GreenWorks MO40L02 Operator's Manual

MOWER ES CORTACÉSPED MANUEL D'UTILISATION FR TONDEUSE www.greenworkstools.com

2 Read all instructions......................... 4 2.1 Children and Bystanders....................................4 2.2 General Operation..............................................4 2.3 Slope Operation................................................. 6 2.4 Service/Maintenance......................................... 6 3 Symbols on the product.................... 7 4 Risk levels...........................................7 5 Environmentally safe battery disposal...............................................7 6 Proposition 65.................................... 8 7 Installation......................................... 8 7.1 Unpack the machine.......................................... 8 7.2 Unfold the lower handle.................................... 8 7.3 Install the upper handle .....................................9 7.4 Install the grass catcher......................................9 7.5 Install the mulch plug........................................ 9 7.6 Install the side discharge chute..........................9 7.7 Set the cutting height....................................... 10 7.8 Install the battery pack.....................................10 7.9 Remove the battery pack................................. 10 8 Operation......................................... 10 8.1 Start the machine............................................. 10 8.2 Stop the machine..............................................11 8.3 Operate the self-propel system........................ 11 8.4 Empty the grass catcher...................................11 8.5 Operate on slopes.............................................11 8.6 Operation tips...................................................11 9 Maintenance.....................................11 9.1 General maintenance....................................... 12 9.2 Replace the blade.............................................12 9.3 Store the machine............................................ 12 9.4 Vertical storage................................................ 12 10 Troubleshooting...............................13 11 Technical data..................................13 12 Limited warranty............................ 13 13 Exploded view..................................15 3 English EN

blade must be approximately parallel to the ground. All four wheels must touch the ground while you mow. 1.2 OVERVIEW 10 7 6 8 9 11 12 3 2 5 4 1 1 Bail switch 2 Start button 3 Upper handle 4 Self-propel lever 5 Speed control button 6 Lower handle 7 Rear discharge door 8 Height adjustment lever 9 Battery door 10 Grass catcher 11 Mulch plug 12 Side discharge chute 1.3 PACKING LIST 1 Lawn mower 2 Grass catcher 3 Side discharge chute 4 Manual 2 READ ALL INSTRUCTIONS DANGER This machine was built to be operated according to the rules for safe operation included in this manual. As with any type of power equipment, carelessness or error on the part of the operator can result in serious injury. This machine is capable of amputating hands and feet and throwing objects. Failure to observe all safety instructions could result in serious injury or death. NOTE When using electric lawn mowers, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and personal injury. These basic precautions include the following: 2.1 CHILDREN AND BYSTANDERS Tragic accidents can occur if the operator is not alert to the presence of children or bystanders. • Keep the area of operation clear of all persons, particularly small children, and pets. • Use extreme care when approaching blind corners, doorways, shrubs, trees, or other objects that may obscure your vision of a child or bystander. Keep children, bystanders, helpers and pets at least 100 feet (30m) from the mower while it is in operation. Stop the machine if anyone enters the area. • Never allow children under 14 years old to operate a power mower. Operators 14 years old and over should fully read and understand the operator’s manual and safety rules. Only responsible individuals who are familiar with these rules of safe operation should be allowed to use this machine. 2.2 GENERAL OPERATION • Read this operator’s manual carefully in its entirety before assembling or operating this machine. Read, understand, and follow all instructions on the machine and in the manuals before operation. Familiarize yourself with the controls and proper use of this machine before operation. Save this manual for future and regular reference. • Do not use the lawn mower for any job except that for which it is intended. Your lawn mower has been designed to perform only one job: cut grass. • Never attempt to make a wheel height adjustment while the motor is running. • Don’t force the lawn mower, it will do the job better and more safely at the rate for which it was designed. • Don’t overreach, keep proper footing and balance at all times. Many injuries occur as a result of the mower being pulled over the foot during a fall caused by slipping or tripping. A slip and fall can cause serious personal injury. If you feel you are losing your footing, release the control 4 English EN

