Erreka IRPROGM Quick Programming Manual
Text of the manual
This quick guide is a summary of the complete installation manual. The manual contains safety
warnings and other explanations which must be taken into account. The installation manual can
be downloaded by going to the "Downloads" section of Erreka website:
http://www.erreka.com/Automatismos/descargaDocumentos.aspx
1
IRPROGM Console
2
Transmitter pr
Console language setting
1 Turn on the console using the on/off switch. This will
display the message:
.
2 Press Ö. This will display the message:
.
3 Enter the symbol ###### (# six times):
.
4 Press Ö. The language menu is displayed:
(the selected language is shown in the first line, in
capital letters).
5 Use the keys $, &, to select the required langu
Description of console functions
Before using any other function, change the
access code (function CHANGE ACC. CODE), since
the 4 last digits of the access code determine the
YYYY installer code of the console and the different
encodings.
Function ENCODE TRANS.
This function can be used to programme personalised
or standard (non-personalised) transmitte
Function COPY MEMORY
This function allows all the entries to be copied from
one memory card to another, which is very useful when,
for example, making backup copies. The source
memory card is inserted in socket A and the target
memory card in socket C.
If a 250 code memory card is completely full and more
capacity is needed, proceed in one of the following
