . . .16 Secure Light App . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18 Start Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18 Function: home page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19 Using Away Arm Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20 Using Home Arm Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21 Using Disarm Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22 Function: my device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23 Defense Lines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24 Away Arm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24 Away + Home . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25 Always Active . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26

Function: Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27 Setting the Arm Delay . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28 Setting the Ringing Volume . . . . . . . . . . . . . . . . . . . . . . . . . . .29 Setting the Brightness of the Lamps . . . . . . . . . . . . . . . . . . .30 Setting the Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31 Overview of Alarm Modes and Defense Lines . . . . . . . . . . .31 Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32 If Something Does Not Work . . . . . . . . . . . . . . . . . . . . . . . . .32 Restoring the Default Factory Settings . . . . . . . . . . . . . . . . .34 Guarantee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35 Technical Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36 Information on Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38 Declaration of Conformity . . . . . . . . . . . . . . . . . . . . . . . . . . . .39 Further Information and QR Codes . . . . . . . . . . . . . . . . . . . .39

Before You Start Read the operating manual thoroughly and observe all the information contained when using the alarm system. Keep the operating manual in a safe place for future reference. Pay attention to this symbol. Texts which are highlighted by this symbol provide helpful infor- mation on handling the alarm system. User Information The alarm system is a passive security product and has been conceived as a deterrent. Additional measures are necessary to prevent and hinder burglary and theft. You can obtain all the necessary information on this from your local police station. Read the operating instruction manual thoroughly before connecting and starting the system for the first time. The operating manual will help prevent application errors and, at the same time, ensure you can exploit all the techni- cal options provided by the alarm system to the full. Safety Instructions The following safety information applies to the entire document. Read and observe all the warning information to protect yourself and the environment from any harm. Warning! This device can be used by children from the age of 8 and persons with restricted physical, sensory or mental capabilities or a lack of experi-

ence and knowledge as long as they are supervised or have been instructed with regard to safe use of the device and are aware of the potential risks involved with its use. Children must never play with the device. Cleaning and user maintenance may not be completed by children without any supervision. Warning! Risk of fatal injury from elec- tric shock! NEVER use the equipment if you suspect damage to the power plug or equipment or can see damage to the power plug or equipment. Warning! NEVER complete any repairs to the device yourself. Contact our Service department. The device does not contain any parts which the user needs to repair or service. Warning! Risk of suffocation! Children can swallow small parts, packaging and protective foils. Keep the device and packaging out of reach of children. Warning! The air vents in the base unit must not be covered. Do not use the base unit when packed in closed con- tainers.

Caution! Hearing damage through loud alarm signal! Due to legal requirements, the alarm signal continues for a maxi- mum of 120 seconds. The alarm signal switches off automatically after about 120 seconds if the user does not inter- rupt it. Use ear protectors when testing the device. Do not remain in the vicinity of the acoustic alarm for a longer period when it has been triggered. Attention! Risk of property damage through the use of inappropriate batter- ies! The use of inappropriate batteries can cause a loss of function of the device. Only use batteries of the type described in Section “Technical Data”. Attention! Risk of property damage through environmental influences! Prevent environmental influences such as exposure to smoke, dust, vibration, chemicals, moisture, heat and direct sunlight.

Important! Before starting to position the sensors, take into account that walls, ceilings and sources of electrical disturbance can impair wireless communication. Intended Use The Secure AS 302 alarm system, consisting of a base unit, remote control and door/window contact, is intended for use monitoring rooms and buildings and can be controlled via the Secure Light app. Any other use is considered unintended use. Unauthor- ised modifications or reconstructions are not permitted. Only use the alarm system indoors within the permitted ambient conditions. The alarm system is only intended for private use. A condition for complying with the intended use is that the equipment is installed correctly and the information in the manual is observed and maintained. The operating manual must be enclosed with the equipment if handed over to others.

