IXIA XGS12 Assembly Manual

The Username for an XGS12 (Windows 7) remote desktop session is ixia and the password is the CPU module serial number found on the sticker located in front of the CPU module. Note: The chassis windows wallpaper is not displayed. So the credentials are required to log on. – 13 – ...

l Empty chassis with air baffles = 70 lbs l Empty chassis without air baffles = 48 lbs l 3 power cords = 6 lbs l Power supply assembly = 29 lbs l Fan Assembly = 10 lbs l CPU card = 10 lbs Do not attempt to lift the fully assembled chassis. Note: l The chassis windows wallpaper is not displayed. So the credentials are required to log on. l The chassis is CE marked and ULTM certified when using the 200-240 VAC power cords supplied with the chassis. However, these certifications for the chassis safety approvals are only valid when the u ...

l Empty chassis with air baffles = 70 lbs l Empty chassis without air baffles = 48 lbs l 3 power cords = 6 lbs l Power supply assembly = 29 lbs l Fan Assembly = 10 lbs l CPU card = 10 lbs Do not attempt to lift the fully assembled chassis. Note: l The chassis windows wallpaper is not displayed. So the credentials are required to log on. l The chassis is CE marked and ULTM certified when using the 200-240 VAC power cords supplied with the chassis. However, these certifications for the chassis safety approvals are only valid when the u ...

1. Loosen the thumbscrew in the upper left corner of the power supply module. 2. Pull the power clamp handles. 3. Hold the two handles provided on the power supply module and pull them. To remove the individual power supplies: 1. Hold the handle on the power supply 2. Pull the clip inwards and then pull the handle out. Individual Power Supply Removal To insert the individual power supplies, slide the power supply in until you hear the clicking sound of the clip. To insert the power supply module: 1. Place the power supply module on the bottom chassis rails as ...

The modules that make up the chassis are as follows: l Chassis Frame Module l Chassis Fan Module l Chassis Power Supply Module l Chassis Processor Module The Processor Module is plugged into the front of the chassis, in slot 0. The power supplies and fans are accessible from the rear of the chassis. Each of the modular components is capable of being removed in the field and replaced with minimum downtime. XGS12 Chassis Back View – 3 – ...

26601 West Agoura Road Calabasas, California 91302 © Keysight Technologies, 2018 ...