within three seconds. • Thoroughly inspect the area where the equipment is to be used and remove all stones, sticks, wires, bones, and other foreign objects. • Prevent unintentional starting. Ensure the switch is in the off-position before connecting to battery pack, picking up or carrying the appliance. Carrying the appliance with your finger on the switch or energizing appliance that have the switch on invites accidents. • Never pull the mower back toward you while you are walking. If you must back the mower away from a wall or obstruction, first look down and behind you to avoid tripping, and then follow these steps: • Step back from the mower in order to fully extend your arms. • Be sure that you are well balanced. • Pull the mower back slowly. • Disconnect the battery pack from the appliance before making any adjustments, changing accessories, or storing appliance. Such preventive safety measures reduce the risk of starting the appliance accidentally. • Before and while moving backwards with the mower, look behind and down for small children and other people. • Do not operate the mower while under the influence of alcohol or drugs. Stay alert and watch what you are doing at all times. Use common sense and do not operate the lawn mower when you are tired. • Always wear safety glasses or safety goggles during operation and while performing an adjustment or repair to protect your eyes. Thrown objects that ricochet can cause serious injury to the eyes. Always use a face or dust mask if the operation is dusty. • Keep clear of the discharge opening at all times. Do not put hands or feet near rotating parts or under the cutting deck. Contact with the blade can amputate hands and feet. • Plan your mowing pattern to avoid discharge of material toward roads, sidewalks, bystanders and the like. Also, avoid discharging material against walls or obstructions, which may cause discharged material to ricochet back toward the operator. • To help avoid the blade or an injury from a thrown objects, stay in the operator zone behind the handles. • A missing or damaged discharge cover can cause blade contact or injuries from thrown objects. • Objects struck by the lawn mower blade can cause severe injuries to persons. The lawn should always be carefully examined and cleared of all objects prior to each mowing. • Stop the blade when crossing gravel drives, walks or roads. • Follow all charging instructions and do not charge the battery pack or appliance outside of the temperature range specified in the instructions. Charging improperly or at temperatures outside of the specified range may damage the battery and increase the risk of fire. • If lawn mower strikes a foreign object, follow these steps: • Release the bail switch to disengage the motor. • Remove the battery. • Inspect for damage. • Repair any damaged parts before restarting and operating the lawn mower. • Have servicing performed by a qualified repair person using only identical replacement parts. This will ensure that the safety of the product is maintained. • Dress properly, do not wear loose clothing or jewelry that can be caught in moving parts. Use of safety gloves and proper footwear is recommended when working outdoors. Wear sturdy, rough-soled work shoes and close-fitting slacks and shirts. Shirts and pants that cover the arms and legs and steel-toed shoes are recommended. Never operate this machine in bare feet, sandals, slippery or lightweight (e.g., canvas) shoes. • Do not modify or attempt to repair the appliance or the battery pack (as applicable) except as indicated in the instructions for use and care. • Wear protective hair covering to contain long hair. • Avoid dangerous environments, do not use the lawn mower in damp/wet locations or if it is raining. • Store Idle Lawn Mower Indoors – When not in use, appliances should be stored indoors in dry, and high or locked-up place – out of reach of children. Always remove the battery from the mower before storing. • Mow only in daylight or good artificial light. Walk, never run while operating. • If the equipment should start to vibrate abnormally, immediately stop the motor, remove the battery and check for the cause. Vibration is generally a warning that the machine is not functioning properly. • Check bag frequently for deterioration and wear, and replace worn bags. Check that replacement bags comply with the original manufacturer's recommendations or specifications. • Before cleaning the machine, unclogging or removing the grass bag, mulching insert, or side discharge chute, turn the motor off and wait until the blade comes to a complete stop, then remove the battery pack. The cutting blade continues to rotate for a few seconds after the motor is shut off. Never perform these functions until you are sure the blade has stopped rotating. • Keep cutting edges clean and sharp to ensure best performance. • Periodically inspect safety devices and cords for damage. If damaged do not operate the unit until it has been repaired by an authorized service professional. • Never operate the mower without the proper discharge cover, grass bag, mulching insert, side discharge chute, or other safety devices in place and working. Never operate the mower with damaged safety devices. Failure to do so can result in personal injury. • Use only approved batteries and chargers. Non approved batteries and chargers may cause damage to the mower or injure the operator. 5 English EN

