K&K M6500K Manual 

12024DI / K&K M6500K / KV030 / Bogen-2018 M6500K Marder-Abwehr für eine Motorraumanpassung inkl. Sicherheitsmotorhaubenschalter 3-fach wirksam durch: Ultraschall, Hochspannung und pulsierendes Licht - che Stromstöße, die den Marder nur verjagen und nicht töten) und durch sehr starke, aggressiv pulsierende Ultraschalltöne. Die weiteren Vorzüge: • Äußerst geringe Stromaufnahme (< 0,005 A) • • - • • Autoelektronik überwacht wird und der Motor ausgeschaltet ist). • Ein Anschluss an die Klemme 15 ist nicht mehr erforderlich, dadurch verringerte Einbauzeit • Zu beachten: • • • - - • Ňießen kann. • Technische Änderungen vorbehalten. Lieferumfang: • 1 Basisgerät mit eingebautem Lautsprecher und Kompaktstecker • 1 Kabelsatz mit Kompaktkupplung und Ňiegendem Sicherungshalter mit eingesetzter Sicherung 1A • 1 Motorhaubenschalter • - haubenschalter 4,2 x 16 • 1 Klebeschild „Achtung Hochspannung“ • • 5 Edelstahlschrauben

12024DI / K&K M6500K / KV030 / Bogen-2018 Vor dem Einbau zu beachten: Achtung! Zeit abwarten, oder Sie ziehen den Kontaktstecker, so dass die Verbindung zwischen dem Ladekondensator in der Steuereinheit und den Allgemeine Das Grundgerät wird an einer trockenen Stelle nicht zu heiß Ultraschalltöne sich gut im Motorraum verteilen können. Das Pluskabel mit dem eingebauten Sicherungshalter kommt an „+ 12 V“. Das Massekabel kommt an die Fahrzeugmasse oder „- 12 V“. Lautsprecher im Gerät sollte deshalb auf die bissgefährdeten Stellen strahlen (innerhalb des Abstrahlkegels von ca. 140 Grad). Das Hochspannungskabel wird so im Motorraum verlegt, dass die an den bissgefährdeten Stellen werden können. könnte schmelzen). daran zu erkennen, dass es mit Abstand das längste Kabel ist an der Marderscheuche (ca. 4,5 m). Die rechteckigen haben jeweils 3 Bohrungen und können längs und quer, zum Kabelverlauf, sowie in 3 verschiedenen auf den angebracht und somit den Gegebenheiten im Motor individuell angepasst werden. So können Hohlräume im Motorraum abgedeckt werden. Die Wege des Marders werden „verengt“, ein Kontakt mit Hochspannung wird unausweichlich. geführt wird. Bei dünnem Hochspannungskabel nehmen Sie die dünne Bohrung, bei dickerem