GFW Madrid Assembly Instructions Manual

ASSEMBLY INSTRUCTIONS PLEASE READ this sheet prior to assembly to familiarise yourself with the various stages of construction. Carefully open the pack supplied and check the contents against the parts and fittings check list. Do not destroy any of the packaging until you are certain that you have all the necessary parts for the assembly. CAUTION: There are small components used in the construction of this unit. These loose items should be kept away from young children whilst assembling your unit to avoid the danger of choking hazards. Page 1 of 21 Tools Required Thank you for purchasing the MADRID 5FT SIDE OPENING OTTOMAN BED. Please read the instructions carefully to ensure safe operation of the product. 1 HOUR 30 MINUTES V1 03/18 Size: 5FT L 2121 X W 1654 X H 1135

FUTURE REFERENCE. Page 2 of 21 INFORMATION  This product is intended for a maximum person’s weight of 110kg per side. Do not exceed this weight.  Due to the size of this product we recommend that it is assembled in the room intended for use  When you are ready to start, make sure that you have the right tools, plenty of space and a clean, dry area for assembly.  Unwrap all packaging materials and place the components on top of the carton box or on a clean floor to prevent it from scratching  Check the pack and make sure you have all the parts listed  Ensure that this product is fully assembled and secured as illustrated before use.  Check all screws or bolts are tightened and inspect regularly  This product should only be used on firm, level ground  Please dismantle for transportation  Tools not included WARNINGS  Keep small parts out of reach of children  Make sure the legs remain in contact with the ground  DO NOT use power tools to construct this product  DO NOT tighten screws until fully assembled  DO NOT over tighten screws or bolts  DO NOT use this product if parts are missing, damaged or worn  DO NOT stand on the product  This bed uses a pressured mechanism, always use caution when operating.  DO NOT remain on the bed whil st the lifting mechanism is in use.  Only use the storage compartment when the frame is fully raised in the up position.  Please pay particular attention when children or animals are present to ensure that no accidental entrapment occurs whilst operating this product.  Keep hand and fingers clear of the mechanism when opening and closing the bed for use.  Incorrect installation could lead to injury, take care following instruction.  Take care when adjusting positions to avoid trapping of body parts. CARE INFORMATION  Never use scourers, abrasives or chemical cleaners.  To clean wipe with a sponge and warm soapy water. Do not use solvent based cleaners or detergents as they can bleach or damage the product. ASSEMBLY INSTRUCTIONS V1 03/18 MADRID 5FT SIDE OPENING OTTOMAN BED

retailer. The fi ngs pack contains small items that should be kept away from small children. Page 3 of 21 (P4) (P5) (P7) (P6) (P11) (P14) (P12) (P3) (P3) (P9) (P9) (P10) (P10) (P16) (P17) ASSEMBLY INSTRUCTIONS V1 03/18 (P8) (P13) (P13) (P1) (P2) MADRID 5FT SIDE OPENING OTTOMAN BED

P7 P8 P9 Page 4 of 21 FRONT TUBE 1PC Carton No: 3 CENTRE TUBE 1PC Carton No: 3 BACK TUBE 1PC Carton No: 3 P4 P5 P6 HINGE 2PCS Carton No: 3 LEFT RIGHT HEADBOARD 1PC Carton No:1 FOOTBOARD 1PC Carton No: 2 SIDE RAIL 2PCS Carton No: 2 P1 P2 P3 Parts ASSEMBLY INSTRUCTIONS V1 03/18 SIDE TUBE 1PC Carton No: 3 MADRID 5FT SIDE OPENING OTTOMAN BED

WOODEN SLAT 28PCS Carton No: 3 NON-WOVEN FABRIC 1PC carton no:1 P13 P14 P15 SUPPORT LEG 2PCS Carton No: 3 MATTRESS STOPPER 2PCS Carton No: 3 P10 P11 P12 Page 5 of 21 Parts P16 1PC carton no:1 HINGE SUPPORT RAIL ASSEMBLY INSTRUCTIONS V1 03/18 P17 1PC carton no:1 HINGE SUPPORT RAIL PISTON 2PCS Carton No: 3 MADRID 5FT SIDE OPENING OTTOMAN BED