catch fire or explode. Check with local codes and waste management for proper disposal instructions. • When battery pack is not in use, keep it away from other metal objects, like paper clips,coins, keys, nails, screws or other small metal objects, that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire. • Do not open or mutilate the battery. Electrolytes contained within the battery are corrosive and may cause damage to eyes or skin if released. It may be toxic if swallowed. • Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns. • Do not expose a battery pack or appliance to fire or excessive temperature. Exposure to fire or temperature above130°C may cause explosion. • Exercise care in handling batteries to avoid shorting the battery with conducting materials such as rings, bracelets, keys, etc. The battery or conductor may overheat and cause burns if contact with said materials is made. • Do not use a battery pack or appliance that is damaged or modified. Damaged or modified batteries may exhibit unpredictable behavior resulting in fire, explosion or risk of injury. 2.3 SLOPE OPERATION Slopes are a major factor related to slip-and-fall accidents, which can result in severe injury. Operation on slopes requires extra caution. If you feel uneasy on a slope, do not mow it. Do: • Mow across the face of slopes; never mow up and down. Exercise extreme caution when changing direction on slopes. • Watch for holes, ruts, rocks, hidden objects, or bumps which can cause you to slip or trip. Tall grass can hide obstacles. Do not: • Mow excessively steep slopes. • Mow near drop-offs, ditches or embankments; you could lose your footing or balance. • Mow slopes greater than 15 degrees. • Mow on wet grass. Unstable footing could cause slipping. 2.4 SERVICE/MAINTENANCE • Check the blade and the motor (machine) mounting bolts at frequent intervals for proper tightness. • Replace the blade if it is bent or cracked. An unbalanced blade causes vibration that could damage the motor drive unit or cause personal injury. • Keep all nuts, bolts, and screws tight in order to ensure the equipment is in safe working condition. • Do not wash with a hose; avoid getting water in motor and electrical connections. • Never remove or tamper with safety devices. Check their proper operation regularly. Never do anything to interfere with the intended function of a safety device or to reduce the protection provided by a safety device. • Keep machine free of grass, leaves, or other debris build up. Allow machine to cool before storing. • Never make any adjustments or repairs with the motor running. • Always remove battery pack from mowers before adjusting, cleaning, or repairing. • Check grass catcher components and the discharge guard frequently and replace with manufacturer’s recommended parts, when necessary. • Sharpen a dull blade equally at each end to maintain the balance. • Keep guards in place and in working order. Mower blades are sharp, and can cut. Wrap the blades or wear gloves, and use extra caution when servicing. • Clean the blade thoroughly and check its balance by supporting it horizontally on a thin nail through its center hole. The nail should also be in a horizontal position. If either end of the blade rotates downward, remove some metal from the heavy or lower end until the blade is balanced. It is balanced when neither end drops. • Use identical replacement blades only. • Maintain Lawn Mower With Care – Keep cutting edges sharp and clean for best and safest performance. Follow instructions for lubricating and changing accessories. Inspect lawn mower cord periodically and if damaged, have it repaired by an authorized service facility. • If situations occur that are not covered in this manual, use care and good judgment or contact Customer Service for assistance. • Never operate the mower without proper guards, plates, or other safety protective devices in place. The recommended ambient temperature range: Item Temperature Mower storage temperature range 32°F (0°C) - 113°F (45°C) Mower operation tempera- ture range 32°F (0°C) - 113°F (45°C) Battery charging temperature range 39°F (4°C) - 104°F (40°C) Charger operation tempera- ture range 39°F (4°C) - 104°F (40°C) Battery storage temperature range 32°F (0°C) - 113°F (45°C) Battery discharging tempera- ture range 32°F (0°C) - 113°F (45°C) 6 English EN

