ELWING E1 500 Operation & User’s Manual

Download ELWING E1 500 PDF Manual (14 pages)

Text of the manual

Congratulations! you are now part of the Elwing Family.

Congratulations for your new purchase! We'd like to thank you for the trust you put on us. You feedback on the board and on the way you ride it is important to us and to many. Feel free to share your feedback and videos on your social media using #elwingboards ! Before you start riding, please make sure you read the instructions and wear a helmet. Ride safe and enjoy! Quentin, Gael, Pierre, Antoine. The Elwing Team. P.S: Join the Elwing Board Riders group on Facebook !

At Elwing Boards, we focus on creating high quality products,

respecting the best concepts in the skateboard industry and integrating the latest electric technology. Please read carefully the whole guide before using your new board. Please read the following safety recommendations before using your board: IMPORTANT 2 1. Always wear protective gears including a helmet, knee, elbow and wrist guards. 2. Respect local regulations concerning electric skateboards. Respect cyclists, pedestrians, drivers. You NEVER have priority. If there is no regulation, please avoid using your board in public places. 3. Using an electric skateboard is not recommended for people younger than 14 years old. Never use an electric skateboard under the influence of alcohol or drugs. . 4. 5. Do not use an electric skateboard on a wet surface. Avoid rough surfaces. The best use is on smooth and clean surfaces. 6. The electric brake only helps to slow down. It will NOT completely stop. Control your speed at any time. 7. Check all the screws and bolts before each session. Mistreating your Elwing Boards may cause the loss of the warranty. 8. This electric skateboard is made for cruising, not for skateboard tricks. . 9. Elwing is not liable for any damage or injury caused by unsafe or faulty repairs. Any repairs made to this product by unauthorized service technicians are the responsibility of the owner. . 10. Enjoy riding your Elwing board! E1 500

4. SKATE TOOL

2. CHARGER Side view The sync button The battery the main switch Top view Back view Kids safety slow mode SLIDER ON/OFF button SPEED mode button (FAST/SLOW) Front view Back view 3 Wheels nut key Kingpin nut key Truck nut key Allen wrench 3,1

1. RECHARGE THE ELWING BOARD BATTERY BEFORE ITS FIRST

USE. 2. PUT THE 2 BATTERIES (STANDARD AAA) IN THE REMOTE CONTROL. INSTALLATION 2 batteries Back view 1. SWITCH ON THE BOARD. THE SWITCH LED WILL FLASH ONCE. 2. SWITCH THE REMOTE CONTROL ON. THE LED ON THE REMOTE WILL FLASH BLUE EVERY 3 SECONDES, MEANING THE REMOTE IS ON. SWITCH ON Side view ON OFF

Note: If you need to change to a new remote control,

please synchronize the new one before its first use. 1. THE SYNC BUTTON IS BLINKING BLUE, MEANING THAT THE CONNECTION WITH THE BOARD IS SUCCESSFUL. 2. YOU’RE GOOD TO GO ! Side view When the board is switched on and connected to the remote you can check the battery gauge on the power switch. Full power Medium battery Low battery Side view Side view 5 MODE Note: We recommend to use the SLOW mode for beginners. 1. FAST/SLOW: CHOSE YOUR MODE ON THE LEFT SIDE OF THE REMOTE. 2. KIDS SAFETY SLOW MODE: THERE IS AN EXTRA BUTTON INSIDE THE BATTERY COMPARTMENT TO DISABLE THE SLOW MODE FUNCTION. PULL THE BUTTON TO THE LEFT AND THE SKATEBOARD SETTINGS WILL BE BLOCKED ON SLOW MODE WITH SMOOTH ACCELERATION, SMOOTH BRAKING AND SLOWER MAX SPEED. To the Left To the Right Kids Safety slow Mode Unlock fast Mode Fast Slow Back view

FORWARD / BACKWARD: Push the main button forward

to speed up progressively. Pull it backwards to brake. Once the board has stopped, the reverse can start if you keep pulling the joystick. Note: When you go reverse you can brake by pushing the joystick forward. SYNCHRONIZATION When the remote is synchronized with the board the sync button on the board is blinking blue. blue anymore. This is the process to remote to the If for some reason this button is not blinking anymore this means the remote is not synchronized with the board synchronise the remote (or a new board). 1. PLEASE MAKE SURE THAT THE BOARD AND THE REMOTE ARE SWITCHED OFF. THE REMOTE IS ON «SLOW MODE», AND THE «CHILD SAFETY» IS ON 2. SWITCH THE BOARD ON. USE A PAPERCLIP TO PRESS THE SYNC BUTTON. THEN THE SYNC BUTTON WILL TURN OFF. 3. To the left Slow mode is activated Back view Side view Paperclip 6 REMOTE IS OFF. ACTIVATE THE SLOW MODE WITH THE BUTTON ON THE SIDE. INSIDE THE AAA BATTERY COMPARTEMENT YOU WILL FIND THE KID SAFETY MODE, PRESS IT TO THE LEFT (TURTLE MODE).

This electric skateboard comes with an external

charger.P lug the charger on the skateboard, then shows a red LED is complete. Keep the Elwing Board full Do not leave the not use it, please recharge the battery every 2 battery will not get CHARGE on the wall plug. The charger when charging which turns green when the charging charged as much as possible. Elwing Board unused for over 2 months. Even if you do months to make sure the damage. Note: Do not use any other charger to charge the It could damage the board and produce BATTERY Avoid negative temperatures or above 40°C. Do not let the board without use or charge for over 1 month. Do not disassemble the power drive and electronic components. Do not short circuit. Elwing Board. accidents. 7 FOR 6 SECONDS. THE REMOTE WILL BLINK BLUE 3 TIMES IN A ROW AND THEN THE SYNC BUTTON ON THE BOARD WILL BLINK BLUE WHICH CONFIRMS THAT THE CONNECTION IS NOW SUCCESSFUL.

1. Battery: The Elwing Board is equipped with a

that can be charged and battery 2. Wheels: The warranty does not cover normal WARNING Risk of explosion if the battery is not correctly replaced. Use ONLY batteries that are identical as the original batteries, provided and Lithium-ion battery discharged over 500 times, After which the might lose around 20% of its capacity. 3. Bearings: Damaged bearings can be dangerous or abnormal noise, please replace them with any bearing on the market. damaged, please avoid contact with water and dust. and increase standard skateboard To reduce the risk of getting the bearings 4. Motor: The motor is extremely resistant. If it ever noise, please contact us for 5. Check all the screws and bolts before each [email protected] makes any abnormal maintenance. session. 8 wear and tear