CAUTION: There are many small components used in the construction of this product. Please keep these componants away from young children whilst assembling this product. If you keep the fittings in a bowl during assembly you will be less likely to lose them Ref Qty Dimensions H1 H2 H3 H4 H5 H6 10 20 30 40 50 60 70 80 100 120 110 90 JCBC SCREW M6 X 80MM JCBC SCREW M6 X 45MM JCBC SCREW M6 X 15MM BARREL NUT M6 X 16MM DOWEL M10 X 30MM 8 6 8 4 16 38 Fixings (to scale) WOOD BUTTON 8MM (Not to scale) Ref Qty Dimension H11 H12 H13 PLASTIC END CAP PLASTIC CENTRE CAP BELT 1 H10 CORNER BRACKET 4 H9 1 ALLEN KEY M4 28 14 DOWEL M8X 30MM 8 JCBC SCREW M6 X 35MM 6 H7 H8 ASSEMBLY INSTRUCTIONS V1 03/18 MADRID 5FT SIDE OPENING OTTOMAN BED

ASSEMBLY INSTRUCTIONS V1 03/18 MADRID 5FT SIDE OPENING OTTOMAN BED

To operate the ottoman, always use 2 hands at arm's length and only where illustration on this product. You must ensure the mattress is on the bed frame before lifting the mechanism. Failure to do so may result in injury. To ensure your safety please do not stand too close in case the frame bounces up. The weight of the mattress loaded on the frame will keep the frame in a lower position until it is pulled upwards by the user. If removing the mattress, make sure the frame is secured so it does not flip open. When lifting the bed frame, remove pillows and covers. PLEASE NOTE - It takes a lot of force to make the initial movement of the ottoman – THIS IS A DESIGN FEATURE OF THE PRODUCT SO THAT IT DOES NOT FALL SHUT - and the nearer to being closed the ottoman is, the easier it is to move. When the ottoman is almost shut, it will close completely under its own weight. When lowering the slat unit for the first time, take care to make sure it does not rub unevenly on the inside face of the Side Rail. If it does, the bed has been assembled slightly out of square. This can be rectified by moving the Footboard of the bed slightly to the left or right whilst leaving the headboard of the bed frame stationary. Tip for difficulty with compression: If you are experiencing difficulty with the initial compression try fitting one piston at a time (following the Assembly Instructions) then press down on the side of the frame with the piston fitted - this acts like a big lever (The weight of the mattress can be used to supplement the load exerted). Effectively you are doubling the amount of force applied, because you have halved the resistance offered by the pistons. It can take slightly more effort than you might feel comfortable applying to the bed frame at first. Page 8 of 21 Do not attempt to move the bed whilst the frame is in the upright positon ASSEMBLY INSTRUCTIONS V1 03/18 MADRID 5FT SIDE OPENING OTTOMAN BED

ASSEMBLY INSTRUCTIONS V1 03/18 MADRID 5FT SIDE OPENING OTTOMAN BED

Page 10 of 21 ASSEMBLY INSTRUCTIONS V1 03/18 MADRID 5FT SIDE OPENING OTTOMAN BED

Page 11 of 21 ASSEMBLY INSTRUCTIONS V1 03/18 MADRID 5FT SIDE OPENING OTTOMAN BED

Parts Required (H4) JCBC SCREW M6 x 15MM - 4pcs (H9) M4 Allen Key - 1pc Page 12 of 21 (P9) Hinge - 1pc (P10) Piston - 1pc (P1) HEADBOARD - 1pc (H3) JCBC SCREW M6 x 35MM - 3pcs (H7) DOWEL M8 x 30MM - 2pcs (P16) HINGE SUPPORT RAIL - 1pc ASSEMBLY INSTRUCTIONS V1 03/18 STEP 1 RIGHT SIDE OPENING ( HEADBOARD ) Parts Required (H4) JCBC SCREW M6 x 15MM - 4pcs (H9) M4 Allen Key - 1pc Page 12 of 21 (P9) Hinge - 1pc (P10) Piston - 1pc (P1) HEADBOARD - 1pc (H3) JCBC SCREW M6 x 35MM - 3pcs (H7) DOWEL M8 x 30MM - 2pcs (P16) HINGE SUPPORT RAIL - 1pc ASSEMBLY INSTRUCTIONS V1 03/18 RIGHT OPENING (A) “Remove preassembled piston securing bolt from hinge before (H9) (H7) (H16) (H3) (P10) (P9) (B) (C) (P10) (P9) (H4) (H9) (P16) (P1) (H4) (H7) (H7) MADRID 5FT SIDE OPENING OTTOMAN BED