Hochspannungskabel nehmen Sie die dickere dem Hochspannungskabel her. Kabelende am Motorhaubenschalter endet elektrischen Kontakt zur Fahrzeugmasse bekommt. Der Stecker für den Motorhaubenschalter und Kabelende des Hochspannungskabels sind Masse (Chassis) herstellen. Dazu legen Sie eine Schrauböse unter die Schraube und schließen diese über ein Kabel mit dem Autochassis zusammen. gelben „Achtung Hochspannung“ an einer gut sichtbaren Stelle in der Nähe der - xieren. Erst nach dem Verlegen des Kabels fest verschrauben und dabei das Hoch- spannungskabel „anzapfen“ und den elek- herstellen. cable has been laid, while „tapping“ the high-voltage cable and establishing the electrical contact with the high-voltage plate.

12024DI / K&K M6500K / KV030 / Bogen-2018 /ŶďĞƚƌŝĞďŶĂŚŵĞ͗ ŝĞ^ŝĐŚĞƌƵŶŐ͕ĚŝĞǀŽƌĚĞƌDŽŶƚĂŐĞĂƵƐĚĞŵ^ŝĐŚĞƌƵŶŐƐŚĂůƚĞƌŐĞŶŽŵŵĞŶǁƵƌĚĞ͕ǁŝƌĚǁŝĞĚĞƌĞŝŶŐĞďĂƵƚ͘DŽƚŽƌŚĂƵďĞƐĐŚůŝĞƘĞŶŽĚĞƌ DŽƚŽƌŚĂďĞŶƐĐŚĂůƚĞƌŐĞĚƌƺĐŬƚŚĂůƚĞŶ͕ƵŵĚŝĞDĂƌĚĞƌƐĐŚĞƵĐŚĞnjƵƚĞƐƚĞŶ͘tĞŶŶĂůůĞƐƌŝĐŚƟŐĂŶŐĞƐĐŚůŽƐƐĞŶǁƵƌĚĞƵŶĚƐŝĐŚĚĂƐ&ĂŚƌnjĞƵŐ ŝŶWĂƌŬƐƚĞůůƵŶŐďĞĮŶĚĞƚ͕ďĂƵƚƐŝĐŚĚŝĞ,ŽĐŚƐƉĂŶŶƵŶŐĂŶĚĞŶ<ŽŶƚĂŬƚƉůĂƩĞŶĂƵĨƵŶĚĚŝĞŬůĞŝŶĞ>ĞƵĐŚƚĚŝŽĚĞ;,ŝŐŚsŽůƚĂŐĞͿĂŵ^ƚĞƵĞƌŐĞƌćƚ ĨćŶŐƚĂŶnjƵďůŝŶŬĞŶ;ĐĂ͘ĂůůĞϱ͘͘͘ϭϮ^ĞŬ͘Ϳ͘ĞŝĚĞƌĞƌƐƚĞŶ/ŶďĞƚƌŝĞďŶĂŚŵĞŬĂŶŶĚĂƐďŝƐnjƵϱDŝŶƵƚĞŶĚĂƵĞƌŶ͕ďŝƐŶĂĐŚĚĞŵŝŶƐĐŚĂůƚĞŶĚŝĞ> ďůŝŶŬƚ͘ŝĞ>ͣhůƚƌĂƐŽŶŝĐ͞ďůŝŶŬƚĂƵĐŚŝŶƵŶƌĞŐĞůŵćƘŝŐĞŶďƐƚćŶĚĞŶĐĂ͘ĂůůĞϭ͘͘͘ϯ^ĞŬ͘ ŚĞĐŬůŝƐƚĞĨƺƌ&ĞŚůĞƌƐƵĐŚĞ͗ tĞŶŶĚĂƐ'ĞƌćƚƚƌŽƚnjƉŽƐŝƟǀĞŵdĞƐƚǀŽƌĚĞŵŝŶďĂƵŶŝĐŚƚĨƵŶŬƟŽŶŝĞƌƚ͕ůŝĞŐƚĞŝŶDŽŶƚĂŐĞĨĞŚůĞƌǀŽƌ;ƐŝĞŚĞŝŶďĂƵĂŶůĞŝƚƵŶŐͿ͘tŝƌůĞŝƐƚĞŶ 'ĞǁćŚƌůĞŝƐƚƵŶŐĂƵĨĚĂƐ'ĞƌćƚŶĂĐŚĚĞŵ'ĞƐĞƚnj͕ŬĞŝŶĞmďĞƌŶĂŚŵĞǀŽŶDŽŶƚĂŐĞͲƵŶĚĞŵŽŶƚĂŐĞŬŽƐƚĞŶ͘ ϭ͘ EĂĐŚŵĞƐƐĞŶ͗ůŝĞŐƚĚŝĞĞƚƌŝĞďƐƐƉĂŶŶƵŶŐϭϮs;'ůĞŝĐŚƐƉĂŶŶƵŶŐ͕ƵƚŽďĂƩĞƌŝĞͿnjǁŝƐĐŚĞŶĚĞŶŶƐĐŚůƺƐƐĞŶнϭϮsƵŶĚDĂƐƐĞ;ͲϭϮsͿ͍;ĚŝĞ ^ƉĂŶŶƵŶŐŵƵƐƐnjǁŝƐĐŚĞŶϭϭͲϭϯ͕ϰsůŝĞŐĞŶ͕ĂŶĚĞƌĞ^ƉĂŶŶƵŶŐĞŶĨƺŚƌĞŶnjƵƌďƐĐŚĂůƚƵŶŐĚĞƌDĂƌĚĞƌƐĐŚĞƵĐŚĞͿ͘ Ϯ͘ /ƐƚĚĞƌDŽƚŽƌĂƵƐŐĞƐĐŚĂůƚĞƚƵŶĚĚŝĞĂƩĞƌŝĞǁŝƌĚŶŝĐŚƚĚƵƌĐŚĞŝŶĞdžƚĞƌŶĞƐ>ĂĚĞŐĞƌćƚĂƵĨŐĞůĂĚĞŶ͍ŝĞDĂƌĚĞƌƐĐŚĞƵĐŚĞƐĐŚĂůƚĞƚƐŝĐŚĞƌƐƚ ĚĂŶŶĞŝŶ͕ǁĞŶŶĚĞƌŬŬƵŶŝĐŚƚŵĞŚƌŶĂĐŚŐĞůĂĚĞŶǁŝƌĚ;DŽƚŽƌƐƚĞŚƚ͊Ϳ͘ ϯ͘ ŝĞ<ŽŶƚĂŬƚƉůĂƩĞŶŵƺƐƐĞŶĨƌĞŝŵŽŶƟĞƌƚƐĞŝŶƵŶĚĚƺƌĨĞŶŬĞŝŶĞsĞƌďŝŶĚƵŶŐnjƵĂŶĚĞƌĞŶ&ĂŚƌnjĞƵŐƚĞŝůĞŶŚĂďĞŶ;<ƵƌnjƐĐŚůƵƐƐŐĞĨĂŚƌͿ͘ ϰ͘ ^ƚĞŚĞŶĂůůĞ<ŽŶƚĂŬƚĞŝŵ^ƚĞĐŬǀĞƌďŝŶĚĞƌnjƵŵĂƐŝƐŐĞƌćƚŐĞƌĂĚĞ͍KĚĞƌŝƐƚĞŝŶWŝŶƐĞŝƚůŝĐŚǁĞŐŐĞďŽŐĞŶĚƵƌĐŚǀĞƌŬĂŶƚĞƚĞƐŝŶƐƚĞĐŬĞŶ͍/Ɛƚ ĚĞƌ^ƚĞĐŬǀĞƌďŝŶĚĞƌƌŝĐŚƟŐŚĞƌƵŵnjƵƐĂŵŵĞŶŐĞƐƚĞĐŬƚ͍;ĞƐŝƐƚĞŝŶĞŝŶƌĂƐƚͲEĂƐĞƐĞŝƚůŝĐŚĂŵ^ƚĞĐŬǀĞƌďŝŶĚĞƌͿ͘ ϱ͘ /ƐƚĚŝĞ^ŝĐŚĞƌƵŶŐŝŶĚĞŶ^ŝĐŚĞƌƵŶŐƐŚĂůƚĞƌŐĞƐƚĞĐŬƚƵŶĚĂƵĐŚŝŶƚĂŬƚ͍ ϲ͘ ŝƩĞďĞĂĐŚƚĞŶ^ŝĞ͕ĚĂƐƐĂůůĞŝŶͲƵŶĚƵƐƐĐŚĂůƞƵŶŬƟŽŶĞŶŵŝƚŵĞŚƌĞƌĞŶ^ĞŬƵŶĚĞŶsĞƌnjƂŐĞƌƵŶŐĂďůĂƵĨĞŶ͊ ϳ͘ tĞŶŶ^ŝĞĚŝĞDŽƚŽƌŚĂƵďĞŐĞƂīŶĞƚŚĂďĞŶ͗ĚƌƺĐŬĞŶ^ŝĞŵŝƚĚĞƌ,ĂŶĚĚĞŶDŽƚŽƌŚĂƵďĞŶƐĐŚĂůƚĞƌĨƺƌŵĞŚƌĞƌĞDŝŶƵƚĞŶŚĞƌƵŶƚĞƌ͕ǁĞŝůĞƌ ĚŝĞ,ŽĐŚƐƉĂŶŶƵŶŐďĞŝŐĞƂīŶĞƚĞƌDŽƚŽƌŚĂƵďĞŬƵƌnjƐĐŚůŝĞƘƚƵŶĚĚĂŚĞƌĚŝĞ,ŽĐŚƐƉĂŶŶƵŶŐƐͲ<ŽŶƚƌŽůůͲ>ĞƵĐŚƚĞĂŶĚĞƌDĂƌĚĞƌƐĐŚĞƵĐŚĞ ŶŝĐŚƚďůŝŶŬƚ͘ĞŝŐĞĚƌƺĐŬƚĞŵ^ĐŚĂůƚĞƌƐŽůůƚĞĚŝĞ<ŽŶƚƌŽůůͲ>ďůŝŶŬĞŶ͘/ŶĚŝĞƐĞŵƵƐƚĂŶĚďŝƩĞŶŝĐŚƚĚŝĞ,ŽĐŚƐƉĂŶŶƵŶŐƐƉůĂƩĞŶďĞƌƺŚƌĞŶ͊ ĞƌDŽƚŽƌŚĂƵďĞŶƐĐŚĂůƚĞƌĨƵŶŬƟŽŶŝĞƌƚŽƌĚŶƵŶŐƐŐĞŵćƘ͕ǁĞŶŶĚŝĞ,ŽĐŚƐƉĂŶŶƵŶŐƐͲ>ďĞŝŵ>ŽƐůĂƐƐĞŶĚĞƐ^ĐŚĂůƚĞƌƐŶŝĐŚƚŵĞŚƌďůŝŶŬƚ͘ 'ĞĨĂŚƌĞŶŚŝŶǁĞŝƐďĞŝtĂƌƚƵŶŐƐĂƌďĞŝƚĞŶ͗ ƵƌĐŚ ĚĞŶ ĞŝŶŐĞďĂƵƚĞŶ >ĂĚĞŬŽŶĚĞŶƐĂƚŽƌ ŬƂŶŶĞŶ ĚŝĞ <ŽŶƚĂŬƚƉůĂƩĞŶ ĂƵĐŚ ďĞŝ ƵŶƚĞƌďƌŽĐŚĞŶĞƌ ^ƚƌŽŵnjƵĨƵŚƌ ;nj͘͘ ĚƵƌĐŚ ŶƞĞƌŶĞŶ ĚĞƌ ^ŝĐŚĞƌƵŶŐͿŶŽĐŚďŝƐnjƵϯDŝŶ͘,ŽĐŚƐƉĂŶŶƵŶŐŚĂůƚĞŶ͘ŝĞƐĞĞŝƚďƌĂƵĐŚƚĚĞƌĞŝŶŐĞďĂƵƚĞ>ĂĚĞŬŽŶĚĞŶƐĂƚŽƌĨƺƌĚŝĞŶƚůĂĚƵŶŐ͘ƵƌĐŚĚĞŶ sĞƌďĂƵĚĞƐDŽƚŽƌŚĂƵďĞŶƐĐŚĂůƚĞƌƐǁŝƌĚďĞŝPīŶƵŶŐĚĞƌDŽƚŽƌŚĂƵďĞĞŝŶĞƐŽĨŽƌƟŐĞŶƚůĂĚƵŶŐŚĞƌďĞŝŐĞĨƺŚƌƚ͘ŝĞƐŐŝůƚĂƵĐŚĨƺƌĚĂƐŝĞŚĞŶ ĚĞƐ <ŽŶƚĂŬƚƐƚĞĐŬĞƌƐ͕ ĚĂ ĚĂĚƵƌĐŚ ĚŝĞ sĞƌďŝŶĚƵŶŐ njǁŝƐĐŚĞŶ ĚĞŵ >ĂĚĞŬŽŶĚĞŶƐĂƚŽƌ ŝŶ ĚĞƌ ^ƚĞƵĞƌĞŝŶŚĞŝƚ ƵŶĚ ĚĞŶ <ŽŶƚĂŬƚƉůĂƩĞŶ ƐŽĨŽƌƚ ƵŶƚĞƌďƌŽĐŚĞŶŝƐƚ͘ ŝĞ,ŽĐŚƐƉĂŶŶƵŶŐŝƐƚĨƺƌĚĞŶDĞŶƐĐŚĞŶŝŶĚĞƌZĞŐĞůŶŝĐŚƚŐĞĨćŚƌůŝĐŚ;ĞƐŇŝĞƘƚŶƵƌĞŝŶƐĞŚƌŐĞƌŝŶŐĞƌ^ƚƌŽŵͿ͘^ĐŚŽĐŬŐĞĨćŚƌĚĞƚĞWĞƌƐŽŶĞŶ ;,ĞƌnjƐĐŚƌŝƩŵĂĐŚĞƌ͕ ĞƚĐ͘Ϳ ƐŽůůƚĞŶ ĞŝŶĞ ĞƌƺŚƌƵŶŐ ĂďĞƌ ǀĞƌŵĞŝĚĞŶ͘ DĂŶ ďĞŬŽŵŵƚ ĂƵĐŚ ŶƵƌ ĚĂŶŶ ĞŝŶĞŶ ^ƚƌŽŵƐĐŚůĂŐ͕ ǁĞŶŶ ŵĂŶ ĚŝĞ &ĂŚƌnjĞƵŐŵĂƐƐĞƵŶĚĞŝŶĞŐĞůĂĚĞŶĞ,ŽĐŚƐƉĂŶŶƵŶŐƐͲ<ŽŶƚĂŬƚƉůĂƩĞŐůĞŝĐŚnjĞŝƟŐďĞƌƺŚƌƚ;nj͘͘ĞŝŶĞ,ĂŶĚĂŵďůĂŶŬĞŶŚĂƐƐŝƐƵŶĚĚŝĞĂŶĚĞƌĞ ,ĂŶĚĂŶĚĞƌ,ŽĐŚƐƉĂŶŶƵŶŐƐͲ<ŽŶƚĂŬƚƉůĂƩĞͿ͘ ůůŐĞŵĞŝŶĞƌ,ŝŶǁĞŝƐ͕ƐŽůůƚĞĞŝŶDĂƌĚĞƌďĞƌĞŝƚƐŝŶ/ŚƌĞŵ&ĂŚƌnjĞƵŐŐĞǁĞƐĞŶƐĞŝŶ͗ ŝƩĞƐćƵďĞƌŶ^ŝĞǀŽƌĚĞŵŝŶďĂƵĚĞƌDĂƌĚĞƌƐĐŚĞƵĐŚĞŐƌƺŶĚůŝĐŚĚĞŶDŽƚŽƌƌĂƵŵ/ŚƌĞƐ&ĂŚƌnjĞƵŐƐ;ŵŝƩĞůƐDŽƚŽƌǁćƐĐŚĞŽĚĞƌĚĞŵ<Θ< ƵŌŵĂƌŬĞŶĞŶƞĞƌŶĞƌƌƚ͘ϬϬϬϯϬϬͿƵŶĚĂƵĐŚĚĂƐWŇĂƐƚĞƌ͕ĂƵĨĚĞŵ/ŚƌƵƚŽƌĞŐĞůŵćƘŝŐƐƚĞŚƚ;nj͘͘ĂƌƉŽƌƚͿ͘DĂƌĚĞƌŬĞŶŶnjĞŝĐŚŶĞŶ/ŚƌZĞǀŝĞƌ ŵŝƚƵŌŵĂƌŬĞŶƵŶĚŬƂŶŶĞŶƐĞŚƌĂŐŐƌĞƐƐŝǀǁĞƌĚĞŶ͕ǁĞŶŶƐŝĞĚŝĞƵŌŵĂƌŬĞŶĞŝŶĞƐĂŶĚĞƌĞŶDĂƌĚĞƌƐŝŶ/ŚƌĞŵZĞǀŝĞƌƌŝĞĐŚĞŶ͘ hŶƐĞƌĞDĂƌĚĞƌƐĐŚĞƵĐŚĞŶŵŝƚ,ŽĐŚƐƉĂŶŶƵŶŐƐͲ<ŽŶƚĂŬƚƉůĂƩĞŶƵŶĚĂŐŐƌĞƐƐŝǀĞŶhůƚƌĂƐĐŚĂůůƚƂŶĞŶƐŝŶĚćƵƘĞƌƐƚǁŝƌŬƵŶŐƐǀŽůůŝŶĚĞƌďǁĞŚƌ ǀŽŶDĂƌĚĞƌŶ͘dƌŽƚnjĚĞŵƺďĞƌŶĞŚŵĞŶǁŝƌŬĞŝŶĞ'ĂƌĂŶƟĞĚĂĨƺƌ͕ĚĂƐƐŝŶϭϬϬйĂůůĞƌ&ćůůĞĚĞƌDĂƌĚĞƌĂƵĐŚǁŝƌŬůŝĐŚǀĞƌƚƌŝĞďĞŶǁŝƌĚ͊ ,ŝŶǁĞŝƐnjƵŵ>ƂƐĞŶĚĞƐ<ŽŶƚĂŬƚƐƚĞĐŬĞƌƐ͗ hŵĚĞŶ^ƚĞĐŬĞƌůĞŝĐŚƚĞƌƂīŶĞŶnjƵŬƂŶŶĞŶĚŝĞďĞŝĚĞŶdĞŝůĞnjƵŶćĐŚƐƚ ĨĞƐƚŝŶĞŝŶĂŶĚĞƌƐĐŚŝĞďĞŶ͕ĚĂŶŶĞƌƐƚĚŝĞ>ĂƐĐŚĞŶĂĐŚƵŶƚĞŶĚƌƺĐŬĞŶ ƵŶĚŐůĞŝĐŚnjĞŝƟŐĚŝĞďĞŝĚĞŶŶĚĞŶĂƵƐĞŝŶĂŶĚĞƌnjŝĞŚĞŶ͘ /ŶƐƚƌƵĐƟŽŶĨŽƌƌĞůĞĂƐŝŶŐƚŚĞĐŽŶƚĂĐƚƉůƵŐ͗ dŽŵĂŬĞŝƚĞĂƐŝĞƌƚŽŽƉĞŶƚŚĞƉůƵŐ͕ĮƌƐƚŽĨĂůůƉƵƐŚďŽƚŚƉĂƌƚƐĮƌŵůLJ ŝŶƚŽĞĂĐŚŽƚŚĞƌ͘KŶůLJƚŚĞŶƉƌĞƐƐƚŚĞƐƚƌĂƉĚŽǁŶĂŶĚƉƵůůĂƉĂƌƚďŽƚŚ ĞŶĚƐĂƚƚŚĞƐĂŵĞƟŵĞ͘

12024DI / K&K M6500K / KV030 / Bogen-2018 ĞƐƟŵŵƵŶŐƐŐĞŵćƘĞsĞƌǁĞŶĚƵŶŐ͗ sĞƌƚƌĞŝďĞŶ ǀŽŶ DĂƌĚĞƌŶ ƵŶĚ ĂŶĚĞƌĞŶ tŝůĚƟĞƌĞŶ ĂƵƐ ĚĞŵ DŽƚŽƌƌĂƵŵ ǀŽŶ <ƌĂŌĨĂŚƌnjĞƵŐĞŶ ŵŝƩĞůƐ ůĞŬƚƌŽƐĐŚŽĐŬ ƵŶĚ ĂŐŐƌĞƐƐŝǀĞŶ͕ ƉƵůƐŝĞƌĞŶĚĞŶhůƚƌĂƐĐŚĂůůĨƌĞƋƵĞŶnjĞŶ͘ ŶƚƐŽƌŐƵŶŐ͗ tĞŶŶĚĂƐ'ĞƌćƚĞŶƚƐŽƌŐƚǁĞƌĚĞŶƐŽůů͕ĚĂŶŶĚĂƌĨĞƐŶŝĐŚƚŝŶĚĞŶ,ĂƵƐŵƺůůŐĞǁŽƌĨĞŶǁĞƌĚĞŶ͘;ŝƩĞĞƌŬƵŶĚŝŐĞŶ^ŝĞƐŝĐŚŝŶ/ŚƌĞŵ'ĞŵĞŝŶĚĞďƺƌŽ ŽĚĞƌŝŶĚĞƌ^ƚĂĚƚǀĞƌǁĂůƚƵŶŐŶĂĐŚůĞŬƚƌŽŶŝŬͲDƺůůͲ^ĂŵŵĞůƐƚĞůůĞŶͿ͘ ŶŵĞƌŬƵŶŐ͗ ĂŵŝƚĚĞƌDĂƌĚĞƌĞŝŶĞŶĞůĞŬƚƌŝƐĐŚĞŶ^ĐŚůĂŐďĞŬŽŵŵƚ͕ŵƵƐƐĞƌĞŝŶĞĚĞƌ,ŽĐŚƐƉĂŶŶƵŶŐƐͲ<ŽŶƚĂŬƚƉůĂƩĞŶďĞƌƺŚƌĞŶ;nj͘͘ŵŝƚĚĞƌ^ĐŚŶĂƵnjĞ ŽĚĞƌĚĞŶsŽƌĚĞƌͲWĨŽƚĞŶͿƵŶĚŐůĞŝĐŚnjĞŝƟŐĚŝĞ&ĂŚƌnjĞƵŐͲDĂƐƐĞ;nj͘͘ŵŝƚĚĞŶ,ŝŶƚĞƌͲWĨŽƚĞŶͿ͘ /ŶĚĞƌZĞŐĞůƐŝŶĚƚƌŽƚnjǀĞƌŵĞŚƌƚĞŵ<ƵŶƐƚƐƚŽīĞŝŶƐĂƚnjŝŵDŽƚŽƌƌĂƵŵ͕ĂƵƐƌĞŝĐŚĞŶĚƐƚƌŽŵůĞŝƚĞŶĚĞ;ŵĂƐƐĞŐĞďĞŶĚĞͿdĞŝůĞǀŽƌŚĂŶĚĞŶ͘Ğŝ ĞĚĂƌĨŬĂŶŶĂďĞƌĂƵĨĚŝĞĂůƐƵďĞŚƂƌĞƌŚćůƚůŝĐŚĞDĂƐƐĞŵĂƩĞ;ƐĞůďƐƚŬůĞďĞŶĚĞ͕ůĞŝƚĞŶĚĞDĂƩĞ͕ƌƚ͘ϭϬϬϯͿnjƵƌƺĐŬŐĞŐƌŝīĞŶǁĞƌĚĞŶ͘ dĞĐŚŶŝƐĐŚĞĂƚĞŶ͗ ĞƚƌŝĞďƐƐƉĂŶŶƵŶŐ͗ϭϮsƵƚŽďĂƩĞƌŝĞͿ ^ƚƌŽŵĂƵĨŶĂŚŵĞĚƵƌĐŚƐĐŚŶŝƩůŝĐŚ͗фϱŵ;цϮϬйͿ ďƐĐŚĂůƚĂƵƚŽŵĂƟŬ͗ǁĞŶŶĚŝĞĂƩĞƌŝĞƐƉĂŶŶƵŶŐфϭϭ͕ϲs;цϬ͕ϯsͿƐŝŶŬƚƵƐŐĂŶŐƐƐƉĂŶŶƵŶŐ͗ĐĂ͘ϮϱϬͲϯϬϬsͬ;цϮϬйͿ hůƚƌĂƐĐŚĂůůĨƌĞƋƵĞŶnj͗ĐĂ͘Ϯϭ͕ϱŬ,njцϭϬй ^ĐŚĂůůĚƌƵĐŬ͗ŵĂdž͘ĐĂ͘ϭϮϬĚцϮϬй ďƐƚƌĂŚůǁŝŶŬĞůhůƚƌĂƐĐŚĂůů͗ĐĂ͘ϭϰϬ'ƌĂĚ >ĂƵƚƐƉƌĞĐŚĞƌ͗^ƉĞnjŝĂůͲWŝĞnjŽͲhůƚƌĂƐĐŚĂůůͲ,ŽĐŚůĞŝƐƚƵŶŐƐůĂƵƚƐƉƌĞĐŚĞƌŵŝƚ<ƵŶƐƚƐƚŽīŵĞŵďƌĂŶ;ŐĞŐĞŶ&ĞƵĐŚƟŐŬĞŝƚͿ dĞŵƉĞƌĂƚƵƌďĞƌĞŝĐŚ͗ĐĂ͘ͲϮϱ͘͘͘нϴϬ'ƌĂĚ &ƵŶŬƟŽŶƐĂŶnjĞŝŐĞ͗ϮďůŝŶŬĞŶĚĞ>ǭƐ;,ŽĐŚƐƉĂŶŶƵŶŐƐͲƵŶĚhůƚƌĂƐĐŚĂůůŬŽŶƚƌŽůůĞͿ DĂƘĞ'ƌƵŶĚŐĞƌćƚ͗ĐĂ͘ϵϬdžϴϬdžϱϲŵŵ;>džy,Ϳ;ŽŚŶĞ>ǭƐнĞĨĞƐƟŐƵŶŐƐĨƺƘĞͿ <ĂďĞůůćŶŐĞ,ŽĐŚƐƉĂŶŶƵŶŐƐŬĂďĞů͗ĐĂ͘ϰ͕ϱŵ;цϭϬйͿ ^ŝĐŚĞƌƵŶŐŝŵ^ŝĐŚĞƌƵŶŐƐŚĂůƚĞƌ͗ϭ ,ŽĐŚƐƉĂŶŶƵŶŐƐŬŽŶƚĂŬƚƉůĂƩĞŶ͗ϱ^ƚƺĐŬĚĞůƐƚĂŚůͲ<ŽŶƚĂŬƚƉůĂƩĞŶĐĂ͘ϮϮdžϭϬϱŵŵ͕WŽƐŝƟŽŶďĞůŝĞďŝŐĂƵĨĚĞŵ<ĂďĞůǀĞƌƐĐŚŝĞďďĂƌ͘ DƂŐůŝĐŚĞƐƵďĞŚƂƌ;ŐĞŚƂƌƚŶŝĐŚƚnjƵŵ>ŝĞĨĞƌƵŵĨĂŶŐͿ͗ ƌǁĞŝƚĞƌƵŶŐƐͲ^ĂƚnjDϲϱϬϬͲ<ŝƚŵŝƚϱǁĞŝƚĞƌĞŶ<ŽŶƚĂŬƚƉůĂƩĞŶ͕ďĞŝŐƌŽƘĞŶDŽƚŽƌƌćƵŵĞŶ͘ hŵĚŝĞǀŽƌŚĂŶĚĞŶĞŶŝĐŚƚůĞŝƚĞŶĚĞ<ƵŶƐƚƐƚŽĪŽĚĞŶƉůĂƩĞĂůƐDĂƐƐĞŐĞďĞƌnjƵǀĞƌǁĞŶĚĞŶ͕ŬĂŶŶĚŝĞDĂƐƐĞŵĂƩĞƌƚ͘Eƌ͘ϭϬϬϯĂůƐƵďĞŚƂƌ ĞƌǁŽƌďĞŶǁĞƌĚĞŶ͘Ăŝ͘Ě͘ZĞŐĞůƚƌŽƚnjŵĞŚƌ<ƵŶƐƚƐƚŽīĞŝŶƐĂƚnjŝŵDŽƚŽƌƌĂƵŵ͕ǀŝĞůĞdĞŝůĞůĞŝƚĞŶĚƐŝŶĚ͕ŝƐƚĚŝĞDĂƩĞŵĞŝƐƚŶŝĐŚƚnjǁŝŶŐĞŶĚ ĞƌĨŽƌĚĞƌůŝĐŚ͘ĞŝŵŝŶƐĂƚnjĂƵĨĚĞƌŽĚĞŶƉůĂƩĞǁŝƌĚƐŽũĞĚŽĐŚĞŝŶŐƌŽƘĞƌĞƌĞŝĐŚůĞŝƚĞŶĚ͕ĚĞƌŐĞƌŶĞǀŽŶDĂƌĚĞƌŶĂůƐ^ƚĞůůŇćĐŚĞŐĞŶƵƚnjƚǁŝƌĚ͘ <Θ<,ĂŶĚĞůƐŐĞƐĞůůƐĐŚĂŌŵď,͕'ĞƌŵĂŶLJ ͲϲϴϳϮϯKŌĞƌƐŚĞŝŵ͕'ĞǁĞƌďĞƉĂƌŬ,ĂƌĚƚǁĂůĚϭϰ dĞů͘нϰϵ;ϬͿϲϮϬϮͲϴϱϵϯϮǁǁǁ͘ŬƵŬͲŵĂƌĚĞƌĂďǁĞŚƌ͘ĚĞ ƵďĞĂĐŚƚĞŶďĞŝ&ƌĞŵĚƐƚĂƌƚ͕^ĐŚŶĞůůůĂĚĞŶƵŶĚ^ĐŚǁĞŝƘĂƌďĞŝƚĞŶ͗ ŝƩĞnjƵŵ^ĐŚƵƚnjǀŽƌƺďĞƌŚƂŚƚĞŶ^ƉĂŶŶƵŶŐƐƐƉŝƚnjĞŶĚŝĞ^ŝĐŚĞƌƵŶŐĚĞƌDĂƌĚĞƌƐĐŚĞƵĐŚĞĞŶƚŶĞŚŵĞŶ͘

Marten defence for an in the engine compartment incl. safety hood switch ... chases away martens with high-voltage plates electrically charged to 200 - 300 V by electric shock in the engine compartment of the motor vehicle (only weak surges that only chase away the ultrasonic sounds. Further advantages: • • ± 0.3 V monitor) • The stainless steel contact plates can be placed at any point of • • no longer monitored by the car electronics and the motor is • terminal 15 is no longer necessary, which • high voltage when the hood is opened. • Also suitable for cars with CAN bus. To be observed: • The marten scarer should be installed by a specialist workshop. • Secure all lines so that they cannot come into contact with excluded, too. • Important: The high-voltage contact plates have to be assembled in such a manner that the uninsulated contact plates are > 10 mm away from other live contacts in the car. Furthermore, the uninsulated contact surface should not touch other parts either (risk of short-circuit). This also applies to • is to be avoided. Fix the plates in such a way that the water can • Subject to technical changes. Scope of supply: • 1 basic device with built-in loudspeaker and compact connector • 1 cable set with compact coupling and Ňying fuse holder with inserted fuse 1A • 1 engine hood switch • 1 fastening screw for the engine hood switch 4.2 x 16 • • 5 stainless steel contact plates and holder • 5 stainless steel screws To be observed before must be between 11...13.4 V. The high-voltage plates should lie incorporated in the module should Ňash shortly at an interval of is okay and may be installed. During the test please make sure not to touch the high-voltage