LaMotte 1749 Manual
Text of the manual
Pool Professional's Meter!
Instrument de Mesure Professionnel pour Piscine!
Tracer
TM
Salt/EC/TDS PockeTester
Salinité/EC/TDS
Code 1749
guid
com
WARNING! This set contains chemicals
that may be harmful if misused. Read
cautions on individual containers care-
fully. Not to be used by children except
under adult supervision.
Congratulations on your purchase of the TRACER PockeTester. The
TRACER offers direct reading of salinity, conductivity, and TDS with one
electrode. Careful use and maintenance will provide years of reliable service.
SPECIFICATIONS
Display
2000 count LCD with Bar Graph
Conductivity Ranges
0 to 199.9 µS
200 to 1999 µS
2.00 to 19.99 mS
TDS Ranges
(Variable Ratio)
0 to 99.9 ppm or mg/L
100 to 999 ppm or mg/L
1.00 to 9.99 ppt or g/L
Salinity Ranges
0 to 99.9 ppm
100 to 999 ppm
1.0 to 9.99 ppt
TDS Ratio
0.4 to 1.0, adjustable
Salinity Ratio
0.4 to 0.6 automatic
Conductivity ATC
2.0% per °C
Temperature Range
32.0 to 149.0 °F, 0.0 to 65.0 °C
Temperature Resolution
0.1 up to 99.9, 1>100
Temperature Accuracy
±1.8°F, 1°C (from 32 to 122°F, 0 to 50°C)± 5.4°F,
3°C (from 122 to 194°F, 50 to 90°C)
Conductivity ATC Range
32.0°F to 140°F, (0.0°C to 60.0°C)
Accuracy
Conductivity: ± 2% FS
TDS: ± 2% FS
Salinity: ± 2% FS
Measurement Storage
25 numbered readings
Low Battery Indication
‘BAT’ appears on the display
Power
Four CR 2032 Lithium Ion batteries
Auto Power Off
After 10 minutes of no button presses
Operating Conditions
23 to 122° F, –5 to 50° C
Dimensions
1.6 X 7.4 X 1.6 inches, 40 X 187 X 40 mm
Weight
3.1 oz, 87 g
SAL/EC/TDS TRACER PockeTester Kit
Code 1749
Includes: Salinity Standard, 3,000 ppm
Sample Cup w/cap †
Code 6005-G
† Not sold individually. See below.
PARTS & ACCESSORIES
SAL/EC/TDS Replacement Electrode
Code 1765
Weighted Stand w/Sample Cups (5)
Code 1746
Sample Cups w/caps (24)
Code 1745
Conductivity Standard, 84 µS, 30 mL
Code 6312-G
Conductivity Standard, 1413 µS, 30 mL
Code 6354-G
Salinity Standard, 3,000 ppm, 30 mL
Code 6005-G
*WARNING: Reagents marked with an * are considered to be potential health hazards. To
view or print a Safety Data Sheet (SDS) for these reagents go to www.lamotte.com.
Search for the four digit reagent code number listed on the reagent label, in the contents
list or in the test procedures. Omit any letter that follows or precedes the four digit code
number.
For example, if the code is 4450WT-H, search 4450. To obtain a printed copy, contact
LaMotte by email, phone or fax.
Emergency information for all LaMotte reagents is available from Chem-Tel: (US, 1-800-
255-3924) (International, call collect, 813-248-0585).
Front Panel Description
1.
Battery compartment cap
2.
LCD Display
3.
MODE button - change mode,
hold data, store data
4.
CAL button - calibration, change
temperature units, recall data
5.
ON/OFF button
6.
Electrode Collar
7.
Electrode
(Note: The Electrode cap is not shown)
TRACER Display
1.
Bar graph display
2.
Main display
3.
Temperature display
4.
Measurement units
5.
Range calibration and
low battery indicators
6.
Reading hold indicator
4
3
1
5
6
2
M H
L
0
0
2
10
20
12
5
10
7
BAT
pp tm mµ S mg/L
8.8.8.8
°C
8.8.8 °F
HOLD
