GEZE ECturn Wiring Diagram

8.2 Push button (potential-free contact) à Plastic elbow switch, white, mat. no. 114078 à Plastic elbow switch, stainless steel, mat. no. 114077 à Stainless steel elbow switch, mat. no. 119899 à Stainless steel elbow switch LS 990, surface-mounted, mat. no. 128582 à Stainless steel elbow switch LS 990, flush-mounted, mat. no. 128583 à Accessories: à IP65 switch insert, mat. no. 114156 à Additional contact, mat. no. 114157 à Radio transmitter module WTM, can be clipped in, mat. no. 131212 à Back panel for plastic elbow switch, à white, mat. no. 131219 ...

à Set 10 a1 (configurable output) to 02 for the "fault" function. à The output contact closes as soon as the con- trol detects a system fault. At the same time the corresponding error number is indicated at the TPS and at the service LEDs. PA 55 PA1A 56 PA1B 1 GND 56 24VTOE 12.3 Door opener à A working current door opener or a static current door opener can be connected as a door opener. In addition, close pressure can be configured before opening in order to take the strain off the door opener. à Switching voltage/current ...

6 Safety sensor opening and closing à At detection the output of the sensors is open (GND is applied to the SIS or SIO input). X Check function and correct setting of the sensors when putting into service and when servicing the assembly. 6.1 Safety sensor GC 338 à Follow installation instructions GC 338, mat. no. 142272 à GC 338 interface, mat. no. 143072 à GC 338 transmission module, mat. no. 143060 à GC 338 receiver module, mat. no. 143071 à Accessories for setting the light curtain: Spot- finder, mat. no. 112321 Setting the DIP ...