NTI SPLITMUX Series Installation And Operation Manual

onto one HDTV. It supports Quad/POP/full screen with 6 modes and a special feature built-in auto-switching function between 4 different sources. It is easy to operate with great features for viewing or monitoring multiple videos on one screen at the same time from video devices such as computer, Blu-ray player, cable box, DVR, surveillance camera, etc. Perfect to use in surveillance, advertising, education, industry and commercial applications, private Home Theatres etc. Features:  Multiplexes 4 HDMI inputs into 1 HDMI output.  Supports resolutions up to 1080p 60Hz.  Supports scaler up to 1080p functions and digital audio format LPCM 2.0.  Control option: IR remote control, front panel buttons.  Supports Quad, multi-view and seamless switching.  Supports auto switching between 4 sources.  HDM 1.3a, HDCP 1.2 ,DVI 1.0 complaint.  Supports different display modes: Quad, picture on picture (POP) and full screen.  Perfect for controlling remote machines and security monitoring systems, digital signage applications.

Button Function Select Video 1 Select Video 2 Select Video 3 Select Video 4 Quad Picture Display Quad Picture Display (one big window with three small windows), press this button again to change 4 video sequence. Select 3 Video Display (Only select input video 1,2,3) Select 2 Video Display, press this button again to select video input 1,2 or 3,4. Select 4 Video Display Auto Switching Audio Selection Scene Selection

Press button 1 – 4: the video output will be a single full screen, and the button light goes ON to indicate the source of video input. Multi-view Switch Function： Press button 5 – 9: the video output will be a multi-view window; the button light goes ON to indicate the Multiview mode. SWITCHER Function： SWITCHER has video auto switching function, you could select two or four videos to automatically display, with the switching time duration set as indicated below: Press SWITCHER button: (the button light goes ON) then press button 1 – 4 to select the video for auto switching. Press button 5 – 9 to select the auto switching timing : 5 : 5 seconds 6 : 10 seconds 7 : 20 seconds 8 : 30 seconds 9 : 60 seconds Press the SWITCHER button again to leave switching mode. AUDIO Function： When in Multiview display mode, only one audio input can be selected: Press AUDIO button (the button light goes ON), then press button 1 – 4 to select the audio source. Press the AUDIO button again to leave audio selection mode. SCENE Function： The SCENE button for the scene function. There are 9 sets of saved scene modes for easy save and load. SCENE Saved method: Press SCENE button for 3 seconds until button light flash, then press button 1- 9 to save. Press SCENE button again to exit.

Press the SCENE button (the button light goes ON), then press button 1 - 9 for load and exit. Demo Function： Demo mode: 5 - 9 as multi-view window will be auto-switching by sequence. Set as indicated below: Press the SCENE button (the button light goes ON), press the SWITCHER button to turn on the DEMO mode. Press the SCENE button again to leave DEMO mode. Output Resolution: Press button 1 and power ON, output resolution is 720p@60Hz. Press button 2 and power ON, output resolution is 1080p@60Hz. IR Remote Control Function: This device could use IR remote control for function setting and control. The ID number must be setup before using the IR remote control or changing the batteries. Setup the IR remote ID number: Press and hold“Power" button on the IR remote control and press number "0". Button Function 1 same as panel button 1 2 same as panel button 2 3 same as panel button 3 4 same as panel button 4 5 same as panel button 5 6 same as panel button 6 7 same as panel button 7 8 same as panel button 8 9 same as panel button 9 0 same as panel SWITCHER A same as panel AUDIO B same as panel SCENE ＊ SCENE save setting: B → ＊ → 1 ~ 9 、▲ 、▼ 、◀ 、▶ 、＃、MENU、ENTER: Reserved

Connect the RS232 CONSOLE port to the COM port of the host by an RS232 straight cable (pin 2 to pin 2; pin 3 to pin 3, pin 5 to pin 5) Communication format is 115200, 8, N, 1 (115200 bps, 8 data bits, none parity check, 1 stop bit) Command Mode Instruction: [COMMAND] [DESCRIPTION] -------------------------------------------------------------------------------------------------------------- MODE m Select Mode. SWITCHER Enable/Disable Switcher Mode. SWITCHER c Add/Delete "Video Source" for Switcher Mode TIME t Switcher Time. AUDIO Enable/Disable Audio Mode. AUDIO a Select Audio. IR i IR Remote ID setting SAVE n Save Scene. LOAD n Load Scene setting. DEFAULT Reset to Default.

STATUS Display setting. VERSION Display firmware version. ? Show all commands. [SYMBOL] [PARAMETER] -------------------------------------------------------------------------------------------------------------- a 1 | 2 | 3 | 4 c 1 | 2 | 3 | 4 n 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 m 1 | 2 | 3 | 4 | 5 | 6 | 61 | 62 | 63 | 64 | 7 | 8 | 9 i 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 t 5 | 6 | 7 | 8 | 9 (5s | 10s | 20s | 30s | 60s) Space characters between the command and parameters can be ignored。

Press SCENE button and power ON. The SCENE button light will flash and the switch will clear all saved data and set output resolution at 1080p@60Hz. Package Include: SPLITMUX-HD-4LC x 1 piece IR Remote Control x 1 piece Power adapter x 1 piece Rubber Pad x 4 pieces Mounting screws x 1 bag Specifications: ITEM NO. SPLITMUX-HD-4LC Video Input Resolution 480p、576i、720p@50/60Hz、1080i@50/60Hz、 1080p@24/25/50/60Hz Video Output Resolution 720p@60Hz、1080p@60Hz Video output/Input Interface HDMI Type A x 1 / HDMI Type A x 4 IR Carrier 38Khz / ± 45° / 5M CONSOLE RS-232(F) x 1 Function Button Button x 12 Power Supply DC 12V / 1A Power Consumption 660mA Temperature Operation: -10 to 70℃, Storage: -20 TO 85℃, Humidity: up to 95% Dimension mm 253 x 144 x 40 Weight g 840 REV 9-25-18