Some of the following symbols may be used on this tool. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the tool better and safer. Symbol Name Explanation V Volt Voltage A Amperes Current Hz Hertz Frequency (cycles per sec- ond) W Watt Power min Minutes Time /min Per Minute Revolutions, strokes, sur- face speed, orbits etc., per minute Alternating Current Type of current Direct Current Type or a characteristic of current no No Load Speed Rotational speed, at no load Safety Alert Precautions that involve your safety. Eye Protec- tion Always wear eye protection with side shields marked to comply with ANSI Z87.1 when operating this equip- ment. WARNING --- Wet Con- ditions Do not expose the product to rain or moist conditions. Read Opera- tor’s Manual To reduce the risk of injury, user must read and under- stand operator’s manual be- fore using this product. Maintain Safety Devi- ces Do not open or remove safety devices while the tool is running. Looking Be- hind While Backing Look down and behind first to avoid tripping when pull- ing back. DANGER --- Keep Hands and Feet Away To reduce the risk of injury, keep hands and feet away from rotating parts. Do not operate unless discharge cover or grass bag is in its proper place. If damaged, replace immediately. Symbol Name Explanation DANGER --- Keep By- standers Away All visitors should be kept at a distance from work area. DANGER --- Thrown Deb- ris Remove objects that can be thrown by the blade in any direction. Wear safety glasses. DANGER --- Steep Slope Hazard Use extra caution on slopes. do not mow slopes greater than 15 degrees. 4 RISK LEVELS The following signal words and meanings are intended to explain the levels of risk associated with this product. SYM- BOL SIGNAL MEANING DANGER Indicates an imminently haz- ardous situation,which, if not avoided, will result in death or serious injury. WARNING Indicates a potentially hazard- ous situation,which, if not avoided, could result in death or serious injury. CAUTION Indicates a potentially hazard- ous situation, which, if not avoided, may result in minor or moderate injury. CAUTION (Without Safety Alert Sym- bol) Indicates a situation that may result in property dam- age. 5 ENVIRONMENTALLY SAFE BATTERY DISPOSAL The toxic and corrosive materials below are in the batteries used in this machine: Lithium-Ion, a toxic material. 7 English EN

contamination of the environment. Before discarding damaged or worn out Li-ion battery, contact your local waste disposal agency, or the local Environmental Protection Agency for information and specific instructions. Take the batteries to a local recycling and/or disposal center, certified for lithium-ion disposal. WARNING If the battery pack cracks or breaks, with or without leaks, do not recharge it and do not use. Discard it and replace with a new battery pack. DO NOT TRY TO REPAIR IT! To prevent injury and risk of fire, explosion, or electric shock, and to avoid damage to the environment: • Cover the terminals of the battery with heavy-duty adhesive tape. • DO NOT try to remove or destroy any of the battery pack components. • DO NOT try to open the battery pack. • If a leak develops, the released electrolytes are corrosive and toxic. DO NOT get the solution in the eyes or on skin, and do not swallow it. • DO NOT put these batteries in your regular household trash. • DO NOT incinerate. • DO NOT put them where they will become part of any waste landfill or municipal solid waste stream. • Take them to a certified recycling or disposal center. 6 PROPOSITION 65 WARNING This product contains a chemical known to the state of California to cause cancer, birth defects or other reproductive harm. Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are: • Lead from lead-based paints; • Crystalline silica from bricks and cement and other masonry products; • Arsenic and chromium from chemically treated lumber. Your risk of exposure to these chemicals varies depending on how often you do this type of work. To reduce your exposure to these chemicals, work in a well-ventilated area, and work with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles. Save these instructions. 7 INSTALLATION WARNING Do not change or make accessories that are not recommended by the manufacturer. WARNING Do not put in the safety key or the battery pack until you assemble all the parts. 7.1 UNPACK THE MACHINE WARNING Make sure that you correctly assemble the machine before use. WARNING • If the parts are damaged, do not use the machine. • If you do not have all the parts, do not operate the machine. • If the parts are damaged or missing, speak to the service center. 1. Open the package. 2. Read the documentation in the box. 3. Remove all the unassembled parts from the box. 4. Remove the machine from the box. 5. Discard the box and package in compliance with local regulations. 7.2 UNFOLD THE LOWER HANDLE 13 6 1. Pull and turn the handle knobs(13) 90°. 2. Unfold the lower handle(6). 3. Line up the handle knobs in one of the three positions on the brackets. 4. Turn the handle knobs 90° until they engage the holes in the brackets. 8 English EN

