MMP No Hammer Assembly Instructions
Text of the manual
Included in the Package:
Additional Components you will need:
> Machine Assemblies
> Connecting Bar
Either a Mitchell Metal Stand #589760,
> Foot Pedal Assembly
> Hardware Bag(nuts&bolts…)
a Wood Stand - we have plans and a
Hardware Pack #589764, an existing
Equipment you will need:
stand or one of your own design.
You will need to fasten bol
Step 1: Drill and Mount Machine Assembly A1.
If you have a Wood Stand and need holes, see the included Drilling
Diagram and use the appropriate holes for the "NO HAMMER"
on the drawing. The appropriate size drill bit is 5/16". You will be
drilling 5 holes for both Machine Assembly A1 & A2.
Insert three ¼" flat head screws in to Machine