plates! capacitor in the control unit and the contact plates is interrupted. General assembly Please remove the fuse of the device from the fuse holder during the assembly. Install the basic device in a dry place in the car where it won’t get too hot (please not in the immediate vicinity of the exhaust manifold or ultrasonic sounds can spread well in the engine compartment cable with the built-in fuse holder to “+ 12 V” and the earth cable to the vehicle ground or “- 12 V”. Ultrasonic sounds spread like light, there are „shadows“ (no ultrasonic sounds) behind obstacles. Therefore, the loudspeaker in the device should radiate on the places at risk of being (within the cone Lay the high-voltage cable in the engine compartment in such a manner that the contact plates can be mounted at the places at risk of being . The high-voltage cable should not directly go past could melt). The high-voltage plates can be mounted anywhere on the high- voltage cable. The high voltage cable can be recognized by the fact that it is by far the longest cable at the marten scarer (approx. 4.5 m). The rectangular high-voltage plates have 3 holes each and can be lengthwise and crosswise to the cable route as well as in 3 on the support brackets and thus can be individually adjusted to the in the motor. In this way, hollow spaces in the engine compartment can be covered. The marten‘s paths become „narrowed“, a contact with the high voltage becomes unavoidable. Please make sure that the high-voltage cable is routed through the high-voltage cables, use the thin hole, for thicker high-voltage cables use the thicker cross hole in the contact plate holder. The screw for fastening the high-voltage plate is then inserted through the bore of the high-voltage plate into the bore of the high-voltage plate holder under which the cable is passed, as shown in the drawing. When screwing together, the screw pierces the high-voltage cable and and the high-voltage cable. The contact plates in the motor, which have been completely that the cable with the high-voltage plates is laid in the car so that the cable end ends at the engine hood switch. The engine hood switch is then installed in