Hama DIT1010BT Operating Instructions Manual

Руководство по эксплуатации/Istruzioni per l‘uso/Gebruiksaanwijzing/Οδηγίες χρήσης/Instrukcja obsługi/ Használati útmutató/Návod k použití/Návod na použitie/Manual de instruções/Kullanma kılavuzu/ Manual de utilizare/Bruksanvisning/Käyttöohje/Работна инструкция/Betjeningsvejledning/Manuelt stasjonssøk Digital Tuner 00054895 (DIT1010BT) Digital-Tuner all-guides com

Display 3.2" (8.12 cm) Colour TFT Encryption WEP, WPA, WPA2, WPS DAB frequencies 174.928 - 239.200 MHz FM frequencies 87.5 - 108 MHz Current input 6 V 500mA switch mode power supply Power consumption Operation max. 3 W Standby Non-network mode < 1W Network mode < 2W Connections Line Out, Optical Out, Update Port Favourites DAB/DAB+: 20 IR: 20 FM: 20 Spotify Connect: 10 Codec IR: MP3, WMA, ADTS, MPEG-DASH DAB: MP2, AAC UI languages English, German, Danish, Dutch, Finnish, French, Italian, Norwegian, Polish, Portuguese, Spanish, Swedish,Turkish Packaging contents DIT1010BT, Telescope Antenna, RCA Cable, Remote Control, Batteries, Quick Start Guide

Go to spotify.com/connect to learn how Spotify Connect

Controls and displays A: Tuner front 1 [MENU/SETTINGS] button Direct access to settings / menu 2 [MODE] button Change operating mode (FM, DAB+, Bluetooth, podcasts, Internet, Spotify Connect) 3 [HOME] button Back to playback screen 4 [BACK] button Back one menu level 5 [PRESET] button Save / access favourites 6 [INFO] button Display additional information 7 Display 8 Infra-red receiver Sensor for remote control 9 [POWER/VOLUME/ENTER/ NAVIGATE] On/Off switch, Volume control, Selection confirmation, Navigation B: Tuner back 10 Mains power supply 11 Line-out socket 12 Optical output 13 Update port 14 Antenna* Note * This tuner has a changeable antenna. You can use an active or passive antenna equipped with a coaxial connection. all-guides com

1 [ ] On/off switch Press ≙ [volume -/+]/ [ ] 2 [ ] Mute 3 [IR] Direct access to Internet radio mode ≙ [mode] 4 [DAB] Direct access to DAB mode ≙ [mode]** 5 [FM] Direct access to FM mode ≙ [mode] 6 [AUX] Direct access to Aux in mode ≙ [mode]** 7 [ ] Backlight settings** 8 [MEDIA] Direct access to MEDIA mode ≙ [mode]** 9 [MODE] Change operating mode (Internet radio,DAB, FM, Spotify Connect, podcasts, Aux in) ≙ [mode] 10 [ ] Equaliser settings 11 [ALARM] Direct access to alarm settings ≙ [alarm] 12 [SLEEP] Snooze settings 13 [SNOOZE] Activating Snooze 14 [MENU] Direct access to the menu ≙ [menu] 15 [I◄◄] Previous track (mode: Spotify Connect, podcasts, BT) 16 [►►I] Next track (mode: Spotify Connect, podcasts, BT) 17 Navigation buttons ▲ Up/▼ Down/◄ Back one menu level ≙ [back]/► Forward / Confirm ≙ Press [enter/navigate]/[OK] 18 [OK] Confirm ≙ Press [enter/ navigate] 19 [◄◄] Rewind (mode: Spotify Connect, podcasts) 20 [►► ] Fast forward (mode: Spotify Connect, podcasts) 21 Volume buttons [+]/[-] Volume control ≙ Turn [volume -/+]/ [ ] 22 Favourites buttons [+]/[-] Selection from favourites list 23 [ ] Start / Stop playback (mode: Spotify Connect, podcasts, BT, Aux in) 24 [ ] Back one menu level ≙ [back] 25 Number buttons Direct access to / save favourites 26 [FAVORITES] List / save favourites 27 [INFO] Display additional information ≙ [info]** 28 CD playback mode** 29 BT playback mode Note Buttons marked with ** have no function on this tuner model. Please note that not every function may be available for the product you have acquired since the range of functions is always determined by the features on your product.

2. Package contents. . . . . . . . . . . . . . . . . . . . . . . . 7 3. Safety instructions. . . . . . . . . . . . . . . . . . . . . . . 7 4. Informations and notes before getting started . 8 5. Getting started . . . . . . . . . . . . . . . . . . . . . . . . . 8 5.1 General notes on use . . . . . . . . . . . . . . . . . . . . . . 9 5.1.1 Switch On/Off / Standby . . . . . . . . . . . . . . . . . 9 5.1.2 Navigation and controls . . . . . . . . . . . . . . . . . 9 5.1.3 Volume adjustment / mute . . . . . . . . . . . . . . . 9 5.2 Connecting and starting up . . . . . . . . . . . . . . . . . 9 5.3 General notes on use . . . . . . . . . . . . . . . . . . . . . . 9 5.4 Initial setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 6. Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 6.1 Connection via Optical-OUT . . . . . . . . . . . . . . . . 11 6.2 Connection via LINE OUT . . . . . . . . . . . . . . . . . . 11 7. Main menu / modes. . . . . . . . . . . . . . . . . . . . . 12 8. Internet radio . . . . . . . . . . . . . . . . . . . . . . . . . 12 8.1 Station search . . . . . . . . . . . . . . . . . . . . . . . . . . 12 8.1.1 Search by country or region . . . . . . . . . . . . . 12 8.1.2 Search by genre . . . . . . . . . . . . . . . . . . . . . . 12 8.1.3 Search by name . . . . . . . . . . . . . . . . . . . . . . 12 8.1.4 Popular stations . . . . . . . . . . . . . . . . . . . . . 12 8.1.5 Local stations . . . . . . . . . . . . . . . . . . . . . . . 13 8.2 Favourites (local) . . . . . . . . . . . . . . . . . . . . . . . . 13 8.2.1 Assigning the favourites shortcut buttons . . . 13 8.2.2 Calling up shortcut button favourites . . . . . . 13 8.2.3 Assigning the list of favourites (1-20) . . . . . . 13 8.2.4 Calling up a station from the Favourites list (1- 20) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 9. Podcasts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 9.1 Podcast search. . . . . . . . . . . . . . . . . . . . . . . . . . 14 9.1.1 Search by country or region . . . . . . . . . . . . . 14 9.1.2 Search by format (subjects or categories) . . . 14 9.1.3 Search by name . . . . . . . . . . . . . . . . . . . . . . 14 9.2 Favourites (local) . . . . . . . . . . . . . . . . . . . . . . . . 14 9.2.1 Assigning the list of favourites (1-20) . . . . . . 15 9.2.2 Calling up a station from the Favourites list (1- 20) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 10. Spotify . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 11. Digital radio (DAB/DAB+) . . . . . . . . . . . . . . . 15 11.1 Search / Automatic search . . . . . . . . . . . . . . . . 15 11.2 Station list . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 11.3 Edit station list . . . . . . . . . . . . . . . . . . . . . . . . . 16 11.4 Favourites (local) . . . . . . . . . . . . . . . . . . . . . . . 16 11.4.1 Assigning the list of favourites (1-20) . . . . . 16 11.4.2 Calling up a station from the Favourites list. 16 11.5 DRC (Dynamic Range Control) . . . . . . . . . . . . . 16 11.6 Station sequence . . . . . . . . . . . . . . . . . . . . . . . 17 12. FM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 12.1 Search setting . . . . . . . . . . . . . . . . . . . . . . . . . 17 12.2 Search / Automatic search . . . . . . . . . . . . . . . . 17 12.3 Manual station search . . . . . . . . . . . . . . . . . . . 18 12.4 Favourites (local) . . . . . . . . . . . . . . . . . . . . . . . 18 12.4.1 Assigning the list of favourites (1-20) . . . . . 18 12.4.2 Calling up a station from the Favourites list. 18 12.5 Audio setting . . . . . . . . . . . . . . . . . . . . . . . . . . 18 13. Bluetooth®. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 13.1 Bluetooth® pairing . . . . . . . . . . . . . . . . . . . . . 19 13.2 Automatic Bluetooth® connection (after successful pairing) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 13.3 Terminating the Bluetooth® connection. . . . . . 19 14. Sleep . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 15. Alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 15.1 Alarm settings . . . . . . . . . . . . . . . . . . . . . . . . . 20 15.2 Activating / deactivating the alarm . . . . . . . . . . 20 15.3 Stopping the alarm/ Snooze function . . . . . . . . 20 16. System settings . . . . . . . . . . . . . . . . . . . . . . . 20 16.1 Equaliser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 16.2 Internet settings. . . . . . . . . . . . . . . . . . . . . . . . 21 16.2.1 Network wizard – Configuration of Internet connection / Search. . . . . . . . . . . . . . . . . . . . . . . . 21 16.2.2 Wireless network connection (WLAN) . . . . . 21 16.2.3 Manual configuration of network connection – wireless (WLAN) . . . . . . . . . . . . . . . . . . . . . . . . . . 22 16.2.4 View settings . . . . . . . . . . . . . . . . . . . . . . . 22 16.2.5 Network profile . . . . . . . . . . . . . . . . . . . . . 23 16.3 Time/ Date settings. . . . . . . . . . . . . . . . . . . . . . 23 16.4 Language. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 16.5 Factory reset. . . . . . . . . . . . . . . . . . . . . . . . . . . 24 16.6 Software update. . . . . . . . . . . . . . . . . . . . . . . . 24 16.7 Info . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 16.8 Setup wizard . . . . . . . . . . . . . . . . . . . . . . . . . . 25 16.9 Lighting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 16.10 Auto standby . . . . . . . . . . . . . . . . . . . . . . . . . 25 17. UNDOK – Everything in the palm of your hand . 25 17.1 First-time setup of the device with UNDOK . . . . 26 17.1.1 Procedure for iOS users. . . . . . . . . . . . . . . . 26 17.1.2 Procedure for Android users . . . . . . . . . . . . 26 Content

