Evotech 11999 Installation Instructions Manual

TAIL TIDY Product Reference - 11999 Kit Contents A 1 x Main Mounting Bracket B 1 x LH Arm C 1 x RH Arm D 1 x Licence Plate Holder E 1 x Reflector and Bracket F 1 x Cable Bracket (1200 Only) 1 x Licence Plate Light G K 2 x M5 - 50 Button Head Screws 2 x Indicator Mounting Plates J 2 x M3 - 12 Button Head Screws M O 2 x Screw Head Caps 2 x Number Plates Screws and Nuts N 1 x Wiring Connector Loom (1200 Only) H P 2 x Pair Bullet Connectors (1200 Only) Q 2 x Male Spade Connectors (821 Only) R 2 x Indicator Extension Wires (821 Only) S 2 x M8 - 25 Button Head Screws (821 Only) T 2 x M8 Mounting Spacers (821 Only) U 2 x M8 Custom Washers (821 Only) V 3 x M8 - 10 Button Head Screws (1200 Only) W 3 x M6 Trunions X 3 x M6 - 16 Countersink Screws Y 4 x Indicator Adapters Z 4 x Mounting Bosses AA 4 x M6 Custom Washers BB 4 x M6 - 12 Button Head Screws 6 x Cable Ties CC 2 x Indicator Arms I 2 x M5 - 12 Cap Head Bolt L

light cable back to the main loom. Ensure any other cables that are un-clipped are re-clipped once light cable has been moved

light cable along rear sub-frame. Leave lose on top at this stage.

the left hand side of the bike. Route the licence plate light from stage 6 under sub-frame to the same location as the indicator wires.

grab handles and undertray ensuring they are free to move

plate does not contact the rear tyre when suspension is fully compressed. Ensure all electrics including indicators, tail light, brake light and licence plate light lights are working correctly before riding the motorcycle. It is recommended that periodic inspections are made to ensure that all fixings are fully tightend.