EK E3 Spot Operation & User’s Manual

Download EK E3 Spot PDF Manual (10 pages)

Text of the manual

SAFETY DIMENSIONS DESCRIPTION INTRODUCTION POWER LINKING PHOTOMETRICS 01 02 03 03 05 05 General Instructions All work must always be carried out by qualified technical personnel. Contact the nearest sales point for an inspection or contact the manufacturer directly. SAFETY Before carrying out any operations with the unit, carefully read this instruction manual and keep it for future reference. It contains important information about the installation, usage and maintenance of the unit. WARNING 01 TECHNICAL SPECIFICATIONS 08 FUNCTION MENU 09 MENU DESCRIPTION 10 DMX CHANNELS 12 TROUBLESHOOTING 17 DMX CONNECTION 06 GOBO MOUNTING AND REPLACEMENT 07 The products referred to in this manual conform to the European Community Directives. Leave servicing to skilled personnel only. Never make any modifications on the unit not described in this instruction manual. Connection must be made to a power supply system fitted with efficient earthing (Class I appliance ac- cording to standard EN 60598-1). This unit is not for home use, only professional applications. Never use the fixture under the following conditions: -in wet conditions; -in places subject to vibration; -in places with an ambient temperature of over 45°C Make certain that no inflammable liquids, water or metal objects enter the fixture. If the unit is to be put out of operation definitively, take it to a local recycling plant for a disposal Warnings and installation precautions If this device will be operated in any way different to the one described in this manual, it may suffer damage and the guarantee becomes void. Before starting any maintenance work or cleaning the projector, cut off power from the main suply. Always secure the projector with safety rope when mounting. When carrying out any work, always comply scrupulously with all the regulations (particularly regarding safety) currently in force in the country in which the fixture’s being used. For inside use only. Not designed for outside use. The minimum distance between the fixture and surrounding walls must be more than 50cm and the air vents at the housing must not be covered. Install the fixture in a well ventilated place Keep any inflammable material at a safe distance from the fixture. The maximum temperature that can be reached on the external surface of the fitting, in a thermally steady state, is high. After power off, please cool down over 15 minutes. Never look directly at the light beam. Please note that fast changes in lighting, e.g. flashing light, may trigger epileptic seizures in photosensitive persons or persons with epilepsy.

Compact, quick, feature-packed moving head

1 x 60W OSRAM RGBW LED Infinite RGBW color mixing with 7 gobos + open Ultra smooth dimming and perfectly consistent color mixing Advanced optical system projects saturated colors Flawless motorized pan/tilt movement and gobo indexing Selectable DMX channels 15/18/23 INTRODUCTION 03 02

increase numeric values

decrease numeric values confirm DMX signal indicator power indicator status indicator status indicator menu navigation scroll up scroll down Function Description Function Function OLED Display Function Description save the parameter right scroll right www.eklights.com 5/ 6/ 7... Power In Power Out Using POWER CON In/Out Power cable connected in series Attention：connect 9 units maximum WARNING Do not connect more than maximum allowable number of fixtures Do not use damaged power cables. Turn off power when the units are not in use. POWER LINKING 18° 1 3 5 7 10 605 308 15138 151 1682 Beam Angle 18° 202.36 374.3 82.231 524.58 1069 Luminance / Luminous Flux Luminance Luminous Flux (LM) (LX) 1m 3m 5m 7m 10m R 2808 312 112.32 57.3 28.08 G 5599.8 622.2 223.99 114.2 55.998 B 621 69 24.81 12.67 6.21 W 7940.7 882.3 317.628 162 79.407 ALL 15138 1682 605.52 308.93 151.38 PHOTOMETRICS STANDARD GOBOS 12. Clamp Fast Holder 11. Main Fuse Holder 10. In DMX 3-Pin XLR 1. Safety Rope Mounting Hole 13. Down 14. Confirm 15. OLED Display 16. DMX Indicator 2. Handle 3. Power Indicator 5. Up 6. Right 7. POWER CON In 8. POWER CON Out 9. DMX 3-Pin XLR Out 4. Left INTRODUCTION PANEL INTRODUCTION 05 04 1 2 3 4 menu navigation Beam Angle Projection Distance (m) Luminance (lux)

Follow above method for subsequent fixtures, calculating starting addresses as indicated.

