Xview XV4KDVR Operation & User’s Manual

Playback Mode: Touch the playback symbol to display all video or photos taken. Use the [UP] and [DOWN] arrows to scroll through files. Touch the file thumbnail to view or playback. Icons will appear at the bottom of the screen to return to previous screen, previous file, next file, delete or play. Protected files: The thumbnail will have a red warning triangle icon. When you select the file for playback a key symbol will appear at the top of the screen. 7. ACCESSING FILES VIA YOUR COMPUTER 8. RESETTING THE DASH CAM To access video and images from your Dash Cam, co ...

The internal battery is small and only designed to provide enough power to securely save the last recording when power is disconnected and to retain date and time settings. The Dash Cam is designed to be connected to power at all times when operating. If the Dash Cam is not used for an extended period of time the battery may become completely discharged which will cause the time and date on the device to default to the factory settings. If this occurs please completely recharge the Dash Cam before use. 12. FORMATTING THE SD CARD It is advisable to format the card weekly ...

If you need assistance setting up or have an issue regarding the use of your Xview product contact Xview Customer Support. Australian Agent TEL: 03 – 8587 8898 FAX: 03 – 8587 8866 Mon-Fri 9am – 5pm AEST Please retain this user guide for future reference. For more information, manuals, software or other products in the Xview range please go to our website.Xviewdrive.com.au This manual is considered correct at time of printing but is subject to change. For latest manuals and updates refer to the website. 14. SPECIFICATION Display: 3.0" High-resolution LCD touch s ...

2.2 Attach the mounting bracket to the Dash Cam by sliding the mount into the mounting slot of the Dash Cam 2.3 Check position of the Dash Cam before fixing the camera on the inside surface of the windshield. The area near the rear-view mirror is suggested. (See installation diagram). Make sure the windscreen is clean and free of debris. Use an Alcohol wipe to enhance adhesion. Remove the tape off the adhesive mount and adhere to the windshield holding in position for 60 seconds 2.4 Insert the Mini USB end of the GPS power cable into ...

Class 10 Micro SD card is required. 4 5 6 7 8 9 4) Mini USB input 5) Mounting Slot 6) Microphone 7) Reset hole 8) POWER Button 9) Micro SD Card Slot ...

Settings can only be accessed when not in recording mode 5.1 Video Resolution 5.2 Photo Resolution 5.3 Loop recording 5.4 Exposure 5.5 WiFi 5.6 Parking Monitor 5.7 G Sensor 5.8 Screen Save 5.9 Language 5.10 Beep Sound 5.11 Record Audio 5.12 Frequency 5.13 Delayed Power Off 5.14 GPS 5.15 Time Zone 5.16 Speed Unit 5.17 Daylight Saving 5.18 Date/Time 5.19 Format 5.20 Default Setting 5.21 Version ...