FlyTech P07305 Operation & User’s Manual

FCC Notice Federal Communications Commission (FCC) Radio Frequency Interference Statement Thi s devi ce compl i es wi t h part 15 of t he FCC Rul es. Operat i on i s subj ect t o t he f ol l owi ng t wo condi t i ons; ( 1) Thi s devi ce may not cause harmf ul i nt erf erence, and ( 2) t hi s devi ce must accept any i nt erf erence recei ved, i ncl udi ng i nt erf erence t hat may cause undesi red operat i on. COPYRIGHT & TRAKMARK Al l ri ght s reserved. The i nf ormat i on cont ai ned i n t hi s gui de has been val i dat ed and revi ewed f or accuracy. No pat ent l i abi l i t y i s assumed wi t h respect t o t he use of t he i nf ormat i on cont ai ned herei n. Whi l e every precaut i on has been t aken i n t he preparat i on of t hi s gui de, t he Manuf act urer assumes no responsi bi l i t y f or errors or omi ssi ons. No part of t hi s publ i cat i on may be reproduced, st ored i n a ret ri eval syst em, or t ransmi t t ed i n any f orm or by any means, el ect roni c, mechani cal , phot ocopyi ng, recordi ng, or ot herwi se, wi t hout t he pri or wri t t en permi ssi on of Manuf act urer. General Notice: All the company names used herein are for identification purposes only and may be trademarks of their respective companies. NOTICE The cont ent s of t hi s manual are subj ect t o change wi t hout not i ce. St and Al one LCD Pol e Di spl ay Copyri ght of Manuf act ure Part NO. 48200550 ( J anuary 2002 V1. 0)

2. General Speci f i cat i on. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 3. Unpacki ng and checki ng t he part s. . . . . . . . . . . . . . . . . . . . . . . . 3 4. I nt erf ace. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 4. 1 Speci f i cat i ons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 4. 2 I nt erf ace connect or ( On t he bot t om of t he base sect i on) 4 4. 3 Power Suppl y Connect ors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 4. 4 RS232C l i nk t o PC/HOST connect or . . . . . . . . . . . . . . . . . . . . . 5 4. 5 RS232C l i nk t o di spl ay panel . . . . . . . . . . . . . . . . . . . . . . . . . 5 5. Command Li st . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Appendi x A. Charact er code t abl es. . . . . . . . . . . . . . . . . . . . . . . . . . 7 Appendi x B: Cust omer Di spl ay Di mensi on. . . . . . . . . . . . . . . . . . . . . 8

mat ri x al phanumeri c or 15 col umns x 4 l i nes ( or doubl e hi gh i s 2 l i nes ) by Chi nese charact er. 2. ) Bl ue- whi t e col or and no f i l t er are easy t o eyes. 3. ) The di spl ay panel i s adj ust abl e t o provi de t he best vi ew angl e. 4. ) Provi de 2 pol e f or best posi t i on i nst al l at i on. 5. ) Provi de St ri ng mode command set s. 6. ) Provi des an i nt erf ace based on RS- 232C, and RS232C baud rat e f i xed 9600 bps. .

NO I TEM Descri pt i ons 1 Di spl ay met hod Li qui d cryst al di spl ay 2 LCD t ype STN Bl ue mode 3 Backl i ght mode CCFL backl i ght 4 Bri ght ness 100 cd/㎡ 5 Di spl ay col or Bl ue ( back col or) and Whi t e ( charact er col or) 6 Number of charact er 30 col umns x 4 l i nes ( or doubl e hi gh i s 2 l i nes ) al phanumeri c 15 col umns x 4 l i nes ( or doubl e hi gh i s 2 l i nes ) Chi nese charact er 7 Charact er f ont 8 x 16 Dot mat ri x by al phanumeri c 16 x 16 dot - mat ri x by Chi nese charact er Tradi t i onal Chi nese 96 al phanumeri c 13000 Chi nese charact er by Bi g 5 code Si mpl i f i ed Chi nese 96 al phanumeri c 8000 Chi nese charact er by GB code J apanese 96 al phanumeri c 7000 J apanese charact er 8 Charact er t ype Korean 96 al phanumeri c 8000 Korea charact er 9 Charact er si ze 8. 47mm x 4. 24mm( 16x8 dot mat ri x) 8. 47mm x 8. 47mm( 16x16 dot mat ri x) 16. 94mm x 8. 47mm( 32x16 dot mat ri x) 10 Power suppl y 9- 33 VDC 11 Power consumpt i on 3 - 6 W ( St andby : 1 W) 12 MTBF 15000- 20000 hours ( l i f e t i me) 13 Panel di mensi ons 224 ( W) x 93 ( H) x 50( D) mm 14 Support di mensi ons Long support : 22cm Short support : 9cm 15 Base di mensi ons 190( w) x55( h) x96( d) mm 16 Vi ewi ng angl e 0 – 45 degrees 17 Rot at i on angl e Maxi mum 270 degrees 18 Wei ght 1. 25 Kg 19 Operat i ng t emperat ure 0 – 50℃ 20 Operat i ng Humi di t y 30%- 85% 21 St orage Temperat ure - 20 - 55℃ 22 St orage Humi di t y 10%- 85%

