Night Owl X Series Quick Setup Manual
Text of the manual
STEP 1: Connecting the DVR to a TV or monitor
If your TV or monitor has RCA inputs (and no VGA input), follow these steps:
A. Locate the BNC-to-RCA video output cable (not included).
B. Connect the BNC end of the cable to a yellow Video Output port on the DVR.
C. Connect the RCA end of the cable to the yellow Video In port on your TV or monitor.
D. Turn yo
STEP 4: Connecting the DVR to a router or modem
A. Locate the blue Ethernet (RJ45) cable.
B. Connect one end of the Ethernet cable to the DVR’s LAN (RJ45) port.
C. Connect the other end of the Ethernet cable to an open port on the router/modem.
To confi gure remote viewing, please refer to the Remote Viewing chapter of the DVR manual.
STEP 5: Entering