19. Warranty Disclaimer . . . . . . . . . . . . . . . . . . . 27 20. Recycling Information . . . . . . . . . . . . . . . . . . 27 21. Declaration of Conformity. . . . . . . . . . . . . . . 27

5 Main menu* Internet Radio Station List Germany History Seach Location Popular Discover System settings** Main menu* Podcasts Podcast List Germany Seach Popular Location Discover System settings** Main menu* Spotify System settings** Main menu* DAB Station List Scan Prune invalid DRC DRC high DRC low DRC off Station order Alphanumeric Ensemble Valid System settings** Main menu* FM Scan setting Audio setting System settings** Main menu* Bluetooth Setup Bluetooth View Details System settings** Main menu* Sleep Alarms Alarm 1 Alarm 2 System settings** Menu structure

Network Network wizard PBC Wlan setup View settings Manual settings NetRemote PIN-Setup Clear network settings Keep network connected Time/Date Set Time/Date Auto update Update from DAB Update from FM Update from network no update Set format Set timezone Daylight savings Language Factory Reset Software update Auto-check setting Check now Setup wizard Info Privacy policy Backlight Color theme Auto-Standby all-guides com

and read the following instructions and information completely. Please keep these instructions in a safe place for future reference. If you sell the device, please pass these operating instructions on to the new owner. 1. Explanation of warning symbols and notes Risk of electric shock This symbol indicates a risk of electric shock from touching product parts carrying hazardous voltage. Warning This symbol is used to indicate safety instructions or to draw your attention to specific hazards and risks. Note This symbol is used to indicate additional information or important notes. 2. Package contents • Digital tuner DIT1010BT • Telescopic antenna • Power supply unit • Stereo Cinch L/R output • Remote control • 2 x AAA batteries • These operating instructions 3. Safety instructions • The product is intended for private, non-commercial use only. • Do not use the product in the immediate vicinity of heaters, other heat sources or in direct sunlight. • Only use the article under moderate climatic conditions. • Use the product only for the intended purpose. • Do not use the product in a damp environment and avoid splashing water. • Be considerate. High volumes can disturb or interfere with your surroundings. • Protect the product from dirt, moisture and overheating and use it in dry rooms only. • As with all electrical products, this device should be kept out of the reach of children. • Children must not play with the device. Cleaning and user maintenance must not be carried out by children without supervision. • Do not use the product in areas in which electronic products are not permitted. • Be considerate. High volumes can disturb or interfere with your surroundings. • Do not drop the product and do not expose it to any major shocks. • Do not operate the product outside the power limits specified in the technical data. • Keep the packaging material out of the reach of children due to the risk of suffocation. • Dispose of packaging material immediately in accordance with the locally applicable regulations. • Do not modify the device in any way. Doing so voids the warranty. Risk of electric shock • Do not open the device or continue to operate it if it becomes damaged. • Do not use the product if the AC adapter, adapter cable or power cable is damaged. • Do not attempt to service or repair the product yourself. Leave any and all service work to qualified experts.

• When inserting batteries, note the correct polarity (+ and - markings) and insert the batteries accordingly. Failure to do so could result in the batteries leaking or exploding. • Only use batteries (or rechargeable batteries) that match the specified type. • Before you insert the batteries, clean the battery contacts and the polar contacts. • Do not allow children to change batteries without supervision. • Do not mix old and new batteries, or batteries of different types or from different manufacturers. • Remove the batteries from products that are not being used for an extended period (unless these are being kept ready for an emergency). • Do not short-circuit batteries. • Do not charge batteries. • Do not burn batteries. • Keep batteries out of the reach of children. • Never open, damage or swallow batteries or allow them to enter the environment. They can contain toxic, environmentally harmful heavy metals. • Remove spent batteries from the product and dispose of them without delay. • Do not store, charge or use the device in extreme temperatures. 4. Informations and notes before getting started Note A detailed description of the UNDOK app and all of its functions can be found in our UNDOK guide at: www.hama.com->00054895 ->Downloads Note • For best reception, ensure that the antenna is fully extended and vertical. • Try various different positions if necessary to get the best reception. Preparing the remote control for use Open the cover on the battery compartment. This can be found on the back of the remote control and can be opened by sliding in the direction indicated. The extent of delivery includes two AAA batteries which must be inserted into the battery compartment for the remote control to work. When inserting the batteries, ensure that they are inserted with the correct polarity. The relevant polarity (+ / -) is marked inside the battery compartment. Network connection/ Preparing the Internet connection You can integrate this tuner into a network. To receive Internet radio, an Internet connection is required on this the network. WLAN connection (wireless network) • Ensure the router is switched on, is functioning correctly and that there is a connection to the Internet. • Activate your router's WLAN function. • To ensure the correct functioning of your WLAN connection, follow your router's operating instructions. • Then proceed as described under point 5, "Getting started". Note Use only original accessories (or accessories approved by Hama) to avoid damage to the product. 5. Getting started Note - optimising reception This product has an antenna connection for external antennas with a coaxial connection. A suitable antenna that allows DAB, DAB+ and FM reception is included in the extent of delivery. Alternatively, you can use an active or passive antenna to improve the reception or to adapt it to your requirements. Please note: • Always pull the antenna out completely. • We recommend you adjust the antenna vertically to ensure optimal reception.

