WolfPack VIS-PHD1616 Manual 

1.1 Product Overview .......................................................................................................... 6 1.2 Features ............................................................................................................................ 6 1.3 Specification ................................................................................................................... 7 1.4 Connection Diagram .................................................................................................... 8 2 Hardware ..................................................................................................................................... 9 2.1 Front panel introduction ............................................................................................. 9 2.1.1 Display format on the LCD .................................................................................................... 10 2.1.2 Front panel operation. ............................................................................................................ 10 2.2Rear pannel introduction ............................................................................................ 11 3 Control Way ............................................................................................................................. 12 3.1 RS232 Control .............................................................................................................. 12 3.2 RJ45 TCP/IP Control .................................................................................................... 13 4 Software ................................................................................................................................. 15 4.1 Switch ............................................................................................................................. 15 4.2 Keyboard ........................................................................................................................... 16 4.3 Debug ................................................................................................................................ 17 4.4 demo .................................................................................................................................. 18 5 Command list ............................................................................................................................... 20 5.1 Switching command ................................................................................................... 20 5.2 Save and call status..................................................................................................... 20 5.3 Enquiry ........................................................................................................................... 21 6 Common Faults and Maintenance ................................................................................................ 22

please observe the following matters during the process of installation, use and maintenance: ◆Please do not use this product in the following places: the place of dust, soot and electric conductivity dust, corrosive gas, combustible gas; the place exposed to high temperature, condensation, wind and rain; the occasion of vibration and impact . Electric shock, fire, wrong operation can lead to damage and deterioration to the product, either; ◆In processing the screw holes and wiring, make sure that metal scraps and wire head will not fall into the shaft of controller, as it could cause a fire, fault, or incorrect operation; ◆When the installation work is over, it should be assured there is nothing on the ventilated face, including packaging items like dust paper. Otherwise this may cause a fire, fault, incorrect operation for the cooling is not free; ◆Should avoid wiring and inserting cable plug in charged state, otherwise it is easy to cause the shock, or electrical damage; ◆The installation and wiring should be strong and reliable, contact undesirable may lead to false action; ◆For a serious interference in applications, should choose shield cable as the high frequency signal input or output cable, so as to improve the anti-jamming ability of

◆Only after cutting down all external power source, can install, wiring operation begin, or it may cause electric shock or equipment damage; ◆This product grounds by the grounding wires .To avoid electric shocks, grounding wires and the earth must be linked together. Before the connection of input or output terminal, please make sure this product is correctly grounded; ◆Immediately remove all other things after the wiring installation. Please cover the terminals of the products cover before electrification so as to avoid cause electric shock. Matters needing attention during operation and maintenance: ◆Please do not touch terminals in a current state, or it may cause a shock, incorrect operation; ◆Please do cleaning and terminal tighten work after turning off the power supply. These operations can lead to electric shock in a current state; ◆Please do the connection or dismantle work of the communication signal cable , the expansion module cable or control unit cable after turning off the power supply, or it may cause damage to the equipment, incorrect operation; ◆Please do not dismantle the equipment, avoid damaging the internal electrical

program changes, commissioning, start and stop operation. Matters needing attention in discarding product: ◆Electrolytic explosion: the burning of electrolytic capacitor on circuit boards may lead to explosion; ◆Please collect and process according to the classification, do not put into life garbage; ◆Please process it as industrial waste, or according to the local environmental protection regulations.

1.1 Product Overview HDTV Supplys WolfPack HDTVVISPHD1616 HDMI matrix is a professional switcher that routes UHD 4Kx2KHDMI signals from 16 inputs to 16 outputs in need. It support 3D video, HDCP1.4, HDMI1.4 , 4K at 30Hz and 16 bit color. It include an RS232, TCP/IP and front panel control system. It can be widely used incommand control center, multi-screen systems, conference room, highdefinition medical or education teaching etc. 1.2 Features ◆High speed switching ◆Resolution is up to 4Kx2K at 30Hz. ◆Supports 3D video ◆Support HDMI 1.4. ◆Control is via the front panel and RS232 & TCP/IP. ◆EDID to fix any compatibility problems. ◆The firmware can be updated by the TCP/IP and be convenient for remote support and OEM the special features. ◆Input HDMI distance is up to 98 feet with 22 AWG HDMI cables

memory function, with power-off site protection; ◆ 2U standard housing with rack-mounting design 1.3 Specification Model VIS-PHD1616 Specification Input/output support 16 channels Input HDMI Output HDMI Control way Front panel,RS-232,TCP/IP Resolution Up to 4k x 2k（4096×2160 ） HDMI version HDMI 1.4，Support 3D TV HDCP Compliant to HDCP 1.4 Hot plug Yes Input cable Up to 30m(98 feet) Output cable Up to 15m (50 feet) HDMI input/output interface Type A, 19 pin, female Power supply 110~220 VAC Environment Storage and Work Temperature: -20°~+70°C; humidity:10%~90% Weight 7KG Consumption 20W Dimension(WxDxH) 2U（440mm x 333mm x 88mm） Warranty 1 year

