Compatico CMP8481S-30 Operating Instructions

NESTING CHAIR OPERATING INSTRUCTIONS LIMITED LIFETIME WARRANTY Compatico chairs are warranted from the date of purchase against failure due to material and workmanship as follows: • Lifetime on component parts including pneumatic cylinder, control mechanism, base and casters. • 3 Years on upholstery fabric and foam against wear and deterioration. • Leather is not warranted against routine scratching and scuffing, as leather is subject to minor blemishes in use. To make a warranty claim, contact: Compatico Quality Control Department. Provide model number, description of the problem, photos, purchase order number and obtain a confirmation number. At its option, Compatico will: (a) Supply compatible components of current manufacture. (b) Repair the customer’s component. It is the customer’s responsibility to prepay freight on any components returned to the factory. Return freight on components covered by warranty will be paid by Compatico. All warranties are limited to the original purchaser for normal commercial usage defined as a standard forty hour work week by persons weighing 250 lbs. or less. This warranty will not cover labor, freight or damage from misuse, abuse, negligence, alteration, accident, vandalism, rusting, acts of nature or any other event beyond the control of Compatico. The warranty does not cover cosmetic damage that may result from normal use Liability for incidental or consequential damages is excluded. The user assumes all risk of injury resulting from use of this product. When usage is more than 40 hours per week, a five year warranty on all parts applies. Fabric is warranted for one year. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Contact us via e-mail [email protected], by Fax 616-940-1040, or toll free parts number 800-336-1772, Monday through Friday 8:00 a.m. - 5:00 p.m. Eastern Standard Time. FEATURES • LOCKING CASTERS Rear casters equipped with brakes. WARNING 1. Use this product only one person at a time. 2. Do not use this chair unless all bolts screws and knobs are securely tightened. 3. Check that all bolts screws and knobs are tight every three months or as needed. 4. Do not overturn back tilt knob when decreasing tension. 5. Dispose of packing material properly. Do not use plastic cover as head covering. It may cause suffocation. 6. Do not use chair as a stepladder. 7. Use this chair for its intended purpose only. 8. Use mild detergent only for cleaning.

2. Caster. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 3. Locking Caster. . . . . . . . . . . . . . . . . . . . . . . 2 4. Seat Cushion. . . . . . . . . . . . . . . . . . . . . . . . 1 5. Backrest. . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 6. Metal Support. . . . . . . . . . . . . . . . . . . . . . . 2 7. Plastic Support. . . . . . . . . . . . . . . . . . . . . . 4 8. Backrest Screw. . . . . . . . . . . . . . . . . . . . . . 2 9. Metal Support Screw. . . . . . . . . . . . . . . . . . 4 10. Allen Wrench (not shown). . . . . . . . . . . . . 1 Remove all parts from carton, separate by part numbers indicated on parts list, and verify part quantities. STEP 1 Insert two Casters (2) to the front of base (1) and two Locking Casters (3) to the rear of Base (1). Push hard until you feel or hear the Casters (2 & 3) snap into place. STEP 2 Attach Base (1) to bottom of Seat Cushion (4) using Plastic Supports (7) and Metal Supports (8), secure Base (1) using Metal Support Screws (9). FULLY TIGHTEN ALL SCREWS USING ALLEN WRENCH (10). STEP 3 Slide Backrest (5) into rear of Base (1), secure Backrest (5) to Base (1) using Backrest Screws (8). FULLY TIGHTEN BACKREST SCREWS (8) USING ALLEN WRENCH (10). ATTENTION: MAKE SURE ALL SCREWS ARE FULLY TIGHTENED BEFORE USING CHAIR. 5 4 8 8 9 6 7 CMP8481S-30 / CMP8482S-30 NESTING CHAIR ASSEMBLY INSTRUCTIONS