5.1.1 Switch On/Off / Standby • Press [POWER/VOLUME/ENTER/NAVIGATE] (9) to switch on the tuner. • Press and hold [POWER/VOLUME/ENTER/NAVIGATE] (9) for 3 seconds to switch the tuner off (standby). • To completely switch off the device, disconnect it from the power supply. 5.1.2 Navigation and controls • After pressing a shortcut button, navigate through the menu items using. • Select the individual menu items by turning [POWER/ VOLUME/ENTER/NAVIGATE] (9). • Confirm the selection by pressing [POWER/VOLUME/ ENTER/NAVIGATE] (9). 5.1.3 Volume adjustment / mute • Turn the volume up (right) or down (left) by turning [POWER/VOLUME/ENTER/NAVIGATE] (9) accordingly. • Press [ ] on the remote control to mute the tuner. • Press [ ] again on the remote control to reset the volume to the value before it was muted. 5.2 Connecting and starting up Warning • Only operate the product from a socket that has been approved for the device. The socket must be installed close to the product and must be easily accessible. • Disconnect the product from the power supply using the On/Off switch – if this is not available, unplug the power cord from the socket. • If using a multi-socket power strip, make sure that the total power consumption of all connected devices does not exceed the power strip's maximum throughput rating. • If you will not be using the product for a prolonged period, disconnect it from mains power. • Connect the power supply to the mains connection (1) on the back of the tuner. • Connect the network cable to a properly installed and easily accessible network socket. • Wait until the tuner has initialised fully. • Press [POWER/VOLUME/ENTER/NAVIGATE] (9) to switch on the tuner. Note – switching on for the first time • The Setup Wizard starts up automatically when the device is turned on for the first time. • The default used language is English. • You can skip the Wizard and start it up again later in German. Once the product has been connected to mains power, initialisation takes place. The tuner is started. To assist you with the first-time setup of the tuner, a Setup Wizard is provided. 5.3 General notes on use Notes on use • These operating instructions always relate to operation using the controls on the device. Functions that are only usable by app or remote control are explained separately. • For information on the buttons on the remote control and their functions (≙) that correspond to the control buttons on the device, please see the Controls and displays. • [OK] and the navigation button ► on the remote control correspond to pressing [POWER/VOLUME/ ENTER/NAVIGATE] (9). • The navigation button ◄ on the remote control corresponds to [ ] (4) on the front of the tuner. • The navigation buttons ▲/▼ correspond to turning [POWER/VOLUME/ENTER/NAVIGATE] (9) to the left and right on the front of the tuner. • When a selection among menu items is to be made (such as YES or NO), the one currently selected has a light-coloured background fill. • In menus offering a variety of different options (such as Equalizer, Update, and so on), the currently selected option is marked with #.

• Use [POWER/VOLUME/ENTER/NAVIGATE] (9) to select each individual number and/or letter and confirm the selection by pressing [POWER/VOLUME/ENTER/ NAVIGATE] (9). • To make corrections, select [BKSP / <-] and confirm. The last input made is deleted. • To cancel input, select [CANCEL] and confirm. • Once your input is complete, select [OK] and confirm to finish. Additional information Depending on the operating mode and stations available, pressing [ ] (6) displays additional information: • Description Indicates the radio station, the current programme, contents, subjects, etc. • Genre The genre (music style) of the station is shown. • Reliability / signal strength • Bit rate The currently received digital bit rate of the received station is displayed. • Channel information • Current time • Today’s date 5.4 Initial setup When it is first connected to the power supply, a list of available languages for the menu is displayed. Proceed as follows to set your desired language: Desired language, for example German (Deutsch) Setup wizard Once a language has been set, the first-time setup can be carried out via the setup wizard (YES)/ or skipped (NO): YES/JA NO/NEIN Note – Starting up with or without the setup wizard • We recommend using the setup wizard (YES) for quick and easy first-time setup (setting of the time, date, internet connection, etc.). • If you wish to skip setup with the setup wizard anyway, choose NO. All of the settings configured by the setup wizard can be configured or changed individually in the System settings menu. Alternatively, you may restart the setup wizard at any time. • Next, choose YES or NO to define whether or not the setup wizard should start automatically next time the tuner is started up. You are in the main menu.

• Update from DAB/ FM If automatic time and date adjustment is activated, the device receives time and date information from the station over the FM/DAB/ DAB+ radio network. This is the best way to ensure that the clock will run accurately and the alarm will trigger at the correct time, even after power outages. • Update from Internet Choose this option to set the time and date automatically via the Internet connection. Also set the time zone of your current location and, if desired, turn (ON) automatic adjustment between summer time and winter time. • No update The time and date (DD-MM-YYYY) must be set manually; no automatic calibration takes place. Network wizard – Configuration of network connection Note – Reference to a different part of these operating instructions Because this chapter is extensive, please follow the directions in section 16.2.1 Network wizard – Configuration of Internet connection / Search Once the network wizard has finished,the setup wizard is finished as well. The display shows a message to this effect. Confirm completion by pressing [POWER/VOLUME/ ENTER/NAVIGATE] (9), to go to the main menu. 6. Connections Note • Connections that are established by means of an optical signal cable are less affected by electrical or magnetic interference than connections that are established via a 3.5 mm audio cable. 6.1 Connection via Optical-OUT You can connect your loudspeaker to the tuner via the digital audio output, for example, and play its audio signals via the loudspeaker. Note • Switch the tuner off before connecting a device to it. • Before connection, remove the safety caps from both ends of the optical signal cable. • Do not bend or crush the cable. • For playback via the optical audio connection, connect an optical signal cable to the tuner's optical audio output (12) and the loudspeaker's optical audio input. • Press [POWER/VOLUME/ENTER/NAVIGATE] (9) to switch on the tuner. • The tuner's audio signal is now output via the loudspeaker. 6.2 Connection via LINE OUT You can connect your loudspeaker to the tuner via the analogue audio output, for example, and play its audio signals via the loudspeaker. Note • Switch the tuner off before connecting a device to it. • Do not bend or crush the cable. • For playback via the analogue audio connection, connect a 3.5 mm RCA cable to the tuner's analogue audio output (11) and the loudspeaker's analogue audio input. • Press [POWER/VOLUME/ENTER/NAVIGATE] (9) to switch on the tuner. • The tuner's audio signal is now output via the loudspeaker. all-guides com

