Inter-m RFA-102 Operation Manual

1 RFA-102 Contents Contents Unpacking .......................................................................................................................................2 Installation Environment....................................................................................................................................2 Important Safety Instructions.............................................................................................................2 Features...................................................................................................... ...

11 RFA-102 Block Diagram Block Diagram �������� �������� ����� ��� ����������� ���������� ������� ����� ����� ������� ���� � � ����� ���� ������������ ��������� � � � � � � ����������� ��������� ����������� ���������� ���������� ������� ��� ...

Welcome Welcome A personal welcome to you from the management and employees of Inter-M All of the co-workers here at Inter-M are dedicated to providing excellent products with inherently good value, and we are delighted you have purchased one of our products. We sincerely trust this product will provide years of satisfactory service, but if anything is not to your complete satisfaction, we will endeavor to make things right. Welcome to Inter-M, and thank you for becoming part of our worldwide extended family! RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION CAUTION: TO REDUCE THE RI ...

12 RFA-102 Specifications Specifications RFA-102 THD (@0dBFS, 1kHZ) Less than 0.1% S/N (@0dBFS, 1kHZ) Better than 70dB Output Level (@0dBFS, 1kHz) XLR 16±3dBV RCA 16±3dBV ETHERNET(LAN) 10/100 Base-T Operating Temperature -10℃ ~ +40℃ Power Source AC 220-240V, 50/60Hz, DC 24V Power Consumption 8.5W Weight (Set) 3.08kg / 6.8lb Dimensions (Set) 482(W) × 44(H) × 280(D) mm / 19(W) × 1.7(H) × 11(D) in * Design and specification are subject to be changed for the improvement of product quality without pre notice. ※ DIMENSIONS 440 280 482 44 ...

6 RFA-102 ‘CONNECTION FAIL’ implies connection instabiliy. Receiving speed is displayed when CH ▼ button is repressed on Connection status display. 4-4 Upgrade screen While a firmware is being updated, ‘UPGRADE…’ message is appeared in the screen. 4-5 Factory reset screen While a firmware is being updated, ‘FACTORY…’ message is appeared in the screen. 4-6 Display OFF screen The display is will be off when there is no operation detected for 3 minutes. 5. POWER LED This LED is on when the amplifier is active and powered. DISPLAY / STATE CONNECTION FAIL - DISPLA ...

10 RFA-102 System Connection System Connection Router 또는 네트워크 스위치 Control PC RFA-102 AOE-212N POWERED SPEAKER PA AMP Network (LAN/WAN) Audio Network ...