GIC ASTRO MINI T2DDT7 Easy Manual

• Latitude/Longitude precise to the minute with time zone • Sunrise/Sunset or Twilight rise/set trigger modes • Ease of Programming & Navigation • DST, Offset, OFF Hours, Weekly OFF features • 12/24 Hour display format • 6 years Battery reserve • Easy Manual Override & Keypad Lock feature • Ideal for Outdoor & Street lighting applications Cat. No. T2DDT7 Parameters Supply Variation Frequency Power Consumption 110 - 240 VAC 50/60 Hz 6 VA Programming Number of Operating Modes Description of Modes 3 1 min • AUTO • ON AUTO • AUTO OFF As per user defined program settings Instant ON up to next Auto Event Instant OFF up to next Auto Event - - - T2DDT7 T2DDT8 110 - 240 VAC, Astronomical Time Switch - Astro Mini, 1 C/O 110 - 240 VAC, Astronomical Time Switch - Astro Mini, 1 C/O (With Pre-defined City codes) Description Cat. No. Clock Accuracy Power Reserve from Factory ± 2 s/day max. over the Operating Temperature range 16A (For 'NO') & 5A (For 'NC') @ 240 VAC / 24 VDC (Resistive), 1 C/O 4 3x10 4 5x10 Storage Temperature Operating Temperature -10°C to + 60°C -10°C to + 55°C 6 Years Inductive (cos ø = 0.6) :- 6 A @ 250 VAC ORDERING INFORMATION Degree of Protection IP 20 for Terminals, IP 40 for Enclosure Applications Utilization Category AC - 15 DC - 13 Rated Voltage (Ue): 120/240 V, Rated Current (Ie): 3/1.5 A Rated Voltage (Ue): 24/125/250 V, Rated Current (Ie): 2.0/0.22/0.11 A Humidity (Non Condensing) 95% (Rh) Certification Relay Output Contact Rating Electrical Life Mechanical Life Output Enclosure Flame Retardant UL94-V0 Dimension (W x H x D) (in mm) 36 X 90 X 65 LED Indication Red LED Relay ON 110 g Weight (unpacked) Mounting Base / DIN rail Minimum Switching Time Display 3 Lines Text LCD Trigger Modes Offset OFF Hours Weekly Off DST Based on Latitude/Longitude precise to the minute with time-zone Sunrise/Sunset or Twilight Rise/Set 1 min to 10 hr 59 min (Programmable) Programmable User Defined User Defined Street lighting applications in cities, industrial townships, university campuses Lighting automation in sports complex, hotels, parks & other outdoor applications. Supply Voltage ( ) -20 % to +10% (of ) RoHS Compliant Astronomical Time Switch EMI / EMC Harmonic Current Emissions IEC 61000-3-2 Ed. 3.0 (2005-11) Class A ESD IEC 61000-4-2 Ed. 1.2 (2001-04) Level II Radiated Susceptibilty IEC 61000-4-3 Ed. 3.0 (2006-02) Level III Electrical Fast Transients IEC 61000-4-4 Ed. 2.0 (2004-07) Level IV Surges IEC 61000-4-5 Ed. 2.0 (2005-11) Level IV Conducted Susceptibilty IEC 61000-4-6 Ed. 2.2 (2006-05) Level III Voltage Dips & Interruptions (AC) IEC 61000-4-11 Ed. 2.0 (2004-03) Level All 7 Levels Conducted Emission CISPR 14-1 Ed. 5.0 (2005-11) Class A Radiated Emission CISPR 14-1 Ed. 5.0 (2005-11) Class A Environmental Cold Heat IEC 60068-2-1 Ed. 6.0 (2007-03) Dry Heat IEC 60068-2-2 Ed. 5.0 (2007-07) Vibration IEC 60068-2-6 Ed. 7.0 (2007-12) 5g Repetitive Shock IEC 60068-2-27 Ed. 4.0 (2008-02) 40g, 6ms Non-Repetitive Shock IEC 60068-2-27 Ed. 4.0 (2008-02) 30g, 15ms CITY CODE CHART* Setting AM/PM (12 Hour) or 24 Hour Display Cat. No. : T2DDT8 T2DDT7 ASTRONOMICAL TIME SWITCH TERMINAL DETAILS : CONNECTION DIAGRAM: OVERALL DIMENSIONS: Use Copper Conductors Only, 60/75° C. L N 15 TS N P RoHS Base / Din Rail Mounting 68.5 45.0 36.0 100.0 C/C 90.0 15 16 18 L N MAN RST ESC OK DIN RAIL 35mm 65.0 17.0 0.54 N.m (5 Lb.in) Terminal screw - M2.5 1 x 0.2....3.3 mm Solid Wire 1 x 24 to 12 3.5 mm AWG NO NC 18 16 LOAD NOTE: CAUTION: FAQ’s (FREQUENTLY ASKED QUESTIONS): Q.6:I want to switch OFF the output of Astro for a particular time interval without affecting the main program. Which feature should I use? A.6:You can use ‘OFF-Hours’ feature to switch OFF the output for a particular time period. To set OFF Hour feature, select‘OTH’ menu and then select ‘OFHR’. Q.2:What is Manual switching (override)? When do we use it? A.2:When it is desired to switch ON/OFF the output before the actual event i.e. (ON/OFF event), manual override can be used. Press the MAN key for 3 s to toggle between ON Auto & Auto mode when relay (output) is OFF and to toggle between Auto OFF or Auto mode when the output is ON. Q.3:What should I do to reset all settings and Clock? A.3:Press the Reset (RST) key. All settings will set to default and the clock will be reset to 00:00 & the date will be set to 01/01/2000. Q.4:How should I change clock format from 12 h to 24 h? A.4:Press ‘ ’ & ‘MAN’ key to switch from 12 h to 24 h clock format and vice versa. Q.5:How does ON AUTO and AUTO OFF feature help? A.5:ON AUTO / AUTO OFF feature is used to immediately switch the output ON / OFF respectively, overriding the current output condition. If the output ON time is 6:15 p.m. & we want to switch ON the output earlier, at 5:30 p.m. then set the mode as ‘ON Auto’. The output will be switched ON immediately. The mode will automatically change to ‘Auto’ at 6:15 p.m. which is the next auto event. Similarly the output can be switched OFF earlier than the output OFF time using the Auto OFF feature. Q.1:In the event of power failure, do I lose all settings in the device? A.1:No, the battery has a power reserve of approx 6 years at operating temperature range. In the absence of mains supply, we can program the device as per the requirement. However, during power failure, the relay or LED will not operate but the relay status can be observed on the screen. Q.7:How can I switch the output ‘ON’ 30 min after sunset? A.7:Use the Offset feature to change the ON time or OFF time of the output. To set offset, select ‘OUT’ menu and then select ‘OFSR’ to set offset for rise & ‘OFSS’ to set offset for set. To switch ON the output 30 min after sunset, set ‘OFSS’ as ‘POS’ (positive) and enter the time as 30 min. Q.8:I'm using Astro for my company's street lights and I want these lights to be switched OFF from Saturday evening to Monday morning. Which feature should I use? A.8:You can use the Weekly-OFF feature for this purpose. To use this feature, select ‘OTH’ menu and then select ‘WOFF’. Then select ‘SA’ as the start day. Enter the start time in hours and minutes. Similarly, enter ‘MO’ as the end day and time in hours and minutes. If you have selected same day & time for start as well as end, then ‘WOFF’ is not applicable. 1. Always follow instructions stated in this manual. 2. Before installation ensure that the specifications agree with the intended application. 3. Installation should be done by skilled electrician only. 4. Inductive loads should be equipped with interference supressors like varistors, RC snubbers. 5. Use of contactors is recommended if load exceeds the contact rating. 1. If DST is applicable in your region, first set the DST and then set the clock. 