This devices supports radio reception via the Internet, DAB/ DAB+ and FM. The main menu contains the various operating modes as well as other options that are explained separately in the following chapters: 7. Internet radio 8. Podcasts 9. Spotify Connect 10. DAB / DAB+ 11. FM 12. Bluetooth 14. System settings Select amongst the available operating modes by repeatedly pressing [ ] (2). During playback, the current operating mode appears at the top left-hand edge of the screen. 8. Internet radio Note If necessary, it is possible to switch providers in order to make all features and functions of the product available. From the main menu or after pressing [ ] (2) repeatedly, activate (Internet radio) mode on the tuner. Alternatively, press [IR] on the remote control to switch directly to this operating mode. 8.1 Station search The tuner offers various ways to search for stations. • Use [POWER/VOLUME/ENTER/NAVIGATE] (9) to navigate through the individual search functions and their options. • Once you have found a station you like, confirm by pressing [POWER/VOLUME/ENTER/NAVIGATE] (9). The tuner starts playing the selected station. 8.1.1 Search by country or region To search for a station by continent, country and region, proceed as follows: • Press [ ] (1) to access the Settings menu. • Use [POWER/VOLUME/ENTER/NAVIGATE] (9) to navigate to the "Station list" menu item. • Confirm the selection by pressing [POWER/VOLUME/ ENTER/NAVIGATE] (9). • Use [POWER/VOLUME/ENTER/NAVIGATE] (9) to navigate to the "Countries" menu item. Confirm the selection by pressing [POWER/VOLUME/ENTER/ NAVIGATE] (9). Once you have restricted the results to a certain country or region, select a station from the complete list or from a list sorted by genre. 8.1.2 Search by genre To search for a station of a certain genre or subject focus, proceed as follows: • Press [ ] (1) to access the Settings menu. • Use [POWER/VOLUME/ENTER/NAVIGATE] (9) to navigate to the "Station list" menu item. • Confirm the selection by pressing [POWER/VOLUME/ ENTER/NAVIGATE] (9). • Use [POWER/VOLUME/ENTER/NAVIGATE] (9) to navigate to the "Discover" menu item. Confirm the selection by pressing [POWER/VOLUME/ENTER/ NAVIGATE] (9). Once you have restricted the results to a certain genre, select a station from a list of all stations available, or from a pre-selected list, or from a list sorted by country. 8.1.3 Search by name If you know the name of the desired station, you can search for it directly: • Press [ ] (1) to access the Settings menu. • Use [POWER/VOLUME/ENTER/NAVIGATE] (9) to navigate to the "Station list" menu item. • Confirm the selection by pressing [POWER/VOLUME/ ENTER/NAVIGATE] (9). • Use [POWER/VOLUME/ENTER/NAVIGATE] (9) to navigate to the "Search" menu item. Confirm the selection by pressing [POWER/VOLUME/ENTER/ NAVIGATE] (9). Enter the complete name, or a part thereof, in the input screen and select [OK] to start the search. You receive a list of all available stations whose names contain the search key. 8.1.4 Popular stations You can find a selection of the most popular stations as follows: • Press [ ] (1) to access the Settings menu.

navigate to the "Station list" menu item. • Confirm the selection by pressing [POWER/VOLUME/ ENTER/NAVIGATE] (9). • Use [POWER/VOLUME/ENTER/NAVIGATE] (9) to navigate to the "Popular" menu item and select your preferred station. 8.1.5 Local stations To search for stations from your own country (the country in which the tuner is currently located), proceed as follows: • Press [ ] (1) to access the Settings menu. • Use [POWER/VOLUME/ENTER/NAVIGATE] (9) to navigate to the "Station list" menu item. • Confirm the selection by pressing [POWER/VOLUME/ ENTER/NAVIGATE] (9). • Use [POWER/VOLUME/ENTER/NAVIGATE] (9) to navigate to the "Local " menu item. Confirm the selection by pressing [POWER/VOLUME/ENTER/ NAVIGATE] (9). • Use [POWER/VOLUME/ENTER/NAVIGATE] (9) to navigate to your preferred station. Note Replace the placeholder with the country you are currently located in. You can filter this local list by genre, or select a station from the complete list, or select from a pre-selected list. 8.2 Favourites (local) You can save up to 20 of your favourite stations for quick and direct access. 8.2.1 Assigning the favourites shortcut buttons • Set the station that you would like to save to a favourites memory slot. • Once the station is playing, press and hold the relevant shortcut button for around 3 seconds. • The selection will be confirmed by the display showing "Program (1-4, depending on the shortcut button) saved". • During playback, the favourite memory slot is displayed at the bottom of the screen. Note Favourites cannot be deleted. If all 20 station memory slots are filled and you wish to save a new station, choose one of the occupied slots. The station in this slot will be overwritten with the new station. 8.2.2 Calling up shortcut button favourites To call up a stored station, press the corresponding shortcut button. 8.2.3 Assigning the list of favourites (1-20) • Set the station that you would like to save to a favourites memory slot. • If the station is playing, press and hold [ ] (5) for approx. 3 seconds until the Favourites list opens. • Navigate to the preferred memory slot and confirm your selection by pressing [POWER/VOLUME/ENTER/ NAVIGATE] (9). • The selection will be confirmed by the display showing "Program (1-20, depending on the memory slot) saved". 8.2.4 Calling up a station from the Favourites list (1-20) • Press [ ] (5) to call up the Favourites list. • Use [POWER/VOLUME/ENTER/NAVIGATE] (9) to navigate to the preferred station and confirm your selection by pressing [POWER/VOLUME/ENTER/ NAVIGATE] (9).

example, talk shows, news and much more. Podcasts can be downloaded from the Internet. There are normally approximately 10,000 programs available. Similarly to radio stations, the tuner makes it possible to filter a large number of podcasts, or to search the entire database for a matching result. From the main menu or after pressing [ ] (2) repeatedly, activate Podcasts mode on the tuner: 9.1 Podcast search 9.1.1 Search by country or region To search for a podcast by continent, country and region, proceed as follows: • Press [ ] (1) to access the Settings menu. • Use [POWER/VOLUME/ENTER/NAVIGATE] (9) to navigate to the "Podcasts list" menu item. • Confirm the selection by pressing [POWER/VOLUME/ ENTER/NAVIGATE] (9). • Use [POWER/VOLUME/ENTER/NAVIGATE] (9) to navigate to the "Countries" menu item and select your preferred station. Once you have restricted the results to a certain country or region, select a station from the complete list or from a list sorted by genre. 9.1.2 Search by format (subjects or categories) To search for a podcast by continent, country and region, proceed as follows: • Press [ ] (1) to access the Settings menu. • Use [POWER/VOLUME/ENTER/NAVIGATE] (9) to navigate to the "Podcasts list" menu item. • Confirm the selection by pressing [POWER/VOLUME/ ENTER/NAVIGATE] (9). • Use [POWER/VOLUME/ENTER/NAVIGATE] (9) to navigate to the "Discover" menu item and select your preferred station. 9.1.3 Search by name If you know the name of the desired podcast, you can search for it directly: • Press [ ] (1) to access the Settings menu. • Use [POWER/VOLUME/ENTER/NAVIGATE] (9) to navigate to the "Podcasts list" menu item. • Confirm the selection by pressing [POWER/VOLUME/ ENTER/NAVIGATE] (9). • Use [POWER/VOLUME/ENTER/NAVIGATE] (9) to navigate to the "Search" menu item. Enter the complete podcast name, or a part thereof, in the input screen and select [OK] to start the search. You receive a list of all available podcasts whose names contain the search key. 9.2 Favourites (local) You can save up to 20 of your favourite stations for quick and direct access. Note Favourites cannot be deleted. If all 20 station memory slots are filled and you wish to save a new station, choose one of the occupied slots. The station in this slot will be overwritten with the new station.