STARTING ADDRESS MODE ALLOCATION STARTING ADDRESS STARTING ADDRESS STARTING ADDRESS 046 15CH 23CH 001-001 001 016 031 071 002-024 002 025 048 Relation between DMX and Address 18CH 056 002-019 002 020 038 07 06 DMX512 Controller DMX Signal Cable DMX Signal Cable DMX Signal Cable DMX CONNECTION 2 3 5/ 6/ 7.. 1 4 Rotating Gobos Spring Gobo Gobo Holder Change gobos easily GOBO MOUNTING AND REPLACEMENT DMX INPUT 1 3 2 1 3 2 COMMON DMX十 DMX OUTPUT DMX一 1ST FIXTURE 2ND FIXTURE 3RD FIXTURE 4TH FIXTURE

Power Connection：POWER CON In/Out

Data Connection：3-Pin XLR DMX In/Out Photometrics: Light Source：OSRAM 60W RGBW LED Beam Angle：18° Output：606 LUX @5 meters Key Features: Color Mixing：RGBW Rotating Gobos: 7+1 Strobe：0-30HZ Dimming: 4 dimming curve modes Pan movement: 540° Tilt movemnet:270° Control: Protocol: DMX512 DMX Channels: 15 / 18 / 23 Build- in Program：Yes Display：OLED 128 x 64 Power: Mains：100- 240VAC , 50/ 60HZ Consumption：118W IP rating：IP20 Thermal Cooling : Active( variable speed fan) Max.Ambient: 40° Min. Ambient:- 20° Max Housing: 62° Physical Dimension: 250*208*332MM Weight: 6. 87KG Misc/Options Power Cord: Neutrik POWER CON Omega Bracket：Included (1 pc) Flight Case：Optional 09 08 MENU NO. Main Menu Menu level 2 Menulevel 3 Menu level 4 Remark 1 DMX Functions DMXAddress 1-512 Default ： 1 DMXChannels 15CH Default ： 23CH 18CH 23CH 2 Motor Setup Pan Inverse No Yes Default: No Tilt Inverse No Yes Default: No Motor Pan 000-255 Tilt 000-255 Gobo 000-255 Prism 000-255 Focus 000-255 3 System Setup White Balance Red 125-255 Default ： RGB= 255 Green 125-255 Blue 125-255 DimmerMode Default ： Dimmer1 Dimmer2 Dimmer3 Fan Mode Auto Speed High Speed Default ：Auto Speed Factory Settings No Yes 4 Display Setup Display Inverse No Yes Default :No Back Light On 10S 20S 30S Default ：On Warn Cue On Default ：On

DMX Address : Set DMX sarting address at a value between 001-512

DMX Channels : Select DMX mode 15/18/23 channel operation Motor Setup 2. Pan/Tilt motor offset (for fine tuning pan/tilt position) Adjustments to motor offsets should be made when selected function is at home (DMX = 0) position Display Setup 1. Display Setting: Set delay time for OLED display to go dark after 10, 20 or 30 seconds or choose always ON. System Setup 1.White Balance : Adjust RGB (125-255) levels to achieve desired white light 2.Dimmer Mode: Four selectable dimmer curves: OFF Dimmer 1, 2, 3 (fast, medium, slow ) 3.FAN Setting：Select the desired fan speed: High or Auto 4.Factory Reset: Restore factory settings 1. Auto Test Mode: Test all functions automatically . 2. Manual Test Mode Test each function manually. Note: No controller required to run tests Test Setup Self-inspection Mode: Fixture Information Displays fixture run time, software version and temperature. MENU DESCRIPTION 1. Pan/Tilt inverse on/off selection 3. Gobo / Prism / Focus motor offset (for fine tuning positions) 2. Display Inverse: Select orientation of menu display 3. Warning: Display error codes 11 10 5 Test Setup Auto Test Auto Test … Manual Test Pan 000-255 Default ： Tilt:=128 Dimmer=255 Shutter = 255 Pan Fine 000-255 Tilt 000-255 Tilt Fine 000-255 Pan/Tilt Speed 000-255 Dimmer 000-255 Shutter 000-255 Red 000-255 Green 000-255 Blue 000-255 White 000-255 Gobo 000-255 R Gobo 000-255 Prism 000-255 R Prism 000-255 Focus 000-255 6 Reset Setup Auto Reset No Yes Yes: Reset allChannels Manual Reset Pan Reset No Yes Tilt Reset No Yes Gobo Reset No Yes Prism Reset No Yes Focus Reset No Yes 7 Information Fixture Time 0-9999 Default : 0 Software Version DISP V1.0 CTR-XY V1.0 CTR-LED V1.0 LED Temperature 58°C

