JVC LT-32R15BU Instructions Manual

Connecting Other Equipment via Scart Most devices support SCART connection. You can connect a; DVD recorder, a VCR or a decoder to your LCD TV by using the SCART sockets. Note that cables shown in the illustration are not supplied. Power off both the TV and the devices before making any connections. For more information, refer to your device’s own instruction book. Note: Scart-2 input supports S-VIDEO (Y/C). REAR VIEW Scart sockets Decoder DVD Recorder Video Recorder ...

Connecting to a DVD Player If you want to connect a DVD player to your LCD TV, you can use connectors of the TV set. DVD players may have different connectors. Please refer to your DVD player’s instruction book for additional information. Power off both the TV and the device before making any connections. Note: Cables shown in the illustration are not supplied. • If your DVD player has an HDMI socket, you can connect via HDMI. When you connect to DVD player as illustrated below, switch to HDMI source. See, “Input Selection” section. • Most DVD players are connected t ...

Connecting to a DVD Player If you want to connect a DVD player to your LCD TV, you can use connectors of the TV set. DVD players may have different connectors. Please refer to your DVD player’s instruction book for additional information. Power off both the TV and the device before making any connections. Note: Cables shown in the illustration are not supplied. • If your DVD player has an HDMI socket, you can connect via HDMI. When you connect to DVD player as illustrated below, switch to HDMI source. See, “Input Selection” section. • Most DVD players are connected t ...

In source menu, highlight a source by pressing “ ” or “ ” button and switch to that mode by pressing “ ” button. Source options are; TV, EXT-1, EXT-2, EXT-2S, FAV, HDMI-1, HDMI-2, HDMI-3, HDMI-4, YPbPr or PC-VGA. Note: Once you have connected optional equipment systems to your TV, you should select the required input to view pictures from that source. PC Mode Menu System See “Connecting the LCD TV to a PC” section for connecting a PC to the TV set. For switching to PC source, press “AV” button on your remote control and select PC input. You can also use “ ...

Connecting the LCD TV to a PC For displaying your computer’s screen image on your LCD TV, you can connect your computer to the TV set. • Power off both computer and display before making any connections. • Use 15-pin D-sub display cable to connect a PC to the LCD TV. • When the connection is made, switch to PC source. See “Input selection” section. • Set the resolution that suits your viewing requirements. Resolution information can be found in the appendix parts. REAR VIEW PC audio cable (not supplied) to AUDIO INPUTS on the TV PC RGB cable (not supplied) to PC ...

Appendix D: PIP/PAP Mode Combinations MAIN TV Scart1 Scart2 Scart2S FAV HDMI1 HDMI2 HDMI3 HDMI4 YPbPr PC- VGA TV 8 9 (RGB) 8 8 8 9 9 9 9 9 9 Scart1 9 (RGB) 8 9 (RGB) 9 (RGB) 9 (RGB) 9 9 9 9 9 9 Scart2 8 9 (RGB) 8 8 8 9 9 9 9 9 9 Scart2S 8 9 (RGB) 8 8 8 9 9 9 9 FAV 8 9 (RGB) 8 8 8 9 9 9 9 9 9 HDMI1 9 9 9 9 9 8 8 8 8 9 9 HDMI2 9 9 9 9 9 8 8 8 8 9 9 HDMI3 9 9 9 9 9 8 8 8 8 9 9 HDMI4 9 9 9 9 9 8 8 8 8 9 9 YPbPr 9 9 9 9 9 9 9 9 8 9 PC-VGA 9 9 9 9 9 9 9 9 9 8 (RGB): This indicates that, selection is possible only if Scart-1 has a RGB signal. Restrictions: Scart-1 source must have RG ...

Connecting the LCD TV to a PC For displaying your computer’s screen image on your LCD TV, you can connect your computer to the TV set. • Power off both computer and display before making any connections. • Use 15-pin D-sub display cable to connect a PC to the LCD TV. • When the connection is made, switch to PC source. See “Input selection” section. • Set the resolution that suits your viewing requirements. Resolution information can be found in the appendix parts. REAR VIEW PC audio cable (not supplied) to AUDIO INPUTS on the TV PC RGB cable (not supplied) to PC ...

the screen. The active window can be changed by pressing “ ” or “ ” button. If the TV is switched to PIP or PAP mode, Pip-Pap submenu will change accordingly and the following settings will appear on the same menu screen. Note that if you switch to PAP mode by using Pip-Pap setting, only Source and Swap options will be active among the menu settings. Pip-Pap This line controls Pip/Pap modes. Use “ ” or “ ” buttons to switch the TV to Pip, Pap or Off. Pip Size Using this setting, you can set the size of the Pip window. Press “ ” or “ ” button to highligh ...