Not es: Make sure no part s are mi ssi ng or damaged. 3.Short Support 2.Long Support 1.Display Panel 4.Base Section ** WINPOS SYSTEM ** WD-202 DISPLAY









6.Adapter






































































ADAPTOR
5.RS232C Cable(Link to PC/Host)

Seri al Synchroni zat i on: Asynchronous Handshaki ng: DTR / DSR Si gnal l evel : MARK = - 3 t o –15 V ( l ogi c “1”) SPACE = +3 t o +15 V ( l ogi c “0”) Baud rat es: 9600 bps Pari t y: None Bi t l engt h: 8 bi t s St op bi t s: 1 or more 4.2 Interface connector (On the bottom of the base section) ●I nt erf ace connect or on t he bot t om of Pol e Di spl ay Base ( st andard ) CN2 CN3 CN6 CN2: RS- 232C connect s t o PC/Host CN3: Connect t o di spl ay panel CN6: Power suppl y connect or CN1, CN4, CN5: No used Power Suppl y Connect ors CN6 / Connect or t ype: DC j ack ( 5. 5/2. 1) I nt erf ace connect or on t he bot t om of Pol e Di spl ay Base ( opt i on ) CN5 CN4 CN3 CN2 CN2: Power i nput connect or f rom adapt er CN3: RS- 232C connect t o pri nt er ( reserved ) CN4: Connect t o di spl ay panel CN5: RS- 232C connect t o PC/Host

CN6 / Connect or t ype: DC j ack ( 5. 5/2. 1) 4.4 RS232C link to PC/HOST connector CN2 / Connect or t ype: D- sub 9 pi n f emal e Pi n assi gnment No Si gnal Di rect i on Funct i on descri pt i on 2 RXD From PC/Host t o di spl ay Recei ve dat a 3 TXD - - 4 DSR - - 5 GND - Si gnal ground 6, 8 DTR From di spl ay t o PC/Host - Di spl ay ready Si gnal 4.5 RS232C link to display panel CN3 / Connect or t ype: Phone- j ack 10P/8C Pi n assi gnment No Si gnal Di rect i on Funct i on descri pt i on 1 NC - Not connect 2, 3 V+ - Power i nput ( 9 – 33 Vdc ) 4, 5 GND - Si gnal ground 6 DSR To di spl ay panel PC/Host ready si gnal 7 DTR From di spl ay panel Pri nt er ready si gnal 8 RXD To di spl ay panel Send dat a t o di spl ay 9 TXD From di spl ay panel No use 10 NC - Not connect

COMMAND [ Name] Command name. [ Format ] <>H i ndi cat es hexadeci mal , <> i ndi cat es deci mal , [ ] k i ndi cat es k t i mes repeat t o cont rol code and f requency. [ Range] Gi ves t he al l owabl e range f or set argument and dat a. [ Descri pt i on] Expl ai n command f unct i on. [ Compl ement ] Compl ement part i cul ar. [ Not e] Gi ves i mport ant i nf ormat i on on t he set t i ng and used of pri nt er command, i f necessary. Command Code Name and descri pt i on US <1F>H Cl ear di spl ay ESC q A <1B>H<71>H/<41>H”d1 – d30” 0D Show st ri ng dat a “d1 – d30” t o di spl ay l i ne 1. ESC q B <1B>H<71>H/<42>H”d1 – d30” 0D Show st ri ng dat a “d1 – d30” t o di spl ay l i ne 2. ESC q C <1B>H<71>H/<43>H”d1 – d30” 0D Show st ri ng dat a “d1 – d30” t o di spl ay l i ne 3. ESC q D <1B>H<71>H/<44>H”d1 – d30” 0D Show st ri ng dat a “d1 – d30” t o di spl ay l i ne 4. ESC q E <1B>H<71>H/<45>H”d1 – d30” 0D Show doubl e- hei ght st ri ng dat a “d1 – d30” t o di spl ay l i ne 1 and l i ne 2. ESC q F <1B>H<71>H/<46>H”d1 – d30” 0D Show doubl e- hei ght st ri ng dat a “d1 – d30” t o di spl ay l i ne 3 and l i ne 4. SO <0E>H Set doubl e- wi dt h charact er mode, Thi s code must be i nsi de st ri ng dat a “d1 – d30”. DC4 <14>H Cancel doubl e- wi dt h charact er mode, Thi s code must be i nsi de st ri ng dat a “d1 – d30”.

00 10 20 30 40 50 60 70 80 90 A0 B0 C0 D0 E0 F0 0 NUL DLE SP 0 @ P ` p 1 ! 1 A Q a q 2 “ 2 B R b r 3 # 3 C S c s 4 EOT $ 4 D T d t 5 ENQ % 5 E U e u 6 & 6 F V f v 7 ‘ 7 G W g w 8 ( 8 H X h x 9 HT ) 9 I Y I y A LF * : J Z j z B ESC + ; K [ k { C , < L \ l | D CR GS - = M ] m } E . > N ^ n ~ F US / ? O _ o SP TWO BYTES CODE SYSTEM CHARACTERS AREA

G















501 mm 191 mm 225 mm 93 mm 281 mm