Parts Required (H4) JCBC SCREW M6 x 15MM - 4pcs (H9) M4 Allen Key - 1pc Page 13 of 21 (P9) Hinge - 1pc (P10) Piston - 1pc (P2) FOOTBOARD - 1pc (P17) HINGE SUPPORT RAIL - 1pc (H3) JCBC SCREW M6 x 35MM - 3pcs (H7) DOWEL M8 x 30MM - 2pcs ASSEMBLY INSTRUCTIONS V1 03/18 RIGHT OPENING (P10) (P9) (B) (C) (P10) (A) “Remove preassembled piston securing bolt from hinge before (P17) (H3) (H9) (H7) (H7) (H7) (H4) (P9) (H4) (P17) (P2) MADRID 5FT SIDE OPENING OTTOMAN BED

(H9) M4 Allen Key - 1pc Page 14 of 21 (P9) Hinge - 1pc (P10) Piston - 1pc (P1) HEADBOARD - 1pc (P17) HINGE SUPPORT RAIL - 1pc (H3) JCBC SCREW M6 x 35MM - 3pcs (H7) DOWEL M8 x 30MM - 2pcs LEFT SIDE OPENING ( HEADBOARD ) ASSEMBLY INSTRUCTIONS V1 03/18 LEFT OPENING (A) “Remove preassembled piston securing bolt from hinge before (H7) (H7) (P17) (H3) (H9) (H7) (P1) (P9) (H4) (P17) (B) (C) (P10) (P9) (P10) (H4) MADRID 5FT SIDE OPENING OTTOMAN BED

LEFT SIDE OPENING (FOOTBOARD) ASSEMBLY INSTRUCTIONS V1 03/18 (H4) JCBC SCREW M6 x 15MM - 4pcs (H9) M4 Allen Key - 1pc (P9) Hinge - 1pc (P10) Piston - 1pc (P2) FOOTBOARD - 1pc (H3) JCBC SCREW M6 x 35MM - 3pcs (H7) DOWEL M8 x 30MM - 2pcs (P16) HINGE SUPPORT RAIL - 1pc LEFT OPENING (A) “Remove preassembled piston securing bolt from hinge before (H9) (H7) (P16) (H3) (B) (C) (P10) (P9) (P10) (P2) (H9) (P16) (P9) (H4) (H4) (H7) (H7) MADRID 5FT SIDE OPENING OTTOMAN BED

- 8pcs (H6) DOWEL M10 x 30MM - 16pcs (H8) Wood Button - 8pcs (H9) M4 Allen Key - 1pc (H5) BARREL NUT M6 x 16MM - 8pcs STEP 6 Parts Required W (H4) JCBC SCRE M6 x15MM - 8pcs (H9) M4 Allen Key - 1pc (H10) Corner Bracket - 4pcs Page 16 of 21 (P1) Headboard - 1pc (P2) Footboard - 1pc (P3) Side rail - 2pcs (P1) Headboard - 1pc (P3) SIDE RAIL - 2pcs ASSEMBLY INSTRUCTIONS V1 03/18 W (H2) JCBC SCRE M6 x45MM - 6pcs (P13) HOLDIN TUBE - 2pcs (H4) (P3) (P1) (H9) (P3) (P3) (P13) (P13) (H9) (H2) (H9) (H2) (P2) (P1) (P3) (P1) (P2) (P3) (P1) (P2) REPEAT x 4 (H8) (H8) (H1) (H9) (H1) (H5) (P3) (P1) (P2) (P3) (H6) STEP 4 Outside View STEP 3 Outside View STEP 2 Inside View STEP 1 Outside View MADRID 5FT SIDE OPENING OTTOMAN BED