Package Contents Please check the contents of the package carefully. If anything is missing or has been damaged during trans- port, DO NOT put the alarm system into operation! Please note that the water detector and motion detec- tor are not necessarily component parts of the package contents and must be obtained separately. Keep the alarm system packaging in a safe place to protect the equipment from damage should it need to be dispatched in future. 1 Base unit 1 Remote control 1 Door/window contact Batteries (preinstalled) Operating manual

Base Unit in Detail 1 2 6 3 4 5 7 8 1 Loudspeaker 5 Power plug 2 Reset function key 6 Lamp indicator 3 LED on/off function key 7 Arm function key 4 Disarm function key 8 Metal pin

Positioning the Base Unit and Putting it into Operation Only connect the base unit to an individual power socket. Do not connect the base unit to a connector strip or multi- ple socket. Locate the base unit as centrally as possible so that there is an optimum connection to all the sensors registered. 1 Plug the base unit in an easily accessible, properly installed, earthed power socket. Pay attention that the function keys face upwards or towards you because this simplifies operation. Control Lamp The table below indicates the various states of the control lamp on the base unit. The brightness level of the control lamp can be adjusted via the app. Away arm Red Home arm Blue Disarm Green Switching Off the Control Lamp If you want to switch the control lamp off, press the LED on/off function key on the base unit. The control lamp goes out, the last alarm mode set remains active. Press the LED on/off function key again to switch the control lamp back on.

Sensors in Detail This section explains the preparations necessary to con- nect the sensors to the base unit, connection to the base unit and assembly at the installation location. This operating manual contains descriptions and informa- tion on the remote control and the door/window contact. Other sensors, such as motion detectors, water detectors and glass breakage detectors are available on option. Visit us at www.olympia-vertrieb.de Remote control 2 3 5 6 4 1 1 Notch (battery compartment) 4 Home Arm function key 2 Disarm function key 5 Arm function key 3 Control lamp 6 Panic function key

Registering the Remote Control on the Base Unit Register the remote control on the base unit. 1 Press and hold the LED on/off function key on the alarm system base unit. You will hear the voice message For connection, trigger the sensor. 2 Press any button on the remote control. You will hear the voice message RC successfully con- nected. The remote control is registered on the base unit and can now be used; further information is provided in sections Using Defense Line with the Remote Control on Page 12 and Panic Alarm on Page 12. Using Defense Line with the Remote Control When you have connected the remote control to the base unit, you can use the remote control to switch the defense line on the alarm system on and off or trigger a panic alarm. Panic Alarm You can trigger a panic alarm when you find yourself in an emergency situation or unfortunate circumstances. Press the button again to deactivate the panic alarm. The remote control must be within communica- tion range of the base unit to trigger a panic alarm and switch the defense lines on and off.

Door/Window Contact 1 3 2 4 5 1 Magnetic contact 4 Battery compartment 2 Door/Window contact with transmitter 5 Positioning aids 3 LED Positioning the Door/Window Contact The door/window contact serves to monitor the position of doors and windows. Important! Before starting to position the sensors, take into account that walls, ceilings and sources of electrical disturbance can impair wireless communication. Use the assembly material supplied (e.g. to compensate for height diff erences). Clean the installation location of all types of dirt before assembling the door/window contact. 1 Assemble the door/window contact on a window or door to be monitored as illustrated.

2 Pay attention that the distance between the magnetic contact and transmitter is maximally 5 mm when the window/ door is closed. Registering the Door/Window Contact on the Base Unit You must register the door/window contact on the base unit. When the door/window contact is triggered, it sends a signal to the base unit and the base unit alarm sounds. The door/window contact only functions in conjunction with the base unit from the SECURE AS 302 alarm system. 1 Press and hold the LED on/off function key on the alarm system base unit. You will hear the voice message For connection, trigger the sensor. 2 Trigger the door/window contact, e.g. by opening the window or door being monitored. You will hear the voice message Door/Window contact successfully connected. The door/window contact is reg- istered on the base unit and is ready to operate.

Changing the Battery of the Door/Window Contact When the door/window contact batteries are discharged, you receive the corresponding message via the app. Change the batteries immediately in this case. Attention! Risk of property damage through the use of inappropriate batteries! The use of inappropriate batteries can cause a loss of function of the device. Only use batteries of the type described in Section "Technical Data". 1 Open the battery compartment of the door/window contact using an appropriate screwdriver. 2 Replace the old batteries with new ones. Pay attention that the new batteries are is inserted the right way around. 3 Close the battery compartment and tighten the screw using an appropriate screwdriver.

