MOBOTIX MOVE VD-4-IR Quick Install
Text of the manual
Vandal Dome VD-4-IR
This guide is for quick installing and connecting the MOBOTIX MOVE VD-4-IR VandalDome IP Camera. For more
details, please refer to the User’s Manual.
Installation Notices
This camera must be installed by qualified personnel and the installation should conform to all local codes.
• This camera contains replaceable batteries. To prevent
Zero Downtime Power Switching (ZDT)
When users connect DC12V power jack and the RJ-45 port at the same time, the power input comes from the
RJ-45 connector. If the RJ-45 power source fails, the camera will switch power input seamlessly to the DC12V
port until the RJ-45 power source is restored.
Ethernet Cable Connection
Connect one end of the Ethernet cable
Vandal Dome VD-4-IR
EN_06/18
MOBOTIX AG • Kaiserstrasse • D-67722 Langmeil • Tel.: +49 6302 9816-0 • Fax: +49 6302 9816-190 • [email protected] • www.mobotix.com
MOBOTIX, the MX Logo, MxControlCenter, MxEasy, MxPEG and MxActivitySensor are trademarks of MOBOTIX AG registered in the European Union, the U.S.A. and in
other countries • For a compl
