K-array Azimut Series Operation & User’s Manual

Azimut Minimalist design, maximum connectivity USER GUIDE Azimut-KAMUT2L1 Azimut-KAMUT2L14 Azimut-KAMUT2V25 Azimut-KAMUT2L ll-guides.co

7 Permanent installation, wall plug 7 Subwoofer 8 Wireless Remote 8 Wired Remote 9 Remote Connectivity 9 Azimut Discovery app 9 Bluetooth pairing 9 Reset Network Parameters 10 Azimut Control Interface 10 Main menu 11 Network & Bluetooth 11 Local streaming 12 Advanced settings 13 SYSTEM UPDATE 13 UPDATE VIA USB 13 Hardware control setup 14 Output configuration 15 Routing 15 Azimut Remote App 16 Technical Specifications 18 Azimut User Guide

with applicable CE standards and regulations. Before putting the device into operation, please observe the respective country-specific regulations! WEEE Please dispose of this product at the end of its operational lifetime by bringing it to your local collection point or recycling center for such equipment. This symbol alerts the user to the presence of recommendations about the product’s use and maintenance. The lighting flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated, dangerous voltage within the product enclosure that may be of magnitude to constitute a risk of electrical shock. Symbols General heed and warnings This device complies with Restriction of Hazardous Substances Directive. IMPORTANT SAFETY INSTRUCTIONS Read these instructions - Keep these instructions Heed all warnings Installation and commissioning may only be carried out by qualified and authorized personnel. Switch-off the mains power supply before carrying out any connection or maintenance operations. • Read these instructions. • Keep this instructions. • Heed all warnings. • Follow all instructions. • Do not use this apparatus near water. • Clean only with dry cloth. • Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. • Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. • Only use attachments/accessories specified by the manufacturer. • Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/ apparatus combination to avoid injury from tip-over. • Unplug this apparatus during lightning storms or when unused for long periods of time. • This loudspeaker system is intended for professional use. • Beware of sound levels. Do not stay within close proximity of loudspeakers in operation. Loudspeaker systems are capable of producing very high sound pressure levels (SPL) which can instantaneously lead to permanent hearing damage. Hearing damage can also occur at moderate level with prolonged exposure to sound. Check the applicable laws and regulations relating to maximum sound levels and exposure times. • Before connecting the loudspeakers to other devices, turn off the power for all devices. • Before turning the power on or off for all devices, set all volume levels to minimum. • Use only speaker cables for connecting speakers to the speaker terminals. • Be sure to observe the amplifier’s rated load impedance particularly when connecting speakers in parallel. Connecting an impedance load outside the amplifier’s rated range can damage the devices. • Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power- supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. • K-array will not shoulder any responsibilities for products modified without prior authorization. • K-array cannot be held responsible for damage caused by improper use of the loudspeakers. Warning. Failure to follow these safety instructions could result in fire, shock or other injury or damage to the device or other property. Azimut User Guide

To ensure proper operation, please carefully read this owner’s manual and safety instruction before using the product. After reading this manual, be sure to keep it for future reference. Should you have any questions about your new device please contact K-array customer service at [email protected] or contact the official K-array distributor in your country. Your new speaker has Spotify Connect built in. You need a Spotify account to take advantage of Spotify Connect. Spotify Connect lets you control the music playing on your device, using the Spotify app on your mobile, tablet or PC. Listening is seamless. You can take calls, play games, even switch your phone off – all without interrupting the music. Learn more at spotify.com/connect The Spotify software is subject to third party licenses found here: www.spotify.com/connect/third-party-licenses Listen out loud with Spotify Connect 1. Connect your Azimut-KA02 to your local network; 2. Open up the Spotify app on your phone, tablet or laptop using the same network; 3. Play a song and select Devices Available; 4. Select your Azimut-KA02 and start listening. Azimut User Guide