2. Due to properties of some lamps, it might take a few minutes for the lamps to illuminate completely even after the output has been switched ON. 3. Product innovation being a continuous process, we reserve the right to alter specifications without prior notice. Viewing the Output ON & OFF Time for the Day ON Ouptut OFF Time Output ON Time AUTO ON OFF 00:00 07:07 18:10 SA To view OFF & ON time for the day, press ‘ ’ & ‘ ’ respectively. This is possible only when the device is in run mode & not in edit mode. To change the time format from 12 h to 24 h & vice versa, press ‘ ’ & ‘MAN’ keys simultaneously. To view the city code chart number, press ‘ESC’ key 4 times. In case the city code chart is lost or misplaced, order the city code chart by sending an email to: [email protected] or [email protected] or download it from: www.gicindia.com ®Mini

Time Zone: (GMT - 6:00) Latitude: N 42° 08'; Longitude: W 87° 50’ Date: 1 January 2010; Time: 11:30 A.M. End - 4th Sunday of October DST: SETTING THE ASTRONOMICAL PARAMETERS (EXAMPLE: NORTH BROOK) End Hour End Minute End Day E E E hh:00 Mm:00 Day Start Hour Start Minute Start Day S S hh:00 Mm:00 Day SU S Positive Negative PoS Ne6 oUT Twilight Offset Set OFF-Hour Weekly-OFF LoC Minute Mm:00 OK Minute Mm:00 OK Minute Mm:00 OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK OK t t t t t t TULt ofss Disabled No Enabled Yes Offset Rise ofsr Negative Ne6 Minute Mm:00 PoS Positive Year Date Month Date Date Yy:10 Mt:01 Dt:01 Hour Time Minute Time hh:11 Mm:30 Dst No AUTO 00:00 Dt:tm SA OK OK OK OK OK OK OK OK OK OK t t t t t Enabled Disabled Start Week Start Month End month End Day Yes S S E E We:03 Mt:03 Mt:10 Day SU L018 City Code* * Indicates this option is available only for Cat. No. T2DDT8. For specific city codes, programming procedure refer city code chart OK t OK OK OK OK OK Lat Lon6 North Nth Degree D 0 42 Minute M 08 East East West Degree Minute West D 0 87 M Latitude 6mt Hour Minute Negative hh:06 NE6 Mm:00 GMT Longitude OK OK OK OK t t t Start Minute Start Hour End Hour S S hh:00 hh:00 Mm:00 e oth OFhr woff DTTM (Date - Time) LOC (Location) OUT (Output) OTH (Other Features) BASIC FEATURES: Offset: Offset is used to switch ON the output before or after the sunset or switch OFF the output before or after sunrise. This can be achieved through the ‘oFSr’ (Offset Rise) and ‘oFSS’ (Offset Set) parameters in the OUT menu. The range for the Offset is +/- 00 to 99 minutes. Trigger Modes: The output can be programmed to switch OFF/ON either at sunrise/sunset or at twilight rise/set. If the trigger mode ‘Twilight’ in the ‘OUT’ menu is set as ‘Yes’, then the output will be switched OFF/ON at twilight rise/twilight set. If it is set as ‘No’, then the output will be switched OFF/ON at Sunrise/Sunset. Day-light Saving Time (DST): ASTRO provides settings to easily define the DST start and end period time to effectively manage the shifting of clock, year after year without any manual intervention. Weekly OFF: The Weekly Off feature is used to switch OFF the output during Weekend's or Weekly Off days. This feature allows to define the Weekly OFF days including the start and end time. OFF-Hours: The OFF-Hours feature is used to switch OFF the output for a particular time period on a daily basis. For e.g. If the Off Hours programmed are from 23:00 to 02:00, then the output will be switched OFF for these 3 hours everyday. City Code* SU OK OK OK Start Day End Week We:04 OK E S Day SU 50 End Minute e Mm:00 4 ON OFF AUTO 88:88 OK MAN RST PM SU 3 b b ESC c c MO TU WE FR SA TH OFF ON d 1 2 DISPLAY: Cod 9 Following are the four Main Menus & listed below them are the Sub-menus: To Enter in Menu, press OK key & to scroll within menu, press ‘ ’ & ‘ ’. i. LOC (Location): a. Code* b. Lat c. Long d. GMT iii. OUT (Output): a. TWLT (Twilight Mode) b. OFSR (Rise Offset) C. OFSS (Set Offset ) ii. DTTM (Date - Time): a. DST b. Date c. Time iv. OTH (Other Features): A. OFHR (Off Hours) B. WOFF (Weekly Off) t PROGRAMMING PROCEDURE: Important: If DST is applicable at the place of installation of the product, then first enable the DST by selecting ‘Yes’ option for DST in the ‘Clock’ menu and then set the DST period. 