Slow to Fast

14 Strobe 000-031 032-063 064-095 096-127 128-159 160-191 192-223 224-255 Shutter closed No function (shutter open) Strobe slow to fast No function (shutter open) in sequences No function (shutter open) Random strobe slow to fast No function (shutter open) 15 Focus 000-255 0- 100% 18CH 15CH Function Value Percent/Setting Remark 1 Pan 000-255 Rotation Angle: 540 2 Pan Fine 000-255 3 Tilt 000-255 Rotation Angle: 270 4 Tilt Fine 000-255 5 Pan/Tilt Speed 000-255 Fast to slow 6 Special Function 000-199 200-209 210-255 No function Reset all (Hold 3 Seconds) No function 7 Red 000-255 0- 100% 8 Green 000-255 0- 100% 9 Blue 000-255 0- 100% 10 White 000-255 0- 100% 11 Gobo 000-007 008-015 016-023 024-031 032-039 040-047 048-055 056-063 064-073 074-082 083-091 092-100 101-109 110-118 119-127 128-189 190-193 194-255 WHITE Gobo 1 Gobo 2 Gobo 3 Gobo 4 Gobo 5 Gobo 6 Gobo 7 Gobo 1 Shaking Gobo 2 Shaking Gobo 3 Shaking Gobo 4 Shaking Gobo 5 Shaking Gobo 6 Shaking Gobo 7 Shaking Left Rotation Fast to Slow Stop Rotation Right Rotation Slow to Fast 12 Gobo Rotation 000-127 128-189 190-193 194-255 Stop Rotation Left Rotation Fast to Slow Stop Rotation Right Rotation Slow to Fast 18CH Function Value Percent/Setting Remark 1 Pan 000-255 Rotation Angle:540 2 Pan Fine 000-255 3 Tilt 000-255 Rotation Angle:270 4 Tilt Fine 000-255 5 Pan/Tilt Speed 000-255 Fast to slow 6 Special Function 000-199 200-209 210-255 No function Reset all (Hold 3 Second) No function 7 Red 000-255 0- 100% 8 Green 000-255 0- 100% 9 Blue 000-255 0- 100% 10 White 000-255 0- 100% 11 Color 000-007 008-022 023-0 37 038-0 52 053-0 67 068- 082 083-0 97 098- 112 113-127 128-189 190-193 194-255 No Function RED YELLOW GREEN CYAN BLUE MAGENTA WHITE FULL Left Run Fast to Slow Stop Run Right Run Slow to Fast 15CH 15CH

Gobo 1 Shaking

Gobo 2 Shaking Gobo 3 Shaking Gobo 4 Shaking Gobo 5 Shaking Gobo 6 Shaking Gobo 7 Shaking Left Rotation Fast to Slow Stop Rotation Right Rotation Slow to Fast 13 Gobo Rotation 000-127 128-189 190-193 194-255 Stop Rotation Left Rotation Fast to Slow Stop Rotation Right Rotation Slow to Fast 14 Prism 000-010 011-127 128-189 190-193 194-255 Prism Of Prism On Left Rotation Fast to Slow Stop Rotation Right Rotation Slow to Fast 15 Strobe 000-031 032-063 064-095 096-127 128-159 160-191 192-223 224-255 Shutter closed No function (shutter open) Strobe efect (slow to fast) No function (shutter open) Pulse-efect in sequences No function (shutter open) Random strobe efect slow to fast No function (shutter open) 16 Focus 000-255 0- 100% 17 Dimmer 000-255 0- 100% 18 DimmerSpeed mode 000-051 052-101 102-152 153-203 204-255 Preset dimmer speed from display menu Dimmer speed mode OFF Dimmerspeed mode1 (fast speed) Dimmer speed mode2 (middle speed) Dimmerspeed mode 3 (slow speed) 23CH Function Value Percent/Setting Remark 1 Pan 000-255 Rotation Angle: 540 2 Pan Fine 000-255 3 Tilt 000-255 Rotation Angle: 270 4 Tilt Fine 000-255 5 Pan/Tilt Speed 000-255 Fast to slow 6 Special Function 000-199 200-209 210-255 No function Reset all (Hold 3 Second) No function 7 Red 000-255 0- 100% 8 Green 000-255 0- 100% 9 Blue 000-255 0- 100% 10 White 000-255 0- 100% 11 Color 000-007 008-022 023-0 37 038-0 52 053-0 67 068- 082 083-0 97 098- 112 113-127 128-189 190-193 194-255 No Function RED YELLOW GREEN CYAN BLUE MAGENTA WHITE FULL Left Run Fast to Slow Stop Run Right Run Slow to Fast 12 Gobo 000-007 008-015 016-023 024-031 032-039 040-047 048-055 056-063 064-073 074-082 083-091 092-100 101-109 110-118 119-127 128-189 190-193 194-255 WHITE Gobo 1 Gobo 2 Gobo 3 Gobo 4 Gobo 5 Gobo 6 Gobo 7 Gobo 1 Shaking Gobo 2 Shaking Gobo 3 Shaking Gobo 4 Shaking Gobo 5 Shaking Gobo 6 Shaking Gobo 7 Shaking Left Rotation Fast to Slow Stop Rotation Right Rotation Slow to Fast

Auto Program Speed

EK E3 Spot Operation & User’s Manual

Text of the manual

TABLE OF CONTENTS