Preparing the Secure AS 302 This section explains the initial steps to take to connect the Secure Light app with the base unit. Installing the App Download the current version of the Secure Light app from the App Store or Google Play Store onto your smart- phone. Or scan the adjacent QR code. Connecting the App and Base Unit You can control the base unit of the alarm system via the Secure Light app. You can then use up to 5 smartphones to switch the various alarm modes on the alarm system on and off and set all the functions provided on the base unit. Ensure that the base unit of the alarm system is connected to an easily accessible power socket as described in Section Positioning the Base Unit and Putting it into Operation on Page 10. Remember that your smartphone must be within range of the base unit in order to connect the app and base unit. 1 Activate the Bluetooth function in the Settings menu of your smartphone. 2 Start the app. 3 Use the metal pin to press in the Reset function key on the alarm system base unit.

The app searches for compatible equipment in the environ- ment. You will hear a voice message Connecting smart- phone, please check the app. 4 Tap on the AS 302 entry in the list of Bluetooth devices. 5 You will hear the voice message Bluetooth connec- tion successfully established. The app and base unit are connected to each other. When the standard setting is active, the sensor connected is assigned to Away arm mode. The assignment of the defense line can be changed at any time. Further information is provided in Section Defense Lines on Page 24. Please note that only one smartphone at a time may be linked to the base unit via the app. When the app and base unit have been connected successfully and you have defined your personal settings, you can close the app.

Secure Light App Start Screen The start screen displays an overview of the alarm modes available, namely Away arm, Disarm and Home arm. 1 Tap on the respective button on the right-hand side of the screen to activate the required mode. The way in which the sen- sors connected respond is explained in the following sections. The bottom section of the start screen contains the home page, my device and Settings functions. 2 Tap on one of these functions. The following pages explain which settings you can defi ne. 2 1

Function: home page The SECURE AS 302 alarm system provides three diff erent alarm modes (Away arm, Home arm and Disarm). The alarm modes are assigned to the defense lines. You can assign all the sensors connected to a defense line. The de- fense lines of the sensors connected defi ne how the base unit responds when a sensor is triggered. Inform all the persons living in your household about the location and functioning principles of the alarm system and sensors con- nected to prevent false alarms, for example.

Using Away Arm Mode When you activate Away arm mode, the circumferential control lamp is red. All the sensors are armed, ready to issue an alarm. If a sensor connected is triggered, a loud alarm signal is issued. You should activate Away arm mode when you leave your apartment or house. Before doing so, check that all the doors and windows provid- ed with a door/window contact are closed. You can switch Away arm mode on and off directly on the base unit, via the remote control or by using the app. 1 Tap on the button marked in the Away arm mode area. The control lamp lights up red and Away arm mode is activated. If you want to switch the control lamp off , tap on the Off button adjacent to the Status-LED section or, alternatively, press LED function key on/off on the base unit. The control lamp is switched off and Away arm mode remains active. 1

Using Home Arm Mode When Home arm mode is used, an acoustic alarm is issued when one of the sensors which is assigned to the 24 hour defense line and/or Away + Home defense lines is triggered. It is recommended to activate Home arm mode during the night. Before doing so, check that all the doors and windows are closed. You can switch Home arm mode on and off via the remote control or by means of the app. 1 Tap on the button marked in the Home arm mode area. The control lamp lights up blue and Home arm mode is switched on. If you want to switch the control lamp off , tap on the Off button adjacent to the Status-LED section or, alternatively, press LED function key on/off on the base unit. The control lamp is switched off and Home arm mode remains active. 1

Using Disarm Mode When Disarm mode is used, you can move freely around the house/apartment without an alarm being triggered. Only the sensors which are assigned to the 24 hour defense line can alert the base unit or remote control. You can switch Disarm mode on and off directly on the base unit, via the remote control or by using the app. 1 Tap on the button marked in the Disarm mode area. The control lamp lights up green and Disarm mode is activated. If you want to switch the control lamp off , tap on the Off button adjacent to the Status-LED section or, alternatively, press LED function key on/off on the base unit. The control lamp is switched off and Disarm mode remains active. 1