• Set the station that you would like to save to a favourites memory slot. • If the station is playing, press and hold [ ] (5) for approx. 3 seconds until the Favourites list opens. • Navigate to the preferred memory slot and confirm your selection by pressing [POWER/VOLUME/ENTER/ NAVIGATE] (9). • The selection will be confirmed by the display showing "Program (1-20, depending on the memory slot) saved". 9.2.2 Calling up a station from the Favourites list (1-20) • Press [ ] (5) to call up the Favourites list. • Use [POWER/VOLUME/ENTER/NAVIGATE] (9) to navigate to the preferred station and confirm your selection by pressing [POWER/VOLUME/ENTER/ NAVIGATE] (9). 10. Spotify Spotify Connect gives you access to millions of songs. You can listen to them on your tuner, on the go using your smartphone, or on your PC or smartphone. Requirements: • You must have the Spotify app installed on your Android or iOS device. • It can be downloaded from the Play Store or the Apple App Store. Once the app is installed, start it and log into your account (or, if you do not have an account, register a new one). • You will require a Spotify account (see www.spotify.de for more information). • The tuner must be on the same network as the Android or iOS device with the Spotify app installed. Use: • In the Spotify app, start playback of a playlist or track as usual. • The usual playback information is displayed, such as the album cover, track, etc. • At the bottom edge of the screen, the Spotify Connect logo is shown next to Available devices. • Choose Available devices to access an overview of all devices available on the network. • Select the tuner. The audio is now played back on the tuner. Once the connection has been established, the Spotify Connect logo and the device designation are displayed in green. After successful initial connection: From the main menu, or after pressing [ ] (2) repeatedly, activate Spotify (Spotify Connect) mode on the tuner: • Press [POWER/VOLUME/ENTER/NAVIGATE] (9) (or [ ] on the remote control) to start playback. • Alternatively, you can also control the tuner - e.g. skip to a different track or adjust the volume - using the remote control, the app, or the Spotify app. 11. Digital radio (DAB/DAB+) The tuner receives all established digital radio frequencies in the range of 174 MHz to 240 MHz (band III, channel 5A to 13F). From the main menu or after pressing [ ] (2) repeatedly, activate DAB (DAB radio) operating mode on the tuner. Alternatively, press [DAB] on the remote control to switch directly to this operating mode. 11.1 Search / Automatic search The automatic DAB channel search scans the DAB band III for available stations. After the station search, all interference-free stations are saved in alphabetical order. In Stations list a ? is displayed in front of the station names of stations found during a previous scan but which cannot currently be received. The automatic DAB station search starts automatically when DAB mode is started for the first time; it is indicated by Scanning… and a status bar on the display. If you would like to start the search again, proceed as follows: • Press [ ] (1) to access the Settings menu. • Use [POWER/VOLUME/ENTER/NAVIGATE] (9) to navigate to the "Full scan" menu item. • Confirm the selection by pressing [POWER/VOLUME/ ENTER/NAVIGATE] (9). • Wait until the search process has completed. • The available stations are now displayed in the list of stations.

You can call up the station list in DAB mode at any time. To do this, proceed as follows: • Press [ ] (4) during playback to navigate through the available stations in ascending alphabetical order using [POWER/VOLUME/ENTER/NAVIGATE] (9). • Confirm the selection by pressing [POWER/VOLUME/ ENTER/NAVIGATE] (9). • The device starts playback automatically. Note The list of stations contains all stations that were found on the last station search. A further station search - as described in 11.1 Search / Automatic search - can be started. A station's reception quality depends on factors such as the weather, location and orientation of the aerial. If a station shown in the list of stations is not available, changing the orientation of the aerial or the location of the radio may help. Stations that are not available can be removed from the list of stations as described in 11.3 Edit station list. 11.3 Edit station list To remove stations that are not currently in the reception area, from your station list, proceed as follows: • Press [ ] (1) to access the Settings menu. • Use [POWER/VOLUME/ENTER/NAVIGATE] (9) to navigate to the "Delete inactive stations" menu item. • Confirm the selection by pressing [POWER/VOLUME/ ENTER/NAVIGATE] (9). If you answer YES, then all currently unavailable stations will be removed from the station list. Note To keep the list of stations up to date, we recommend updating the list regularly with a full station search (see 11.1 Search / Automatic search). 11.4 Favourites (local) You can save up to 20 of your favourite stations for quick and direct access. Note Favourites cannot be deleted. If all 20 station memory slots are filled and you wish to save a new station, choose one of the occupied slots. The station in this slot will be overwritten with the new station. 11.4.1 Assigning the list of favourites (1-20) • Set the station that you would like to save to a favourites memory slot. • If the station is playing, press and hold [ ] (5) for approx. 3 seconds until the Favourites list opens. • Navigate to the preferred memory slot and confirm your selection by pressing [POWER/VOLUME/ENTER/ NAVIGATE] (9). • The selection will be confirmed by the display showing "Program (1-20, depending on the memory slot) saved". 11.4.2 Calling up a station from the Favourites list (1-20) • Press [ ] (5) to call up the Favourites list. • Use [POWER/VOLUME/ENTER/NAVIGATE] (9) to navigate to the preferred station and confirm your selection by pressing [POWER/VOLUME/ENTER/ NAVIGATE] (9). 11.5 DRC (Dynamic Range Control) Some DAB network radio stations support a volume control feature that actively takes effect during playback. If the volume suddenly increases, DRC automatically lowers it. If the volume suddenly becomes quieter, DRC automatically raises it. The same happens when playback is suddenly quiet. The tuner then increases the volume again. DRC high: total equalisation of different volumes. Strong compression can audibly reduce the dynamics of a music title. DRC low: partial equalisation of different volumes. More subtle compression, without too much loss of dynamics. DRC off: no equalisation all-guides com

• Press [ ] (1) to access the Settings menu. • Use [POWER/VOLUME/ENTER/NAVIGATE] (9) to navigate to the "Volume adjustment" menu item. • Confirm the selection by pressing [POWER/VOLUME/ ENTER/NAVIGATE] (9) and select your desired setting. 11.6 Station sequence By default the tuner sorts stations into alphabetical order. You can also sort by signal strength or ensemble. To change the sorting order, proceed as follows: • Press [ ] (1) to access the Settings menu. • Use [POWER/VOLUME/ENTER/NAVIGATE] (9) to navigate to the "Station sequence" menu item. • Choose between "Alphabetic", "Provider" and "Valid" and confirm your selection by pressing [POWER/ VOLUME/ENTER/NAVIGATE] (9). 12. FM From the main menu or after pressing [ ] (2) repeatedly, activate FM (FM radio) operating mode on the tuner. Alternatively, press [FM] on the remote control to switch directly to this operating mode. Stations that broadcast additional information regarding the station and the programme, are highlighted on the display with an RDS icon (Radio Data System). This additional information is displayed by pressing [ ] (6). 12.1 Search setting The search setting allows you to determine whether stations with low signal strength are ignored during the automatic search. Proceed as follows: • Press [ ] (1) to access the Settings menu. • Use [POWER/VOLUME/ENTER/NAVIGATE] (9) to navigate to the "Search settings" menu item. • Confirm the selection by pressing [POWER/VOLUME/ ENTER/NAVIGATE] (9). • To have the search run stop only at stations with high signal strength, select Strong stations only. Otherwise, the search run will stop at every station for which a signal is received. Note By default, the "Strong stations only" method is selected. 12.2 Search / Automatic search • Press [POWER/VOLUME/ENTER/NAVIGATE] (9) to start a station search. • The tuner stops the search and starts playback when it finds a station. • Pressing [POWER/VOLUME/ENTER/NAVIGATE] (9) again continues the search process until the next station is found.