position. WARNING Do not damage or pinch the cables when you fold or unfold the handle. 7.3 INSTALL THE UPPER HANDLE 15 15 14 14 3 6 1. Align the holes in the upper handle (3) and the lower handle (6). 2. Put the bolts (15) through the holes. 3. Tighten the knobs (14) onto the bolts. 4. Do the same operation on the other side. 7.4 INSTALL THE GRASS CATCHER 7 10 16 1. Remove the mulch plug. 2. Remove the side discharge chute. 3. Open the rear discharge door (7) and hold it. 4. Hold the the grass catcher (10) by its handle and engage the hooks on the door rod (16). 5. Close the rear discharge door. 7.5 INSTALL THE MULCH PLUG 7 11 1. Remove the grass catcher. 2. Open the rear discharge door (7) and hold it. 3. Hold the mulch plug (11) by its handle and fit it in the discharge chute. 4. Close the rear discharge door. 7.6 INSTALL THE SIDE DISCHARGE CHUTE 17 12 CAUTION When you use the side discharge chute, • Do not install the grass catcher. • Keep the mulch plug installed. 1. Open the side discharge door (17) and hold it. 9 English EN

below the pivot. 3. Close the side discharge door. 7.7 SET THE CUTTING HEIGHT The machine can be set to different cutting heights. 8 1. Pull the height adjustment lever (8) rearward to increase the cutting height. 2. Pull the height adjustment lever forward to decrease the cutting height. 7.8 INSTALL THE BATTERY PACK 9 19 20 21 WARNING • If the battery pack or charger is damaged, replace the battery pack or the charger. • Stop the machine and wait until the engine stops before you install or remove the battery pack. • Read, know, and do the instructions in the battery and charger manual. NOTE The machine has a battery storage compartment that helps store the battery pack. 1. Open the battery door (9). 2. Align the lift ribs on the battery pack (20) with the grooves in the battery compartment. 3. Push the battery pack into the battery compartment until the battery pack locks into place. 4. When you hear a click, the battery pack is installed. 5. Close the battery door. NOTE The motor starts only when you put in the safety key (21). 7.9 REMOVE THE BATTERY PACK 1. Open the battery door (9). 2. Remove the safety key (21). 3. Push and hold the battery release button (19). 4. Remove the battery pack from the machine. 8 OPERATION WARNING Wear eye protection during operation. 8.1 START THE MACHINE 5 2 1 4 1. Put in the safety key. 2. Push and hold the start button (2). 3. While you hold the start button, pull the bail switch (1) in the direction of the handle bar. 4. Release the start button to start the machine. Soft-Start This Li-ion machine has a “soft-start” feature. When you start the machine, it goes to full speed after approximately 3 seconds. 10 English EN

examine the mower deck to make sure that: • no grass catches on the blade. • the blade can turn freely by hand. 8.2 STOP THE MACHINE 1. Release the bail switch to stop the machine. WARNING Wait until the blades fully stop before you start the machine again. Do not quickly turn the machine off and on. WARNING Always remove the battery pack after you complete the work. 8.3 OPERATE THE SELF-PROPEL SYSTEM 5 2 1 4 1. Start the machine. 2. While you hold the bail switch (1), push the self-propel lever (4) in the direction of the handle bar. 3. Hold the bail switch (1) and the self-propel lever (4) at the same time with your right hand. 4. Adjust the speed control button (5) with your left hand. • Push the speed control button (5) in the direction of the Rabbit Symbol to increase the speed. • Pull the speed control button in the direction of the Turtle Symbol to decrease the speed. 5. Release the self-propel lever to close the self-propel system. 8.4 EMPTY THE GRASS CATCHER 1. Stop the machine. 2. Remove the safety key. 3. Remove the battery pack. 4. Open the rear discharge door and hold it. 5. Hold the grass catcher by its handle and unhook it from the door rod. 6. Close the rear discharge door. 7. Empty the grass catcher. 8.5 OPERATE ON SLOPES WARNING Do not mow on the slopes with incline more than 15°. If you are not comfortable, do not mow on a slope. WARNING Please keep a low self-propelled speed when you mow on a slope. • Do not go up and down on a slope, mow across the face of the slope. Be careful when you change the direction on a slope. • Monitor the holes, ruts, rocks, and other hidden objects that can cause you to fall. Remove all obstacles such as rocks and tree limbs. • Make sure that your footing is stable. If you are out of balance, release the bail switch immediately. • Do not mow near drop-offs, ditches, or embankments. 8.6 OPERATION TIPS • Do not try to override the operation of the start button or bail switch. • Do not tilt the machine when you start it. • Do not put hands or feet near or below the turning parts. • Keep the discharge chute clean. • Do not cut wet grass. • Higher blade height is necessary for new or thick grass. • Clean the bottom of the mower deck after each use. Remove grass clippings, leaves, dirt, and other debris. 9 MAINTENANCE WARNING Remove the safety key and battery pack from the machine before maintenance. WARNING Keep the motor and battery pack free from grass, leaves or too much grease. CAUTION Use only approved replacement parts. 11 English EN

