Lovoom Lovoom Operation & User’s Manual

Contents 1. How to connect lovoom : p1 ~ p6 2. If a Fail image is displayed : p7 3. The camera stops on the initial screen : p8 4. Lovoom app. icon description : p9 5. Lovoom app. icon description : 10~p11 6. Setting menu : p12~p13 7. Remote controller / Rotation Disk / LED indication : p14 8. How to clean lovoom inside. (Open the side cover and clean it. when the feed is stuck,) : p15

Android : find ‘lovoom’ at google play Apple : find ‘lovoom’ at Appstore Caution: All access authority must be allowed after installation, and GPS must also be on for installation. Tab [Sign up] for new ID and password Enter ID and password for account creation. Click [Submit]. ID will be in email format from 8 to 30 characters (e.g. [email protected]) Passwords are: 8 characters or more.. How to connect lovoom (1) p1

The lovoom rotates left/right 90 degrees and then heading forward. Tab [NEXT] *Since the Lovoom T20 uses 12V DC power, Do not connect a mobile phone charger or charge a mobile phone. Tab [OK] Make sure the Wi-Fi router is turned on.. How to connect lovoom (2) p2

Verify that RTEST is selected in the Wi-Fi settings menu.. You'll see the ‘ RTEST-xxx-…’ Select ‘RTEST-xxx ‘ Select ‘RTEST-...’ at the wifi list Wait a moment and select if you see 'RTEST- 12345-xxx ' and the letter beginning with RTEST… Ignore any pop-up windows, such as an unknown Internet connection, and go to the Lovoom application. RTEST-12345-xx-xxx Press the Wi-Fi button, wiping out the top right of the mobile phone. Press the Wi-Fi button in the Wi-Fi settings window without shutting down the lovoom app. Refresh button How to connect lovoom (3) - Android (Samsung,LG,Sony etc. ) user p3

Wi-Fi in the mobile phone settings window. Go to the mobile device setup window without shutting down the lovoom app and press the [Wi-Fi] button Refresh button How to connect lovoom (3) - iOS (Apple phone) user p4 Select ‘RTEST-...’ at the wifi list Wait a moment and select if you see 'RTEST- 12345-xxx ' and the letter beginning with RTEST… Ignore any pop-up windows, such as an unknown Internet connection, and go to the Lovoom application. If you can't see it, press the refresh button. Verify that RTEST is selected in the Wi-Fi settings menu.. You'll see the ‘ RTEST-xxx-…’ Select ‘RTEST-xxx ‘

information] blank. Select home Wi-Fi router, You must put the password correctly. (Lovoom doesn’t support 5G). Passwords must have stickers attached to the surface of the Internet router. If you don't know your password, contact your router administrator. Most cases of connection failure occur here. Enter [password] correctly, then tab the [wifi setting] button. Depending on your Wi-Fi environment, it will take some time. KT wifi Ip time 5G Ip time 2.4G p5 How to connect lovoom (4) - iOS / Android

[NEXT] button. Depending on your Wi-Fi environment, it will take some time. If the lovoom is far from the wifi router, the connection fails . If successful, you will see [confirm]. Tab the [confirm] button. You’ll get the same screen as the picture, and in a minute or two, lovoom camera will operate. If the camera doesn't work over time, finish the app, and then log in again, or power the lovoom off and on. p6 How to connect lovoom (5) - iOS / Android

least 10 seconds on the bottom surface of the lovoom. After that, you will need to exit the app and log in again to install it from scratch.. Reason of failure 1) Mobile phone's Wi-Fi functionality is poor. 2) Wrong wifi router password 3) The OS of Phone is not iOS or Android p7 If a Fail image is displayed. - iOS / Android

Delete existing camera in [Camera management] for re- installation. Scroll left and right to see more menus. p8 The camera stops on the initial screen. - iOS / Android

If you scroll through the menu area with your finger, you'll see more menus. p9 If you scroll through the menu area with your finger, you'll see more menus.