such a way that it gets an electrical contact to the vehicle earth via the fastening screw. The plug for the engine hood switch and the cable end of the high-voltage cable must be crimped together. In case of a correct assembly, the high voltage in the high-voltage cable is short-circuited to the car chassis via the engine hood switch when opening the engine hood. If the fastening screw at the engine hood switch cannot be screwed into the car this, place a screw eye under the screw and connect it to the car chassis using a cable. yellow warning adhesive label High Voltage!“ in a well visible place in the engine compartment Seite 5 von 6 12024DI / K&K M6500K / KV030 / Bogen-2018

assembly is inserted again. Close the engine hood or keep the engine the high-voltage builds up at the contact plates and the small light- Ňashing Ň on. The LED „Ultrasonic“ also Ňashes at irregular intervals approx. every 1...3 sec. Check list for of assembly and disassembly costs. 1. voltage must be between 11 - 13.4 V, other voltages will cause the 2. external charger? The marten scarer only switches on when the accumulator is no longer charged (motor stops!). 3. The contact plates must be freely mounted and must not have any 4. Are all contacts in the plug connector towards the basic device straight? Or has a pin been bent to the side by being plugged in connector). 5. Is the fuse in the fuse holder and intact? 6. with a delay of several seconds! 7. If you have opened the engine hood: Press the engine hood switch down by hand for several minutes because it short-circuits the high voltage when the engine hood is open and therefore, the high- voltage control light on the marten scarer does not Ňash. When the switch is pressed down, the control LED should Ňash. Please do not touch the high-voltage plates in this state! The engine hood Ňashes upon releasing the switch. Hazard note for maintenance work: 3 minutes due to the integrated charging capacitor. The built-in engine hood switch, immediate discharge is achieved when opening the engine hood. This also applies to pulling the contact plug as the the contact plates will be interrupted immediately. The high voltage is