(H4) JCBC SCREW M6 x15MM - 6pcs (H9) M4 Allen Key - 1pc (P15) Non-Woven Fabric - 1pc STEP 7 Parts Required (P4) Front tube - 1pc (P5) Back tube - 1pc (P6) Centre tube - 1pc (P7) Side tube - 1pc (P11) Mattress stopper - 2pcs (P12) Support leg - 2pcs (H4) JCBC SCREW M6 x 15MM - 16pcs M4 Allen Key -1pc (H13) Belt - 1pc (P5) BACK TUBE - 1pc (P4) (P5) (P6) (P7) (H4) Bracket ( II ) (P6) ( I ) (H9) (P4) FRONT TUBE - 1pc RIGHT SIDE OPENING (H13) ASSEMBLY INSTRUCTIONS (P6) (H9) (P12) (H4) (P8) V1 03/18 slide pull strap H13 onto frame before connecting parts p4 and p8 (H9) (H4) (P11) (H4) (P8) Side tube - 1pc (H4) (H9) (P3) SIDE RAIL - 2pcs (H4) (P15) ( I ) P5 (H4) (H9) 9 (P3) (H4) (H9) P4 MADRID 5FT SIDE OPENING OTTOMAN BED

STEP 9 Parts Required LEFT SIDE OPENING ASSEMBLY INSTRUCTIONS (H4) JCBC SCREW M6 x15MM - 6pcs (H9) M4 Allen Key - 1pc (P15) Non-Woven Fabric - 1pc (P5) BACK TUBE - 1pc (P4) FRONT TUBE - 1pc V1 03/18 (P14) Wooden Slat - 28pcs (H11) Plastic End Cap - 28pcs (H12) Plastic Centre Cap - 14pcs (H11) (H12) (H11) (P14) (P3) SIDE RAIL - 2pcs (P15) ( II ) P5 (H4) (H9) 9 (H4) (H9) P4 MADRID 5FT SIDE OPENING OTTOMAN BED

(H11) Plastic End Cap - 28pcs (H12) Plastic Centre Cap - 14pcs (P6) centre tube -1pc (P7) side tube -1pc (P14) Wooden Slat - 28pcs STEP 11 Parts Required ASSEMBLY INSTRUCTIONS V1 03/18 (P8) side tube -1pc (P8) 1st 2nd 3rd (P7) (P6) (P13) (H12) (H11) (H11) MADRID 5FT SIDE OPENING OTTOMAN BED

Complete Assembly Your bed frame is now completely assembled but the ottoman will not operate correctly unless a mattress is placed on the slat frame and will not stay shut unless the mattress remains in position. To position the mattress on the slat frame, simply place the mattress on top of the slate frame whilst it is in the up (open) position. Li WARNING WHEN STORING ITEMS IN THE OTTOMAN COMPARTMENT ENSURE THEY ARE CLEAR OF THE CENTRE RAIL SUPPORT LEGS WHEN THE BASE IS CLOSED. FAILURE TO DO SO MAY RESULT IN DAMAGE TO THE BED FRAME. ft with the strap (H13) and close with the strap. The strap should always be accessible. Take care not to lean over the bed when lifting, if the mattress is thin and light, the frame may rise quickly. The metal frame. PLEASE NOTE - It take a lot of force to make the initial movement of the ottoman-THIS IS A DESIGN FEATURE OF THE PRODUCT SO THAT IT DOES NOT FALL SHUT - and the nearer to being closed the ottoman is, the easier it is to move. When the ottoman is almost shut, it will close completely under its own weight. ASSEMBLY INSTRUCTIONS V1 03/18 MADRID 5FT SIDE OPENING OTTOMAN BED

Also, make sure the end of connectors are tight and secure. Keep instructions for future reference Page 21 of 21 ASSEMBLY INSTRUCTIONS V1 03/18 MADRID 5FT SIDE OPENING OTTOMAN BED