[<][>] Lovoom rotates 10 degrees to the left(right) when pressed. Auto button Lovoom throws a total of 30 bits every 10 seconds. (It works in one of three modes /See lovoom setting menu.) Throwing distance control button Each time you press it, the stick increases. Depending on the weight and size of the feed, the flying distance varies slightly. Throw button Each time you press it, the food is thrown. When there is no food, the message is marked Feeder error. Message (status) Camera name [Initial screen] Melody button Melody that is set on setting menu will come out. Speak button While the button is pressed, your voice is transmitted Recording button Once you press it, it'll be recorded in the mobile phone gallery. Once again, it'll stop recording. p10 Lovoom app. icon description (1) Left turn (Max 90 degrees)

Capture and store the moment through lovoom camera in a gallery. Gallery button A gallery where you have saved videos and photos Timer Play 10 bits are thrown at the set time interval (1 to 6 hours). Set timer play setting to 3 modes in the setting menu. Mute button The mute button is always turned on whenever you start the app. Setting menu timer play, auto play setting, camera deletion,5 Melodies setting, dotted line display on/off etc. Center position When you press the button, lovoom rotates left/right and is located in the center of the body. p11 Lovoom app. icon description (2) Right turn (Max 90 degrees) [<][>] Lovoom rotates 10 degrees to the left(right) when pressed. Message (status) Camera name [Initial screen] Left turn (Max 90 degrees)

When deleting a registered camera When changing the wifi password. When the lovoom registration failed. In case of a reset on the Lovoom. In case of deleting existing camera Logout Before logout, remember your ID and password. If you do not remember your ID and password, you will need to start with Sign up again. It is encrypted so that the server administrator can't see it, so the ID and password are managed by user. Timer Mode Mode1 : Rotate left/right 60 degrees in the Timer Span. At the set time span, lovoom throws 10 bits at (low throw power) Mode2 : Rotate left/right 30 degrees every time set in the Timer Span. At the set time span, lovoom throws 10 bits (mid throw power) Mode3 : Rotate left/right 15 degrees every time set in the Timer Span. At the set time span, lovoom throws 10 bits (high throw power) Timer Span Set the interval between 1 to 6 hours for throwing time in timer play. Auto Mode Mode1: Throw 30 bits in small force at the right center position. (rotation angle = 0) Mode2: Throw 30 bits in small force at the right center position. (rotation : left-right 15 degrees) Mode3: Throw 30 bits in small force at the right center position. (rotation : left-right 45 degrees) Setting Menu (1) p12

• If you press and hold the throw button on the remote controller for more than 3 seconds, the melody changes one by one. (1>2>3>4>5>1>2….) Grid Grid-on displays a dotted line on the camera screen. Vibration When vibration is turned on, buttons are in vibrating mode Save Save current setting Exit Exit without saving Setting Menu (2) p13

A rotating plate with a diameter of 5 to 11 in advance food or snack Dry food or snack that can be passed through the hole should be used. CAUTION: When inserting a rotating plate, place it in a diagonal line, and all seven silicon pins must be located on the rotating plate. A rotating plate used for feed or snack with a diameter of less than 5th. Dry food or snack that can be passed through the hole should be used. CAUTION: When inserting a rotating plate, place it in a diagonal line, and all seven silicon pins must be located on the rotating plate. Signal receiving sensor of remote controller. Transmitter of remote controller 회전판 설명 LED Indication Green : Camera is not registered White : Lovoom is powered on /Standby mode Blue: User is logged in. Red : Throwing arm is wrong position

feed is stuck,) When re-engaging the side cover, insert the bottom hook and close the side cover. 1 Put finger in the hole Push toward arrow (Reel Motor) (Swing Arm) (Trigger) (Bucket Sensor) It must be in the above form to ensure normal operation. Remove any feed around the bucket sensor. Normal Operation : When trigger holding the swing arm is released, food is thrown. After throwing, the swing arm comes down to 45 degrees, the bucket sensor operates, and the trigger locks the swing arm.. (Rubber band) Put finger in the hole and push the side cover out.