Crux BTS-TY2 Manual 

- USB music playback with track up, track down and folder controls from the radio panel or steering wheel controls. - Adds 3.5mm auxiliary audio input. - Hear turn-by-turn Navigation App Voice Prompts on your car audio system while in Bluetooth mode. - USB port on the module can also be used to charge your phone. - Magnetic phone mount included. SCION 2004-2008 tC 2003-2008 xA 2003-2008 xB TOYOTA 2003-2008 4Runner 2003-2008 Avalon 2005-2008 Camry 2003-2006 Camry Solara 2003-2008 Celica 2005-2008 Corolla 2007-2010 FJ Cruiser 2004-2008 Highlander 2003-2008 Land Cruiser 2005-2008 Matrix 2003-2005 MR2 2003-2008 Sequoia 2004-2008 Sienna 2005-2008 Tacoma 2003-2008 Tundra 2007-2008 Yaris 1. Radio must have a 12-pin (6 + 6) CD changer port. 2. The BTS-TY2 replaces the CD changer if present. Rev.081116 1/2 Navigations Apps iPod, USB flash drive and 3.5mm cable not included.

2. Locate the 12-pin (6 + 6) CD changer port. If there is a connector plugged into this cavity, you need to unplug it. The BTS-TY2 replaces the CD changer. 3. Plug the 12-pin connector of the BTS-TY2 to the CD changer port of the radio. 4. If the line-in feature will be used, plug a 3.5mm to 3.5mm cable (sold separately) to the BTS-TY2 module and run towards the desired location. 5. If a USB flash drive will be used, plug in a male to female USB cable (not included) to the BTS-TY2 module and run to the desired location. 6. You can also mount the BTS-TY2 to an easily accessible location such as the center console or glove box, to use the 3.5mm line-in and USB features. 7. Test the system for functionality before putting back the radio. For Bluetooth function: 1. Turn on the radio and press the CD button. Screen will show “CD1 01”. 2. Go to the Bluetooth menu on your phone and connect to “Crux BT”. 3. BTS-TY2 will announce when the phone has been connected. 4. Play the music on your phone and audio should be heard on the factory sound system. For USB Mode: 1. Plug in your USB flash drive to the BTS-TY2 USB port. 2. Turn on the radio and press the CD button. Screen will show “CD1 01”. 3. BTS-TY2 will announce “USB Mode”. 4. USB Audio should be heard on the factory sound system. You can use either the radio control panel or steering wheel controls as follows: TRACK UP & DOWN = change music track Up or Down DISC UP & DOWN = change music folder For Line-In Mode: 1. Plug in a 3.5mm to 3.5mm cable (sold separately) to the BTS-TY2 USB line-in jack. 2. Turn on the radio and press the CD button. Screen will show “CD1 01”. 3. BTS-TY2 will announce “Line-In Mode”. 4. Plug the other end of the 3.5MM cable to the audio player and press play. Audio should be heard on the factory sound system. Magnetic Phone Mount Assembly: 1. Pop-in magnetic head to base socket. 2. Tighten locking nut and adjust to desired tilt. 3. Slide into the AC vent grille. 4. Use the desired metal plate size and stick on the back of the phone or insert behind the phone case. Rev.081116 2/2