When you make station settings manually, you can define the desired frequency yourself and tune into stations that were ignored during automatic station search because their signals were too weak. • Press [ ] (4) to switch to the manual station settings. • Turn [POWER/VOLUME/ENTER/NAVIGATE] (9) (left: - 0.05 MHz / right: + 0.05 MHz) until the desired frequency is displayed. Wait a moment until playback of the received station signal begins. • Press [ ] (4) again to exit the manual station settings. 12.4 Favourites (local) You can save up to 20 of your favourite stations for quick and direct access. Note Favourites cannot be deleted. If all 20 station memory slots are filled and you wish to save a new station, choose one of the occupied slots. The station in this slot will be overwritten with the new station. 12.4.1 Assigning the list of favourites (1-20) • Set the station that you would like to save to a favourites memory slot. • If the station is playing, press and hold [ ] (5) for approx. 3 seconds until the Favourites list opens. • Navigate to the preferred memory slot and confirm your selection by pressing [POWER/VOLUME/ENTER/ NAVIGATE] (9). • The selection will be confirmed by the display showing "Program (1-20, depending on the memory slot) saved". 12.4.2 Calling up a station from the Favourites list (1-20) • Press [ ] (5) to call up the Favourites list. • Use [POWER/VOLUME/ENTER/NAVIGATE] (9) to navigate to the preferred station and confirm your selection by pressing [POWER/VOLUME/ENTER/ NAVIGATE] (9). 12.5 Audio setting For some stations with a weak signal, quality can be slightly improved by playing them in mono quality. You can enable this function in the menu, and the tuner will automatically switch to mono reception when signal quality is poor. To change the audio setting, proceed as follows: • Press [ ] (1) to access the Settings menu. • Use [POWER/VOLUME/ENTER/NAVIGATE] (9) to navigate to the "Audio setting" menu item. • Confirm the selection by pressing [POWER/VOLUME/ ENTER/NAVIGATE] (9) and select your desired setting. 13. Bluetooth® You can pair your devices with the tuner using Bluetooth and use them as a playback device. You can control playback directly on the terminal device. You can adjust the volume on the tuner, as well. Note – Bluetooth ® • Check whether your mobile device (smartphone, tablet PC. etc.) is Bluetooth-capable. • Note that the maximum range for Bluetooth® is 10 metres without obstacles such as walls, people, etc. • The connection may be disrupted by other Bluetooth® devices/connections in the vicinity. • The tuner can only ever be paired with one device at a time. • Note that compatibility depends on the supported Bluetooth® profiles as well as the Bluetooth® versions being used. (See: Technical data in the operating instructions for the respective device)

mode on the tuner: [ ] Alternatively, press [BT] on the remote control to switch directly to this operating mode. 13.1 Bluetooth® pairing • Make sure that your Bluetooth® capable terminal device is switched on and that Bluetooth® is activated. • Press [ ] (1) to access the Settings menu. • Use [POWER/VOLUME/ENTER/NAVIGATE] (9) to navigate to the "Setup Bluetooth" menu item. • Open the Bluetooth® settings on your device and wait until the list of found Bluetooth® devices shows DIT1010SBT. • If necessary, start searching for Bluetooth® devices on your device. • Select DIT1010SBT and wait until the tuner is shown as connected in the Bluetooth® settings of your device. • Your device is also shown as connected on the tuner display. • Start and control audio playback using the controls on your device. Note - Bluetooth ® password Some devices require a password in order to connect to another Bluetooth® device. • If your device requests a password to connect to the loudspeaker, enter 0000. 13.2 Automatic Bluetooth® connection (after successful pairing) • Devices that have already been paired with the tuner are stored automatically on the tuner. Note - connection impaired After the tuner and device have been paired, a connection is established automatically. If the Bluetooth® connection is not established automatically, check the following: • In your device's Bluetooth® settings, check that DIT1010SBT is connected. If not, repeat the steps listed under Bluetooth® pairing. • Check that your device and the tuner are less than 10 metres apart. If not, move them closer together. • Check whether obstacles are impairing the range. If so, move the devices closer together. 13.3 Terminating the Bluetooth® connection [ ] Main menu  Terminate connection • Then turn [POWER/VOLUME/ENTER/NAVIGATE] (9) to select the YES button and confirm the termination of the Bluetooth connection by pressing [POWER/VOLUME/ ENTER/NAVIGATE] (9).

to standby mode after a pre-defined length of time, regardless of its operating mode. • Press [ ] (1) to access the Settings menu. • Use [POWER/VOLUME/ENTER/NAVIGATE] (9) to navigate to the "Main menu" menu item. • Confirm the selection by pressing [POWER/VOLUME/ ENTER/NAVIGATE] (9). • Use [POWER/VOLUME/ENTER/NAVIGATE] (9) to navigate to the "Sleep" menu item. • Use [POWER/VOLUME/ENTER/NAVIGATE] (9) to set the timer value. • Confirm your setting by pressing [POWER/VOLUME/ ENTER/NAVIGATE] (9). • If the sleep timer is activated, this is indicated in the playback screen by [ ]. 15. Alarm The tuner has two individually adjustable alarm times. 15.1 Alarm settings You can access the alarm settings as follows: • Press [ ] (1) to access the Settings menu. • Use [POWER/VOLUME/ENTER/NAVIGATE] (9) to navigate to the "Main menu" menu item. • Confirm the selection by pressing [POWER/VOLUME/ ENTER/NAVIGATE] (9). • Use [POWER/VOLUME/ENTER/NAVIGATE] (9) to navigate to the "Alarm" menu item. Alarm 1 and alarm 2 are configured identically and allow two separate alarm times to be saved. Select Alarm 1 or 2 and confirm your selection by pressing [POWER/VOLUME/ ENTER/NAVIGATE] (9). Set the following details using [POWER/VOLUME/ENTER/ NAVIGATE] (9). Mode: Choose when the alarm is to activate: Off – Daily – Once – Weekdays – Weekends Time: First choose the hour, then the minute at which the alarm is to activate. Mode: Set whether you wish to be woken by an alarm tone (buzzer), by DAB, FM or by the Internet radio. Programme: If you selected Internet radio/ DAB/ FM, choose which station you wish to be woken with. You can choose any of the 20 favourite slots or the Last listened. Volume: You can set the volume at which the alarm sound should be played. This setting makes it irrelevant how loud you last listened to the tuner. Saving: Select Off / On to complete your alarm settings. Note It is recommended to allow the device to update the time automatically. This ensures that the time is always correct even if there is a separation of power supply – for example a power cut. 15.2 Activating / deactivating the alarm • Confirm the menu item Save in alarm settings to activate the alarm. • Disable the alarm by setting the Mode to Off. 15.3 Stopping the alarm/ Snooze function • If the alarm is triggered, press and hold [POWER/ VOLUME/ENTER/NAVIGATE] (9) for approx. 3 seconds to stop the alarm. • If the alarm is triggered, press[POWER/VOLUME/ ENTER/NAVIGATE] (9) to enable snooze. • The alarm turns off for the selected time interval (5/10 minutes) before activating once again. 16. System settings You can modify all settings and access important information about the tuner in the System settings. 16.1 Equaliser The equaliser allows you to adjust the sound of the tuner to suit your preferences by amplifying or reducing the amount of bass or treble in the audio. You can choose from preconfigured profiles, adjusted to suit a variety of music genres, or create your own custom profile.

