Lund DEFLECTA-SHIELD EX-935D-03 Installation Instructions

FASTEN THE M-0672 OR M-0673 & M-0674 BRACKETS TOGETHER WITH 5/16 BOLTS, LOCK WASHERS, AND NUTS. M-0674 BRACKET REAR OF TRUCK 935D-03 EX-935D-03 PART # 935D-03 EX-935D-03 M-0672 1 1 M-0673 1 1 M-0674 2 2 A-BOLT 1 1 MUD FLAP DIA 2 MUD FLAP S/S 2 EX & DIAMOND MUD FLAP BOM © 2003 Lund International, Inc. All rights reserved. Deflecta-Shield and the Deflecta-Shield logo are Trademarks of Lund International, Inc. Installation Instructions Dodge Mud Flap 2003 Dodge Ram Dually. MUD FLAP INSTALLATION 1. Using 5/16” bolts, lock washers, and nuts attach the M-0672 or m-0673 angle bracket to the m-0674 bracket (this will make a driver side and a passenger side application). Then hold the brackets up to the pinchweld and against the wheel well and mark thru the hole in the M-0672 or M-0673 and the hole in top of the M-0674. Remove the brackets, and drill an 11/32” hole in each marked location. 2. Attach the M-0674 bracket to the mud flap (on the opposite side of the weights) using 5/16 bolts, flat washers, lock washers, and nuts (note: not all of the flat washers will be used). Make sure that the side of the mud flap that has the weights riveted to it is facing towards the rear of the vehicle. 3. Bolt the brackets thru the holes in the pinch weld and the wheel well lip with 5/16” bolts and nuts.

WEIGHTS ARE FACING THE REAR DRIVER SIDE SHOWN MUD FLAP M-0674 BRACKET DUALLY FENDER WHEEL WELL LIP M-0672 BRACKET OF THE VEHICLE. 5/16 BOLT AND NUT. HERE FOR EXTRA STRENGTH. BRACKET MAY ALSO BE BOLTED DRILL AND FASTEN HERE WITH A PINCH WELD MUD FLAP WEIGHTS THE FLAP MUST EXTEND PAST THE FENDER TO COVER THE TIRES. 7225 N. State Rd. 9 Howe, Indiana. 46746 Phone # 1-800-334-4447 Fax # 1-800-368-4341 www.deflecta-shield.com 2/5/04 10329