Nera WorldCommunicator Quick Start

��� ������ ���� ���������� ������� ������������� �������������� ������������������ ���������������� � � � � � � � � � � � � � �� ������������ ������� ���������� �� �������������� �������� ������������ ���������� � ����� � ����� ��������� ������������ ��� � ����� ���������������� ��������������� ��������������� ��� ��������������� ���������� ����������������� ���������� ���� ��� ��� ����� ������������ ����������� ���� ����� ��������� ����� Setting up 1 Open the WorldCommunicator by swinging down the Modem Unit. 2 Unfold the antenna. Use storm locks if necessary. 3 Press and hold 2 secs. for 4 PIN code: use multi- buttons as indicated (default code: 1 2 3 4). 5 Check antenna cable connections. 6 The four satellites are positioned stationary above equator, see map in "Getting Started" or on CD. Aim the antenna towards the estimated position of the satel- lite, or make a slow scan across the hemi- sphere with the vertical angles 60°, 30° or 0° as indicated. If necessary, use the compass. Free line of sight to the satellite is required. Nera WorldCommunicator - Quickstart �� ��� ��� Doc. no. 102194 Rev. 2.0 09.02 7 The shaded signal strength bar appearing in the display increases in length when closing in on the satellite. The signal strength should be at least 535 for 64 kbps communication. 8 Press to accept the Ocean Region satellite. If no spot beam is found from the current satellite, try another Ocean Region.

must be programmed the first time an Ocean Region is entered: • Press to open the MENU. Scroll down to Set Default Net and press . • Press at required provider. When using a SIM card, the Net service provider is preset. ISDN telephone: 9 Connect the ISDN telephone and verify that you have a dial tone. If no MSN number is configured, 4.8 kbps speech quality is automatically chosen. High quality 64 kbps speech service is selected by entering MSN no.30 into the ISDN equipment (see Getting Started.) DECT handset registration: 10 Press on the WorldCommunicator to enter the MENU. Select Device Manager>Add device>DECT>Speech, and enter Owner's password before pressing . Open to register appears in the display. • Press to switch ON the DECT handset. • Press the DECT display key. • Select and confirm. • Select and confirm. • Select the base station. Nera WorldCommunicator - Quickstart CONT’D ���� � ������������������ �������������� ����� � ����� ��������������� � ����������� �������������� ����� � ����� • Enter the WorldCommunicator base station pass word: 1 2 3 4 (the first four digits of the owner password. Use new code when the owner password has been changed.) • Press when REGISTERED appears in the WorldCommunicator display. Making a call: 11 Dial 00, country code and subscriber number . Press to send the number, e.g.: � � � � � � � � � � � � Data setup: Use the Windows dial-up networking to programme the server telephone number. Make sure to use the correct modem driver. Note! Some Net providers offer free e-mail and internet access by dialing 28#. Dialing a mobile ISDN compatible server: Connect the computer to the ISDN/RS-232 or USB port. Use the following modem drivers: • ISDN, use a driver matching your PCMCIA/PCI card. • RS-232, use a 33.600 bps driver in Windows. • USB, on computer use the Nera WorldCommunicator USB modem driver (found on the CD). On a Mac computer, use Metric Ricochet Wireless. Dialing MPDS is only possible via RS-232 and USB. Dial number **94#. See detailed regarding use of applications on the Nera WorldCommunicator CD. ������� �����