normally not dangerous for humans (there is only a very low current Ň shock (cardiac pacemakers, etc.) should avoid any contact. One will only get an electric shock when touching the vehicle earth and a at the bare chassis and the other hand at the high-voltage contact plate). General note, if a marten has already been in your vehicle: Before installing the marten scarer, please clean the engine compartment of your vehicle thoroughly (by washing the engine the pavement where your car is regularly parked (e.g. carport). Martens mark their territory with scent marks and may become very aggressive if they smell the scent marks of another marten in their territory. Our marten scarers with high-voltage contact plates and aggressive Nevertheless, we do not guarantee that the marten will be actually Intended use: To chase away martens and other wild animals from the engine compartment of motor vehicles by means of electric shock and Disposal: If the appliance is to be disposed of, it must not be thrown away with Remark: In order for the marten to get an electric shock, it must touch one of the high-voltage contact plates (e.g. with the snout or the forepaws) item no. 1003) is available as an accessory. Technical data: decreases output voltage: approx. 250 - 300 V/DC (± 20%) Ultrasonic frequency: approx. 21.5 kHz ± 10% Sound pressure: max. approx. 120 dB ± 20% Loudspeaker: special ultrasonic high-power piezo loudspeaker with Temperature range: approx. - 25 ... + 80 degree C Ňashing LEDs (high-voltage and ultrasound control) Dimensions of the basic device: approx. 90 x 80 x 56 mm (L x W X H) Cable length of the high-voltage cable: approx. 4.5 m (± 10%) Fuse in the fuse holder: 1 A High-voltage contact plates: 5 pieces stainless steel contact plates Possible accessories (not included): Extension set M6500-Kit with 5 further contact plates for larger engine compartments. mass mat item no. 1003 can be is usually not necessary. When used on the base plate, however, a surface to stand on. To be observed in case of external start, rapid charging and welding: please remove the fuse of the marten defence. Seite 6 von 6 12024DI / K&K M6500K / KV030 / Bogen-2018