NEUTRIK opticalCON Handling Instruction

NEUTRIK USA INC. NEUTRIK Tokyo Ltd. NEUTRIK France NEUTRIK Vertriebs GmbH NEUTRIK HONG KONG Liechtenstein Great Britain USA Japan France Germany/Netherlands/Austria Hong Kong Tel.: +423/237 24 24 Tel.: +44 1983/811 441 Tel.: +1 732/901 9488 Tel.: +81 3/3663 4733 Tel.: +33 1/4131 6750 Tel.: +49 8131/28 08 90 Tel.: +852 2687 6055 www.neutrik.com Draft. Nr.: BDA 256 Update: 12.06.2012 Data subject to change without prior notice. ©2012 NEUTRIK . ALL RIGHTS RESERVED. NAOBO components  cable tie  2 screws  opticalCON chassis connector (not included)  NAOBO housing  counter nut  90° rear-shell (use for 90° mount)  PG-gland STRAIGHT mount 90° mount Screw NAOBO housing  and the PG- gland  together. 90° mount Don't forget the 90° degree rear-shell .        Handling Instruction opticalCON | NAOBO

T +423 237 2424 | F +423 232 5393 | [email protected] | www.neutrik.com Guide all LC cables carefully through the NAOBO housing . ATTENTION: Make sure that the dust caps cover the LC-ferrules. Remove dust caps and connect the LC cables to the rear side of the opticalCON chassis connector  and mount chassis With help of the screws . Tighten PG-gland  to reduce inner diameter of the insert and achieve a correct cable retention. Use cable tie  to attach NAOBO to equipment (e.g. rack), rigs, etc. fastening thread