touch the plastic parts. Chemicals can cause damage to the plastic, and make the plastic unserviceable. CAUTION Do not use strong solvents or detergents on the plastic housing or components. NOTE Recommended tightening torque (blade): 33-37 Nm. 9.1 GENERAL MAINTENANCE • Before each use, examine the machine for damaged, missing, or loose parts such as screws, nuts, bolts and caps. • Tighten correctly all the fasteners and caps. • Clean the machine with a dry cloth. Do not use water. 9.2 REPLACE THE BLADE WARNING Use only approved replacement blades. WARNING Wear heavy gloves or wind cloth around the blade when you touch the blade. 1. Stop the machine. 2. Make sure that the blade is fully stopped. 3. Remove the safety key and battery pack. 4. Turn the machine on its side. 5. Use a piece of wood to prevent the movement of the blade. 6. Remove the mounting screw with a wrench or socket. 7. Remove the blade. 8. Install the new blade. Make sure that the arrows engage the holes in the blade. 9. Put in the mounting screw and tighten it. 9.3 STORE THE MACHINE • Clean the machine before storage. • Make sure the motor is not hot when you store the machine. • Make sure that the machine does not have loose or damaged parts. If it is necessary, do these steps/ instructions: • Replace the damaged parts. • Tighten the bolts. • Speak to a person at an approved service center. • Store the machine in a dry area. • Make sure that children cannot come near the machine. 9.4 VERTICAL STORAGE 18 1. Remove the grass catcher. 2. Remove the battery and safety key. 3. Pull and turn the handle knobs 90°. 4. Fold down the handle. 5. Turn the handle knobs 90° to lock the handle into position. 6. Stand the machine on end and make sure that the brackets touch the floor. Storage Switch The machine has a storage switch (18) that prevents its startup in the storage position. It is necessary to remove the safety key and the battery pack to prevent accidental startup or unapproved use. The storage switch does not replace this function. 12 English EN

in position. The bolts are not engaged correctly. Adjust the height of the handle and make sure that the knobs and bolts are aligned cor- rectly. The machine does not start. The battery ca- pacity is low. Charge the battery pack. The bail switch is defective. Replace the bail switch. The battery key is not put in. Put in the battery key. The machine cuts grass unevenly. The lawn is rough. Examine the mow- ing area. The blade height is not set correctly. Move the wheels to a higher posi- tion. The machine does not mulch correct- ly. Wet grass clip- pings attach to the deck. Wait until the grass dries before mowing. The mulch plug is missing. Install the mulch plug. The machine is hard to push. The grass is too tall, or the blade height is too low. Increase the blade height. The grass catcher and the blade drags in thick grass. Empty the grass clippings from the grass catcher. There is a high vi- bration in the ma- chine. The blade is un- balanced and worn. Replace the blade. The motor shaft is bent. 1. Stop the mo- tor. 2. Remove the safety key and battery pack. 3. Disconnect the power source. 4. Inspect for damage. 5. Repair the ma- chine before you start it again. Problem Possible cause Solution The machine stops during mowing. The blade height is too low. Increase the blade height. The battery pack is out of power. Charge the battery pack. The grass clip- pings attach to the deck or the blade. Remove the bat- tery pack and check the deck. Operation temper- ature of the ma- chine is too high. Cool the machine. * If you cannot find the solution to these problems, go to the service center. 11 TECHNICAL DATA Voltage 40 V No load speed 2800 RPM Deck Size 21" Height adjustments 1 3/8 - 3 3/4” (3.5 - 9.5) cm Self-propelled speed (2.3-4.44) fps (0.7-1.35) m/s Functions 3-in-1Rear bag & Side Discharge & Mulch Weight (without bat- tery pack) 31 kg (68 lbs) Battery model 2909202/BAF705 and other BAF series Charger model 29482 and other CAF series 12 LIMITED WARRANTY YEAR ANS AÑOS LIMITED WARRANTY GARANTIE LIMITÉE GARANTÍA LIMITADA3 Greenworks hereby warranties this product, to the original purchaser with proof of purchase, for a period of three (3) years against defects in materials, parts or workmanship. Greenworks, at its own discretion will repair or replace any and all parts found to be defective, through normal use, free of charge to the customer. This warranty is valid only for units which have been used for personal use that have not been hired or rented for industrial/commercial use, and that have been maintained in accordance with the instructions in the owners’ manual supplied with the product from new. 13 English EN