[ ] System settings  Equaliser • Use [POWER/VOLUME/ENTER/NAVIGATE] (9) to select one of the pre-configured profiles. • To create your own equaliser profile, choose the My EQ settingoption. • This takes you to the bass, treble and loudness settings (volume amplification). • To change a value, press [POWER/VOLUME/ENTER/ NAVIGATE] (9) on the relevant selection and change the values by turning [POWER/VOLUME/ENTER/ NAVIGATE] (9) left or right. If playback is already started when you modify these settings, you can hear the changes in the audio immediately. • Confirm the selection by pressing [POWER/VOLUME/ ENTER/NAVIGATE] (9) again. • Once you have made all the settings, press [ ] (4) on the tuner and confirm that the settings are to be saved by pressing [POWER/VOLUME/ENTER/NAVIGATE] (9). • To use the new profile, choose the My EQ option. 16.2 Internet settings 16.2.1 Network wizard – Configuration of Internet connection / Search The network wizard helps you set up a connection between the tuner and the Internet. More methods of configuration and detailed information are amplified subsequently. • You can start the Network wizard as follows: • Press [ ] (1) to go to the system settings. • Use [POWER/VOLUME/ENTER/NAVIGATE] (9) to navigate to the "Internet settings" menu item. • Confirm the selection by pressing [POWER/VOLUME/ ENTER/NAVIGATE] (9). • Use [POWER/VOLUME/ENTER/NAVIGATE] (9) to navigate to the "Network wizard" menu item. • When the wizard is started, the tuner searches for WLAN (WiFi) connections and then shows a list of the available networks. • Turn [POWER/VOLUME/ENTER/NAVIGATE] (9) to switch between the networks found. At the bottom of the list are options to restart the search ("[Rescan]") or configure the connection yourself ("[Manual config]"). • If your network is not found or the SSID (Service Set Identification, that is, the name of your network) is not shown, the network may be hidden or out of range. In this case, try manual configuration. 16.2.2 Wireless network connection (WLAN) Depending on the network, there are a number of ways to connect to it. Networks that support connection via WPS (Wi-Fi Protected Setup) are identified in the list with the prefix "[WPS...]". Other connections are either open networks or connections protected with a PSK, or Pre-Shared-Key. WPS / PSK / open network connection WPS allows simple and nevertheless protected connection of the tuner to the network. Two options are available for this purpose: The connection can be set up by means of PBC, or Push- Button Configuration, or by the PIN procedure, in which the web interface of your router prompts you to enter a randomly generated sequence of numbers. PBC setup • Select your desired network. (Indicated by the prefix "[WPS...]") • In the WPS menu, then select the "Push Button" option and confirm the selection by pressing [POWER/ VOLUME/ENTER/NAVIGATE] (9). • Press the WPS button on your router or current access point. This can often be done using the web interface, as well. • Consult the operating instructions of your router or access point for details. • Once the procedure has also been initiated on the router / AP, the tuner should connect with the access and the network connection should be available. • Alternatively, PBC setup can be initiated from the tuner's Internet settings: • Press [ ] (1) to go to the system settings. • Use [POWER/VOLUME/ENTER/NAVIGATE] (9) to navigate to the "Internet settings" menu item. • Confirm the selection by pressing [POWER/VOLUME/ ENTER/NAVIGATE] (9). • Use [POWER/VOLUME/ENTER/NAVIGATE] (9) to navigate to the "PBC Wlan setup" menu item. all-guides com

"[WPS...]") • In the WPS menu, choose the PIN option and confirm your selection by pressing [POWER/VOLUME/ENTER/ NAVIGATE] (9). • The tuner generates an 8-digit code, which must be entered into the web or user interface of your router or access point. • Consult the corresponding handbook for details on configuring the router or access point. Skip WPS / Pre-Shared Key (PSK) configuration • Choose the item "[Skip WPS]" to proceed to key entry. • On networks that do not support WPS, you will go directly to key entry. • In the input screen, enter the whole key and then confirm with the OK button. • If the key was entered correctly, the tuner connects to the access point and establishes the Internet/network connection. Note • Often the Pre-Shared Key is printed on the back of the router or access point. • When entering the key, take notice of capitalisation. Open network / unsecured network Note • We recommend against establishing unsecured connections and advise you to always protect your network against unauthorised access. • If you plan to use an open network, you just have to select the network from the list of available networks and confirm. The tuner then connects immediately with the access point. 16.2.3 Manual configuration of network connection – wireless (WLAN) • To manually configure a network connection, proceed as follows: • Press [ ] (1) to go to the system settings. • Use [POWER/VOLUME/ENTER/NAVIGATE] (9) to navigate to the "Internet settings" menu item. • Confirm the selection by pressing [POWER/VOLUME/ ENTER/NAVIGATE] (9). • Use [POWER/VOLUME/ENTER/NAVIGATE] (9) to navigate to the "Manual settings" menu item. Manual configuration wireless (WLAN) – DHCP enable • Select the option "Wireless". • Selection the option "DHCP enable". • In the input screen, enter the whole SSID (network name) and then confirm with the OK button. • Now choose the security standard used by the network. This can be found in the configuration options of your router or access point. • Depending on the encryption used, you may need to enter the network key before the connection is established. Manual configuration wireless (WLAN) – DHCP disable This method corresponds to configuration with an active DHCP server (manual configuration wireless (WLAN) - DHCP enabled), however you must also enter the network information such as the IP address, subnet mask, gateway address and DNS (primary and secondary). Find this information in the web interface of your router or access point, or if this information is already correctly entered, you can confirm the entry. The tuner now attempts to establish the connection. 16.2.4 View settings This is where you will find all of the key information about all network connections that the tuner is currently using, or which have been set up, e.g.: MAC address, WLAN region, DHCP enable / disable, SSID, IP address, subnet mask, gateway address, DNS (primary/secondary), etc.

] (1) to go to the system settings. • Use [POWER/VOLUME/ENTER/NAVIGATE] (9) to navigate to the "Internet settings" menu item. • Confirm the selection by pressing [POWER/VOLUME/ ENTER/NAVIGATE] (9). • Use [POWER/VOLUME/ENTER/NAVIGATE] (9) to navigate to the "Show settings" menu item. 16.2.5 Network profile The tuner automatically saves all successful network connections (profiles). This means that re-establishing these connections (for example, after the tuner was disconnected from the power supply) does not require you to re-enter the network access information. To remove network profiles individually, proceed as follows: • Press [ ] (1) to go to the system settings. • Use [POWER/VOLUME/ENTER/NAVIGATE] (9) to navigate to the "Internet settings" menu item. • Confirm the selection by pressing [POWER/VOLUME/ ENTER/NAVIGATE] (9). • Use [POWER/VOLUME/ENTER/NAVIGATE] (9) to navigate to the "Remove network profiles" menu item. • Select the relevant network profile and press [POWER/ VOLUME/ENTER/NAVIGATE] (9) to remove it. • Confirm the prompt querying if you want to delete the network profile with YES. • A profile that is currently active, or that is in use, cannot be deleted. Note • Before giving or selling the tuner to someone else, we recommend performing a factory reset. • This will completely and permanently delete all network information and connections stored on the device. 16.3 Time/ Date settings To access the time settings, proceed as follows: • Press [ ] (1) to go to the system settings. • Use [POWER/VOLUME/ENTER/NAVIGATE] (9) to navigate to the "Time and date" menu item. • Confirm the selection by pressing [POWER/VOLUME/ ENTER/NAVIGATE] (9). • Use [POWER/VOLUME/ENTER/NAVIGATE] (9) to navigate to the "Update settings" menu item. Auto update Update from Internet Choose this option to set the time and date automatically from the internet. Set the timezone of your current location (Set timezone) and, if desired, turn on automatic adjustment between summer time and winter time (Daylight savings -> ON). Update from DAB / FM If automatic time and date adjustment is activated, the device receives time and date information from the station over the FM/DAB/DAB+ radio network. This is the best way to ensure that the clock will run accurately and the alarm will trigger at the correct time, even after power outages. No update The time and date (DD-MM-YYYY) must be set manually; no automatic calibration takes place. Time/ Date settings Set the date (DD-MM-YYYY) and time (hh:mm) manually using [POWER/VOLUME/ENTER/NAVIGATE] (9). Format Choose between 12 and 24 hours format.