2)At the time of dispatch the clock has been set to GMT. So to set the clock to the local time, just change the time zone (GMT) in the ‘LOC’ menu to the local time zone. For e.g. If you are installing the product in India then just change the GMT to ‘+5:30’. The clock will be automatically set to the local time. This feature will not wok if the product is reset by pressing the reset key. In such a case the user will have to manually set the clock as well as GMT. 6) To set other parameters like Weekly OFF & OFF Hours, select 'OTH' menu using 'OK' key. 1)Press 'OK' key to enter the Main Menu Use ' ' & ' ' keys to make selection between 'LOC', 'DT:TM', 'OUT' & 'OTH' and again press OK to select a particular option. 5) To set Trigger mode & Offset, select 'OUT' from the main menu using 'OK' key and then use ' ' & ' ' keys to select between 'Twilight', 'Rise offset' & 'Set offset'. Use 'OK' key for selection & again ' ' , ' ' keys to change parameter value. 4) Set the Latitude & Longitude as per the place of installation. To set these parameters, select 'LOC' from the main menu. Use ' ' & ' ' keys to make selection between North & South for latitude and East or West for Longitude. Set the values by using ' ' & ' ' keys and then press OK key to confirm the values. 3)To set the clock, select 'DT:TM' from the main menu by pressing 'OK' key. Now use ' ' & ' ' to make selection between 'DST', 'Time' & 'Date'. Use 'OK' key for selection & ' ' , ' 'keys to change parameter value and again press OK to confirm the changes. 1. AUTO: As per set program. 2. ON AUTO: Manual ON up to next auto event. 3. AUTO OFF: Manual OFF up to next auto event. MODE DESCRIPTION: MENU: ON To lock the keypad, press the ‘ ’ and the ‘ESC’ key simultaneously for 3 seconds. ‘bLoC’ will appear on the screen indicating that the keypad has been locked. When the keypad is locked none of the parameters can be edited, only the mode can be changed from ‘Auto’ to ‘ON Auto’ and ‘Auto OFF’. To unlock the keypad, repeat the same procedure. The keypad can be locked only in Run mode and not in Edit mode KEYPAD: KEYPAD LOCK: Relay Status Indication d : DST Enabled; Day of week display : Hours/minute indication (HH:MM) : : : : : : : 2 2 3 3 4 4 1 Mode Menu scroll up / Increase parameter value OR To view output OFF time in Standby mode Menu scroll down / Decrease parameter value OR To view output ON time in Standby mode To enter the programming mode, select a particular parameter to edit and apply the changes. Exit the programming mode OR 12/24 hour clock mode selection alongwith MAN key Previous Menu / Undo Change OR To lock / unlock keypad alongwith key Reset Key to Reset programs or settings to the default Relay 'ON/OFF’ LED indication. Manual Override Key OR 12/24 clock mode selection alongwith key MAN ESC OK RST : : : : : : : : : : : : To change the mode from ‘Auto’ to other modes & vice-versa, press ‘MAN’ key for 3 seconds. The Auto option at the bottom of the screen will change to ‘ON Auto’ or ‘Auto OFF’ depending on the output status.