1. Any part that has become inoperative due to misuse, commercial use, abuse, neglect, accident, improper maintenance, or alteration; or 2. The unit, if it has not been operated and/or maintained in accordance with the owner's manual; or 3. Normal wear, except as noted below; 4. Routine maintenance items such as lubricants, blade sharpening; 5. Normal deterioration of the exterior finish due to use or exposure. HELPLINE: Warranty service is available by calling our toll-free helpline, at 1-888-909-6757. TRANSPORTATION CHARGES: Transportation charges for the movement of any power equipment unit or attachment are the responsibility of the purchaser. It is the purchaser’s responsibility to pay transportation charges for any part submitted for replacement under this warranty unless such return is requested in writing by Greenworks. USA address: Canadian address: Greenworks Tools Greenworks Tools Canada Inc. P.O. Box 1238 1110 Stellar Drive Unit 102 Mooresville, NC 28115 Newmarket, ON, L3Y 7B7 14 English EN

5 341331179U 1 Bumper cover 6 32205836 4 Screw 7 341061179C 1 Bumper main body 8 311201546 1 Side discharge cover assembly 9 333041179 1 Blade 10 322011179AC 1 Bolt 15 English EN

16 33307470 4 Axle press plate 17 32204113D 8 Screw 18 341281179A 2 8” Wheel assembly 19 341021179 1 Front panel 20 3220343 2 Nut 21 332081531 1 Height adjustment link bar 22 32243563 4 Nut 23 332011179 1 Height adjustment tension spring 24 341033431 1 Rear baffle 25 322051505 9 Screw 26 3333041519 1 Height adjustment bracket (left) 27 3221637 4 Bolt 28 341031577 1 Rear cover 29 32910131 4 Nut 30 312011560 2 Mechanical vertical switch assembly 31 342031179 2 Rubber plug 32 333031560 1 Height adjustment bracket (right) 33 3290506 2 Clip washer 34 332021179 1 Rear cover axle 35 332111179 1 Torsinal spring (rear cover) 36 33401222 1 Torsinal spring 37 3290135 1 Height adjustment bracket 38 311083431 1 Rear wheel axle 39 342011179 1 Rear shield 40 32204113D 4 Screw 41 332041179 1 Press board 42 341271179A 2 10” Wheel assembly 43 332061179 2 Pin 44 341151546 2 Knob 45 332051179 2 Spring 46 332071179A 2 Limit column 47 332081179A 2 Block 48 311302338 1 Height adjustment bar assembly 49 32201467 2 Nut 16 English EN

58 333013455 1 Bail lever 59 342021179 1 Sponge 60 312011179K 1 Grass catcher bag assembly 61 341043431 1 Mulching plug 62 332021512C 1 Lower lever 63 311032338 1 Self-propel speed controls 64 32204113 4 Screw 65 3220404 4 Screw 66 32204113 10 Screw 67 341021531A 1 Dust cover 68 311153455 1 Reducer 69 311051479 1 Key assembly 17 English EN