Merlin Sonic X ANC Quick Start Manual

instruction manual carefully before using the product. The documentation provided will allow you to fully enjoy all the features this unit has to offer. Please save this manual for future reference. Product Overview Sonic X ANC Automatic On/Off Auto on: Take the earphone out of the charging box, and the earphone will be on automatically. Auto off: Put the earphone into the charging box, the earphone will be disconnected and turned off. Active Noise Reduction Function: - When two ear buds are being used, hold the touch key on the right ear bud for 2 seconds, and Active noise reduction function is activated or canceled. Call Functions Bluetooth Pairing Two ear buds will be paired automatically with each other when you remove from the case and turned on. Pairing between the earplugs and the mobile phone: Take out the earplugs from the charging box, the main earplug (right) will enter into pairing mode automatically (red and green lights on the main earplug flicker alternatively), and enable Bluetooth of the mobile phone to search, pair and connect. Music Control Voice Assistant When two ear buds are in use, hold the touch key on the left ear bud for 2-3 seconds. Clear Bluetooth Pairing Take the two ear buds out of the charging box, and then put them back into the charging box. When the indicators on the earplugs are in red for charging, hold touch key for 10 seconds simultaneously. When the indicator flickers for 3 times, pairing information will be cleared. Note: The user cannot clear connecting and pairing information for the left and right earplugs through any key. all-guides.co m

FAQ: Q) Can’t find the headphones in the Bluetooth list? A) Please make sure your headphones are not connected with any other devices before searching the headphones from Bluetooth settings. If it is connected with other device, either switch off the Bluetooth of the connected device or clear the pairing in the earphones by press and hold the Touch key for 10 seconds.( Before try to clear pairing make sure headphones are switched off) Q) Can’t turn on the headphones? A) Make sure both headphones are fully charged. Maintenance: 1.Retain these instructions for future use. 2.Clean the product with a damp cloth and mild soap. 3.Be careful not to turn or twist the cables used in this product too much as it can lead to malfunction and failure. 4.This product is not designed to be submerged in water and will malfunction if this occurs. 5.This product has no user serviceable items inside. Do not open this product as the user risk injury and would void the warranty. 6.Keep unit away from strong magnetic fields to avoid interference with the product. Earphone Mode Status of indicator ON Green light is on for 1 second OFF Red light is on for 1 second Standby No light Connect again No light Earphone pairing state Red and green lights flicks alternatively Earphone charging state Red light is on Earphone is fully charged No light Charging box is fully charged 3 LED lights are on