Felsenmeer SHALOSH ECO Operating Instructions Manual

Size 115 mm x 43 mm x 26 mm, plus clip Weight approx. 100 g (with clip) Protection class IP 65 (dustproof and splash water resistant) Battery type 3.7 V Lithium-Polymer rechargeable battery, 1.2 Ah Operating duration Talk time up to 8 hours Operating time • with indoor locating up to 70 hours • with outdoor locating up to 28 hours • without locating up to 200 hours Charging time Less than 5 hours Frequency bands 900 MHz, 1800 MHz and 2100 MHz ISM for indoor locating and Gateway: 863MHz- 870MHz Transmitting power 33dBm at 900 MHz, 30 dBm at 1800 MHz, 24 ...

If the worker normally moves much, you can use the no movement alarm. If the worker normally walks instead of running or jumping, it is pos- sible to set the fall detection to the most sensitive setting. If jumps or sprints part of the normal sequence, then it is best to choose a lower sensitivity. At the least sensitive setting, you can at least de- tect if the worker has lost the device. If the lone worker may only leave his place for a short period, then you can use the time alarm - and configure SHALOSH in such a way that it remains switched on in the ...

9.3.1.4 Deadman or time alarm 9.3.1.5 No response 9.3.1.6 Loss alarm With signalling the pre-alarm Loss alarm as silent alarm 9.3.2 Alarm per button (deliberate alarm) No movement for __ s Pre-alarm Black button within __ s End Movement within _ s End No reaction Alarm No key for _ min Pre-alarm Black button within __ s End No reaction Alarm No network found for ___ s Network found End Pre-alarm at device Find location with network, press black button End No network Alarm at the Control Center Device not in holster for __ s and no button Pre-alarm Black bu ...

8 5.2.2 Calling and hanging up SHALOSH can be called like a normal phone. The status LED lights up green and SHALOSH is ringing. Calls are answered by pressing the green button. If the lone worker takes the call with the green button, then SHALOSH works like a normal phone, i.e. it has to be held against the ear. SHALOSH uses the following rule of thumb: If the lone worker takes the call with a keystroke, then he can also hold SHALOSH to his ear. This allows him to also make calls if there are loud ambient sounds. Pressing the green button again switches to hands free mode ...

Flashes five times per second red During device test: Flashes twice per second red If device error: Steady red In normal operation: Steady red: Incoming calls from headquarters If pre-alarm: Flashes once per second red: Pre-alarm active If alarm: Alarm triggered and in process. Alarm button Short keystroke (<1s): Switches device on and triggers alarm Moves to the next test during device test In normal operation, starts time interval again for the time alarm Medium keystroke (>1s): In normal operation, triggers deliberate alarm. Is quitted by the vi ...

9.4.1 Variant: First message, then call In order to make use of this process, please configure the option “SMS4Call”. We recommend a value of 3s. Initially, a message is sent to headquarters, three seconds later the call is started. Whilst the call is in process, a message is also sent to the recipients with lower priority. Alarm Message per •Text message to •___________ •___________ •Internet to ___ •Gateway to ___ Call to •_____ •_____ •If no one can be reached: SOS ___________ Telephone call •What happened where? SHALOSH makes noise (acou ...

during an accident and how the device serves as safeguard for the lone worker. Exemplary alarm chains can be found in section 9.3, they have to be adopted to the relevant situation. 7 Safety instructions To ensure the intended use as well as the safety, reliability and per- formance of the device, please read the following instructions be- fore first commissioning. Do not hold the rear loudspeaker to your ear. This may lead to per- manent hearing damage. If you have a pacemaker or wear other electronic medical aids, then please keep a distance of at least ...