EVERSPRING AC136 Manual
Text of the manual
The AC136 Panic Button is a Z-Wave PlusTM enabled device and is fully compatible with any Z-WaveTM
enabled network. The device can be set up in a Z-wave network to communicate directly with other end
devices such as lighting controllers, or to report directly a Z-wave controller (usually a gateway).
The Panic Button is a portable wireless
Do not put the unit in humid or dusty places or facing direct sunlight.
2.
Do not place the unit near combustible substances or any source of heat, e.g. fires, radiators,
boilers etc.
3.
The suitable ambient temperature for the unit is -10°C - +40°C.
Low Battery: The Panic Button will inform the Gateway when its battery runs low. Also, if th
ID to the unit.
For 2 minutes
Auto Inclusion
The power is applied for the first time and no node
ID has been stored in the module, or after
executing reset.
Manual Inclusion
1. Put the Z-Wave Controller into
inclusion mode.
2. Press the link button 3 times within 1.5 seconds
to put the unit into inclusion mode.
Exclusion
1. Put the Z-Wave Controller into exc