Function: my device The my device function can be used to see which sensors are connected to the base unit of the alarm system. You can also adapt the settings of the sensors registered according to your own personal needs or local condi- tions. 1 Tap on the my device option. An overview of sensors connected appears. 2 Tap on any of the sensors to open further information and setting options. The way to assign individual sensors to defense lines is explained in Sec- tion Defense Lines on page 24. 2 1

Defense Lines Away Arm Devices and sensors set to this de- fense line only trigger the base unit when the base unit is in Away arm mode. 1 Tap on the defense line option. 2 Select the Away arm entry from the list. 3 Tap on OK. 4 The sensor selected is assigned to the Away arm defense line. If you assign a motion detector to the Away arm defense line, for example, you can move freely inside the residence as long as the base unit is set to the Home arm defense line (control lamp is blue). 1

Away + Home Devices and sensors set to this defense line only trigger the base unit when the base unit is in Away arm or Home arm mode. 1 Tap on the defense line option. 2 Select the Away + Home entry from the list. 3 Tap on OK. 4 The sensor selected is assigned to the Away + Home defense line. If you assign the door/ window contact to the Away + Home defense line, for example, you can open and close the monitored door and window when the base unit is in Disarm mode (control lamp is green). 1

Always Active Devices and sensors set to this defense line always trigger an alarm on the base unit. 1 Tap on the defense line option. 2 Select the Always Active entry from the list. 3 Tap on OK. 4 The sensor selected is assigned to the Always Active defense line. If you assign the remote control to the Always Active defense line, for example, the remote control is always functional, regard- less of the alarm mode set. 1

Function: Settings The Settings function can be used to defi ne settings for the base unit in order to adapt the response of the alarm system, the brightness of the control lamp and the volume of the base unit alert. 1 Tap on the Settings option. A list of settings which you can adjust on the base unit appears. 2 Tap on the respec- tive entry if you want to adapt the corresponding setting. The settings which you can adjust are described in the corresponding sections of this operating man- ual (Setting the Arm Delay on Page 28, Setting the Ringing Volume on Page 29 and Setting the Brightness of the Lamps on Page 30). 1

Setting the Arm Delay You can set the alarm system to be armed following a defi ned delay. This provides you with suffi cient time to leave the area being monitored after arming the alarm system without actually triggering the alarm signal. You can set an arm delay of between 0 and 90 seconds. During the delay period, you will hear a signal tone issued at intervals of one second. 1 Tap on the arm delay option. 2 Select the required delay from the list. 3 Tap on OK. 4 The delay selected is saved. 1

Setting the Ringing Volume The base unit is equipped with a loudspeaker. Voice messages and acoustic warning signals are issued via the loudspeaker. You can adjust the volume of the base unit. Caution! Risk of hearing damage through loud alarm signal! Due to legal require- ments, the alarm signal continues for a maximum of 120 seconds. The alarm signal switches off automati- cally after about 120 seconds if the user does not interrupt it. Use ear protectors when testing the device. Do not remain in the vicinity of the acoustic alarm for a longer period when it has been triggered. 1 Tap on the ring volume setting option. 2 Select the required volume from the list. 3 Tap on OK. 4 The volume selected is saved. 1

Setting the Brightness of the Lamps The base unit is equipped with a large, circumferential control lamp which also serves as a status indicator for the alarm system. 1 Tap on the lamp brightness setting option. 2 Set the required brightness using the slider control. 3 The brightness selected is saved. 2

Setting the Language You can select the language of the voice messages from the base unit to be in English or German. Press and hold the Disarm function key to switch the lan- guage of the voice output on the base unit. You will hear a short confirmation signal. Overview of Alarm Modes and Defense Lines Defense Mode Alarm Home Disarm Away Arm Away + Home Always Active Green: Sensor reacts (triggers alarm or communicates with base unit) Red: Sensor does not react (no alarm is triggered or does not communicate with base unit)

You have discovered that something is not working. First of all, try and identify the problem and attempt to solve the problem using the solutions suggested. The base unit is not opened when I try to access it via the app. Observe the range for Bluetooth communication (see Section Technical Data on Page 36). Wireless transmis- sion can be impaired by walls, ceilings and other sources of interference. Reduce the distance between the base unit and your smartphone. Pay attention that the Bluetooth function is activated in your smartphone settings. Other Bluetooth devices could interfere with the connec- tion. Switch the Bluetooth function off temporarily for the other devices. I want to register a sensor but the base unit cannot find the sensor. Observe the range for wireless communication (see Section Technical Data on Page 36). Wireless transmission can be impaired by walls, ceilings and other sources of interfer- ence. Reduce the distance between the base unit and the sensor in question. The batteries in the sensor are discharged. Replace the used batteries in the relevant sensor with new ones of the same type.

