Elcometer 3000 Series Operation & User’s Manual

en-4 6 Testing a Sample - Motorised Clemen Unit en-6 7 Spares & Accessories en-9 8 Care & Maintenance en-9 9 Warranty Statement en-10 10 Technical Specification en-10 11 Legal Notices & Regulatory Information en-11 www.elcometer.com For the avoidance of doubt, please refer to the original English language version. Dimensions: Manual Clemen Unit: 410 x 200 x 155mm (16.1 x 7.9 x 6.1") Motorised Clemen Unit: 460 x 280 x 330mm (18 x 11 x 13") Weight: Manual Clemen U ...

manufacturing defects, excluding contamination and wear. Replacement consumable parts and accessories, including but not limited to, ball and cutting tools, are excluded from the warranty. 9 WARRANTY STATEMENT 10 TECHNICAL SPECIFICATION 10.1 ELCOMETER 3000 MANUAL CLEMEN UNIT Load Range 0 - 2kg (0 - 4.4lb) Sample Size 75 x 150mm (3 x 6") Sample Thickness 0.5 - 3mm (0.02 - 0.12") Dimensions 410 x 200 x 155mm (16.1 x 7.9 x 6.1") Weight 6kg (13.2lb) Can be used in accordance with: AS/NZS 1580.403.1, BS 3900-E2, DIN 53799, ECCA T12, E ...

en-4 6 Testing a Sample - Motorised Clemen Unit en-6 7 Spares & Accessories en-9 8 Care & Maintenance en-9 9 Warranty Statement en-10 10 Technical Specification en-10 11 Legal Notices & Regulatory Information en-11 www.elcometer.com For the avoidance of doubt, please refer to the original English language version. Dimensions: Manual Clemen Unit: 410 x 200 x 155mm (16.1 x 7.9 x 6.1") Motorised Clemen Unit: 460 x 280 x 330mm (18 x 11 x 13") Weight: Manual Clemen U ...

Before a sample can be tested, the height of the tool must be adjusted. 6.1 ADJUSTING THE TOOL HEIGHT 1 Connect the unit to the mains power supply and press the Power On/Off button to switch on the instrument. 2 Place the sample onto the sample platform and fix in position by rotating the clamp handle. 3 Adjust the height of the tool to its upper position to clear the sample. 4 With the tool positioned at either end, press the Start button then immediately press the Power On/Off button. This will stop the load beam near the centre. 5 Insert the metal ...

(2.2lb) weights 3 Load Beam 4 Clamp 5 Voltmeter 6 Start Button 7 Power On/Off Button 8 Sample Platform 9 Tool 1 OVERVIEW (continued) R www.elcometer.com en-3  Elcometer 3000 Clemen Unit  Tungsten Carbide Ball Tool; 1mm (0.04")  Calibration Certificate - if ordered  User Guide Additional items supplied with the Elcometer 3000 Motorised Clemen Unit  1kg Weight (x4)  Mains Leads: UK, EUR & US The Elcometer 3000 Clemen Unit is packed in a plywood and / or heavy duty cardboard and foam package. It is recommended that this packaging is retaine ...

For loads between 1.5 and 5kg (3.3 and 11lb) use the additional 1kg (2.2lb) supplied. Place the required number of weights on the vertical rod on the load beam to obtain the correct load. For example, if a load of 3.5kg (7.7lb) is required, place three of the 1kg (2.2lb) weights on to the vertical rod and slide the weight to the 0.5kg (1.1lb) mark on the scale. The instrument and sample are now ready for the test to be carried out. 6.2 TEST PROCEDURE Keep fingers clear of the mechanism during use. 1 Press the Start button. The tool will ...

Part Description Qty D Hexagonal Wrench; 3mm 1 E M4 x 20 Screw for Load Beam 4 sets F M4 x 25 Screw for Sample Clamp 2 sets G Height Adjustable Wheel 1 A + E G + C B + F Fit the parts in accordance with the recommendations given in the table below. Sample Thickness 5mm Spacers for Load Beam Base (Qty) 12mm Spacer for Sample Clamp Height Gauge for Wheel mm inches 0.5 - 5 0.02 - 0.2 0 Not Required 5mm 5 - 10 0.2 - 0.4 1 Not Required 10mm 10 - 15 0.4 - 0.6 2 Required 15mm 15 - 20 0.6 - 0.8 3 Required 20mm Note: 1) Fit the load beam base and s ...

Each Elcometer 3000 is supplied with a 1mm (0.04") tungsten carbide ball tool as standard. Due to the nature of the test, the ball tool will wear with use. Spare / replacement tools are available to purchase from Elcometer or your local Elcometer supplier. Description Part Number Tungsten Carbide Ball Tool; 1mm (0.04") KT003000P021 7.2 CUTTING TOOL FOR SCRATCH TESTING Available to purchase as an optional accessory, the cutting tool gives a much more aggressive scratch than the standard ball tool supplied with each instrument. When using the cutting tool, follow the same adjustm ...