English. To change tuner's menu language, proceed as follows: • Press [ ] (1) to access the Settings menu. • Use [POWER/VOLUME/ENTER/NAVIGATE] (9) to navigate to the "Settings" menu item. • Confirm the selection by pressing [POWER/VOLUME/ ENTER/NAVIGATE] (9). • Use [POWER/VOLUME/ENTER/NAVIGATE] (9) to navigate to the "Language" menu item. Confirm the selection by pressing [POWER/VOLUME/ENTER/NAVIGATE] (9). • Use [POWER/VOLUME/ENTER/NAVIGATE] (9) to select your preferred system language. • The language setting currently selected is marked with an asterisk (*). Note • The following languages are available: English, German, Danish, Dutch, Finnish, French, Italian, Norwegian, Polish, Portuguese, Spanish, Swedish, Turkish 16.5 Factory reset To reset the tuner to the factory default settings (delivery condition), proceed as follows: • Press [ ] (1) to go to the system settings. • Use [POWER/VOLUME/ENTER/NAVIGATE] (9) to navigate to the "Factory settings" menu item. • Confirm the following prompt with YES to reset the tuner to the factory default settings. All settings made previously are deleted. • To abort the deletion process, press [ ] (4) or select NO. Note Resetting to the factory default settings can remedy some problems and malfunctions. • However, all settings made previously, such as equaliser and favourites, permanently deleted. 16.6 Software update Improvements and new features are always constantly being developed for the software used in our tuners to resolve potential errors, increase the range of functions, and so on. We recommend that you always install any available updates on your tuner. Proceed as follows: • Press [ ] (1) to go to the system settings. • Use [POWER/VOLUME/ENTER/NAVIGATE] (9) to navigate to the "Software update" menu item. • If you select Automatic updates (YES), the tuner will automatically check for new software updates on a regular basis. (Recommendation) • Choose Check now to manually start a check for software updates. Warning • Make sure that the device has a stable power supply before you start a software update. • Power supply failure during a software update can cause irreparable damage to the tuner. Update port The update port allows you to load software updates manually. The procedure for automatically updating the software can be found under 16.6 Software update. Note • Available updates and instructions on how to install them can be found at: www.hama.com -> 00054895 16.7 Info To check the current software version, radio ID and device designation of your tuner, proceed as follows: • Press [ ] (1) to go to the system settings. • Use [POWER/VOLUME/ENTER/NAVIGATE] (9) to navigate to the "Info" menu item. • Confirm the selection by pressing [POWER/VOLUME/ ENTER/NAVIGATE] (9).

please let the agent know the current software version. Problems are frequently resolved through software updates, and your query may be resolved by comparing your software version with the last software version available. If updates are available, these can be found at www. hama.com with the corresponding article number or designation of the tuner. You may find update instructions in the article's download area. 16.8 Setup wizard You can restart the setup wizard (see Setup wizard) at any time as follows: [ ] System settings  Setup wizard 16.9 Lighting The backlight can be configured for each operating mode (Operation Mode, Standby Mode) separately. Proceed as follows: • Press [ ] (1) to go to the system settings. • Use [POWER/VOLUME/ENTER/NAVIGATE] (9) to navigate to the "Lighting" menu item. • Confirm the selection by pressing [POWER/VOLUME/ ENTER/NAVIGATE] (9). • Use [POWER/VOLUME/ENTER/NAVIGATE] (9) to adjust the brightness. Note The choice of lighting mode impacts on the power consumption. 16.10 Auto standby Note • For reasons of environmental protection and to save valuable raw materials, the tuner automatically switches to standby mode after 15 minutes, as soon as the playback has been switched to a very low volume or if the tuner has been muted. To enable or disable this function, proceed as follows: [ ] System settings  Auto standby 17. UNDOK – Everything in the palm of your hand The UNDOK app, developed by Frontier Silicon, gives you full control of radios and speakers from your smartphone. Whether you are setting up the device for the first time, specifying settings for the equaliser or managing your favourite stations – UNDOK lets you access all the features from your smartphone or tablet, thereby offering you greater convenience.

The first time you switch on an UNDOK-enabled product from Hama, or when you have set it to the factory settings, it creates a micro access point – a separate Wi-Fi network that you can connect to with your tablet or smartphone. 17.1.1 Procedure for iOS users • Open the UNDOK app on your iPhone or iPad • Tap the Set up audio system menu item • Make sure that the tuner or speaker is in SETUP mode. Set the product to the factory settings, if necessary. Confirm the query with Next • The UNDOK app now prompts you to connect to the product’s Wi-Fi network using the iPhone/iPad settings – to do so, switch to the system settings on your iPhone and select the Wi-Fi network (for example, Setup Hama DIT1010BT). Then return to UNDOK and tap Next • Now choose a name for the tuner (for example, Office DIT1010BT) and confirm your entry with Next • This takes you to the date and time settings – here you set the time format, time source and time zone. • The various network configuration options are then offered to you (where applicable, Wi-Fi, WPS). Tap the desired method; UNDOK switches to the next window • Depending on the selected method, you can now select and configure the desired WiFi network, or set up a WPS connection. • The tuner finally connects to the network and you can use the device in UNDOK by pressing Use my audio system 17.1.2 Procedure for Android users • Open the UNDOK app on your tablet or smartphone • Tap the Set up audio system menu item • Make sure that the tuner or speaker is in SETUP mode. Set the product to the factory settings, if necessary. Confirm the query with Next • On the following page, you will find a list of all available Wi-Fi networks as well as the suggested audio systems; the Hama product (for example, Setup Hama DIT1010BT) should be listed here. Tap the corresponding Wi-Fi network. • Now choose a name for the tuner (for example, Office DIT1010BT) and confirm your entry with Next • This takes you to the date and time settings – here you set the time format, time source and time zone. • The various network configuration options are then offered to you (where applicable, Wi-Fi, WPS). Tap the desired method; UNDOK switches to the next window • Depending on the selected method, you can now select and configure the desired WiFi network, or set up a WPS connection. • The tuner finally connects to the network and you can use the device in UNDOK by pressing "Use my audio system" all-guides com

• Only clean this product with a slightly damp, lint-free cloth and do not use aggressive cleaning agents. • If you do not plan to use the product for a prolonged period, turn off the device and disconnect it from the power supply. Store it in a clean, dry place away from direct sunlight. 19. Warranty Disclaimer Hama GmbH & Co KG assumes no liability and provides no warranty for damage resulting from improper installation/ mounting, improper use of the product or from failure to observe the operating instructions and/or safety notes. 20. Recycling Information Note on environmental protection: After the implementation of the European Directives 2012/19/EU and 2006/66/EU in the national legal system, the following applies: electrical and electronic devices as well as batteries must not be disposed of with household waste. Consumers are obliged by law to return electrical and electronic devices as well as batteries to the designated public collection points or to the point of sale at the end of their service lives. Detailed information on this topic is defined in the national laws of the respective country. This symbol on the product, the operating instructions or the package indicates that a product is subject to these regulations. By recycling, reusing the materials or other forms of utilising old devices/batteries, you are making an important contribution to protecting our environment. 21. Declaration of Conformity Hama GmbH & Co KG hereby declares that the radio equipment type [00054895] is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.hama. com->00054895->Downloads. Frequency band(s) Maximum radio-frequency power transmitted Bluetooth: 2,400 – 2,480 GHz 6.5 dBm (EIRP) WiFi: 2,400 – 2.4835 GHz 15.5 dBm (EIRP) WiFi: 5,150 – 5,350 GHz 16.5 dBm (EIRP) WiFi: 5,470 – 5,725 GHz 16.5 dBm (EIRP) WiFi: 5,725 – 5,850 GHz 11.5 dBm (EIRP) Limitations or requirements in Belgium, Bulgaria, Czech Republic, Denmark, Germany, Estonia, Ireland, Greece, Spain, France, Croatia, Italy, Cyprus, Latvia, Lithuania, Luxembourg, Hungary, Malta, the Netherlands, Austria, Poland, Portugal, Romania, Slovenia, Slovakia, Finland, Sweden, United Kingdom Note If channels 36–64 (frequency 5150–5350 GHz) are used in a 5-GHz WLAN, the product may only be used in closed rooms.