Download the latest version of the app from the App Store / Google Play Store. Observe the minimum system requirements of the app (see Section Technical Data on Page 36). The control lamp is too bright. The brightness of the control lamp can be adjusted. The adjustment affects each defense line. Navigate to my device - linked to lamp - brightness in the app. Set the brightness for the control lamp here. None of the problems described is similar to mine or the solutions proposed do not help. Try and reset the default factory settings. Observe the information in Section Restoring the Default Factory Settings on Page 34. If this does not help either, contact our Service department. More information is available in Section Guarantee on Page 35.

You have encountered a problem that cannot be solved using the help provided in Section If Something Does Nor Work on Page 32. Try and reset the default factory settings. Restoring the factory settings automatically deletes all the personal user settings. Restore the factory settings before you hand over the alarm system to third parties, for example, or if you encounter a problem which cannot be cleared in any other way. 1 Ensure that the alarm system is connected to the power supply. 2 Use the metal pin and press the Reset function key for 5 seconds. 3 The factory settings are restored on the base unit.

In the case of a defect, please return the device together with the receipt and original packing material to the point- of-sale.

Bluetooth 2.4 GHz, max. range 50 m Max. transmission power Radio: 18,3 mW Bluetooth: 0,47 mW Power supply 110 - 240 V, 50/60 Hz Power consumption Approx. 9 W (standby, without LED) Approx. 58 W (alarm loud and max. brightness of LED) Number of sensors 10 (max.) Alarm volume 110 dB (max.) Dimensions (W x H x D) 80 x 70 x 80 mm Weight Approx. 119 g System requirements (Secure Light app) Bluetooth 4.0 / Android (from Version 4.4) / iOS (from Version 7) Permissible ambient conditions 5°C to 50°C at 5% to 80% rel. humidity

Dimensions (W x H x D) 40 x 40 x 6 [mm] Wireless communication 868 MHz Max. transmission power 0.05 W Permissible ambient conditions 5°C to 50°C at 5% to 80% rel. humidity Door/Window contact Weight Approx. 50 g (including batteries) Batteries 2 x AAA batteries Dimensions (W x H x D) 100 x 22 x 15 mm Wireless communication 868 MHz Max. transmission power 0.05 W Permissible ambient conditions 5°C to 50°C at 5% to 80% rel. humidity

In order to dispose of your device, take it to a collection point provided by your local public waste authorities (e.g. recycling centre). According to laws on the disposal of electronic and electrical devices, owners are obliged to dispose of old electronic and electrical devices in a separate waste container. The symbol indicates that the device must not be disposed of in normal domestic waste! Risks to health and the environment from batteries! Remove the batteries from the equipment before disposing of the device. Never open, damage or swallow batteries or allow them to pollute the environment. They may contain toxic, ecologically hazardous heavy metals. You are legally obliged to dispose of batteries at shops which sell batteries or at collection points provided by the public waste authori- ties. Disposal is free of charge. The symbol indicates that batteries must not be dis- posed of in normal domestic waste and that they must be brought to collection points provided by local public waste authorities. Packaging materials must be disposed of accord- ing to local regulations. Information on Handling Batteries Correctly Always use the battery types specified in Section "Techni- cal Data". Never mix the battery types used. Remove the batteries if the devices will not be used for a longer period of time.

Olympia Business Systems Vertriebs GmbH, Zum Kraftwerk 1, 45527 Hattingen hereby declares that this device fulfils the basic require- ments and other relevant provisions stipulated in the Directive 2014/53/EC. The CE mark on the device confirms its conformity. Further Information and QR Codes Further information on the Declaration of Conformity for this product is available at http://productip.com/?f=5766f or scan the QR Code. Further information on the optionally available sensors such as water, glass breakage and motion detectors is available at www.olympia-vertrieb.de

12/2017 Article Numbers Base unit 5990 Door/Window contact 5991 Remote control 5992