Xview XV20DVR Operation & User’s Manual

6.1 To use the GPS function, the GPS antenna module must be plugged into the Dash Cam. 6.2 For GPS data go into the settings menu on your Dash Cam App and turn GPS on. 6.3 This function is only valid when the external GPS module is connected. After the external GPS is connected, this function can be turned on to record, store and output data of the driving speed, time, mileage and other state information of the car. 6.4 When activated a GPS symbol will appear on the App screen and flash, until it receives a signal then it will turn green 6.5 The GPS data is automaticall ...

Car camera supports up to 64GB TF card, and Class 10 TF card is required. 1. Insert Micro SD card 2. INSTALLING THE DASH CAM 2. Mounting 2.1 Check the orientation of the Dash Cam camera first before installation. When the Dash Cam lens is facing outwards, the Hand Gesture Sensor faces down. 2.2 Use an Alcohol wipe to clean the windscreen and enhance adhesion. 2.3 Fix the Dash Cam on the inside surface of the windscreen by removing backing off 3M tape and press & hold firmly to windscreen for 60 seconds. The area near the rear-view mirror is suggested where t ...

view will be displayed at the top of the phone screen. Use this image to adjust the angle of the camera so that the lower part of the cameras view can see the end of the cars bonnet (about ¼ of its length) 5.5 To take a picture, press the white button in the lower centre of your screen 5.6 To access your Dash Cam videos, press the video camera icon in the lower centre of your screen 5.7 To access the Dash Cam’s settings, press the settings gear icon in the lower centre of your screen 5.8 To view your files via the APP, click on th ...

view will be displayed at the top of the phone screen. Use this image to adjust the angle of the camera so that the lower part of the cameras view can see the end of the cars bonnet (about ¼ of its length) 5.5 To take a picture, press the white button in the lower centre of your screen 5.6 To access your Dash Cam videos, press the video camera icon in the lower centre of your screen 5.7 To access the Dash Cam’s settings, press the settings gear icon in the lower centre of your screen 5.8 To view your files via the APP, click on th ...

5.1 Launch the ‘Xview XV20 or XV22’ Dash Cam APP to access functions. 5.2 Select “Connect to DVR” to enter the App. 5.3 App screen should look like image below. ...