Watchguard DIGITAL V2 Quick Start Manual
Text of the manual
This guide aims to give you a quick overview of the 5 basic steps required to install your Watchguard� Digital
Security System, as well as its basic operation. It is important that you follow the step-by-step instructions
detailed in the full installation manual to ensure correct operation and full understanding of the system.
Once the locat
Set the Main Control Unit
into wireless siren auto
test mode by setting DIP
switches 1 and 5 to ON.
Turn the external siren
keyswitch to ON and then
hold the siren in the
desired mounting position.
When this mode is entered
the strobe on the siren will
flash every 5 seconds, and
the main unit will beep out
the signal strength every 5
s