(1) LCD display: Display the button inputs and switching status. (2) POWER： Power on/off indicator STATUS： The indicator is flashing, while the command is executing and. After the command is executed, the indicator is constantly on. (3) Number button 0 to 9 (4) Function buttons. Description as bellowing, AV Switching button to divide the input and output number ALL Switch the input to all output SAVE Save the current status and combine with number button LOAD Load the status and combine with number button CANCEL Cancel the operation ENTER Confirm the operation

I N OUT 123456789ABCDEFG 11111111111 1 1 11 1 As above picture, the every two number is a channel,IN mean input channel,OUT mean output channel.IN row will change according to the switching.The OUT row is fixed number. 2.1.2 Front panel operation. 1、one input to one output switch For example, input 3 switch to output 4,and we need to press the buttons as bellowing, “3”+“AV” + “4”+“ENTER”（LCD display as bellow picture）； I N OUT 123456789ABCDEFG 11131111111 1 1 11 1 2、one input to all output channel For example, switch input 2 to all output, we need to press the buttons as bellowing, “2”+“AV”+“ALL”+“ENTER”（LCD display as bellow picture） I N OUT 123456789ABCDEFG 22222222222 2 2 22 2 3、Save and Load the status Save the current input and output status, press the button as ： “number” + “SAVE”

Noted:The matrix can save 9 status(number is 1 to 9) 2.2Rear pannel introduction （1）Local RS232 loop out for daisy chain connection of multi matrix. （2）RS-232 serial port for control （3）TCP/IP control port （4）Reset button （5）Power supply jack （6）HDMI input （7）HDMI output

3.1 RS232 Control The matrix provides a standard RS232 serial port. The user can control the matrix by a PC or other controller. The matrix also provide the RS-232 loop out to transfer the command to other peripherals. Serial port default setting: Bit rate：9600，Data bit：8 bits，Stop bit：1，No parity bit RS232 IN port（Connect to the PC）PIN defined as bellowing, Pin Signal Statement 1 - - 2 TXD RS-232 protocol，PC send the data 3 RXD RS-232 protocol, PC receive data. 4 - - 5 GND Ground 6 - - 7 - - 8 - - 9 - - RS232 LOOP Port(connect to next matrix) pin defined as bellowing, Pin Signal Statement 1 - - 2 - - 3 RXD RS-232 protocol, PC receive data. 4 TXD RS-232 protocol，PC send the data 5 GND Ground 6 - - 7 - - 8 - - 9 - -

finished, you can control the matrix with the instructions we provided in the following chapter. 3.2 RJ45 TCP/IP Control The network port is based on the TCP/IP Network communication protocol and apply the remote control by Ethernet. The remote user can control the local equipment by Ethernet. TCP/IP port default setting: Port no. 1030 IP add. 192.168.0.188 （Static IP; While connecting to routing, the matrix get the dynamic IP. ） Subnet Mask 255.255.255.0 Gateway 192.168.0.1 RJ45 two connection ways 1） Cross-wire connection Directly connect the matrix to host computer by using Cat5/5e cross-wire. 2） Straight wire connection Connect the matrix to router or switch by using Cat5/5e straight link wire.

each end of the line is fixed with the RJ-45 connector (commonly known as the crystal head). The standard line order is not random, the purpose is to ensure the symmetry of the cable connector layout, so that the interference between the cable and the cable can be offset. Generally, Cat5/5e cable has four twisted pairs which are marked by different colors. EIA/TIA 568B and EIA/TIA 568A standard: EIA/TIA 568B and EIA/TIA 568A standard: T568A standard 1 2 3 4 5 6 7 8 white green green white orange blue white blue oran ge white brow n brow n T568B standard 1 2 3 4 5 6 7 8 white orang e oran ge white green blue white blue green white brow n brow n Straight wire connection: both ends use T568B standard. Cross-wire connection: one end use T568A standard, one end use T568B standard.

(2)Connect to the matrix switcher by TCP/IP (3)Select your operation, "AV" means switching audio and video "Video" means switching video "Audio" means switching audio "EDID" means read the EDID from input to output (4)Display executing the command (5) Input channel number (6 )Output channel number (7)Press the button to switch/EDID from input to output For example, We switch audio/video from input 8 to output 4. Then we select the and press the button as bellowing picture. The video & audio will switch from input 8 to output 4,as the command .

(1) Select your operation "Video","AV","Audio", press input(Up zone) and outputs(down

MATRIX" to confirm/cancel reboot the matrix switcher. (2)Select the operation "All" and press the button number N ("1" to "16") to switch the input N to all output. Select the operation "THROUGH" and press the button number N ("1" to "16") to switch the input N to corresponding output N. Select the operation "CLOSE" and press the button number N ("1" to "16") to output N. (3) Select the operation "LOAD" and press the button number N ("1" to "9") to switch the preset status N. Select the operation "SAVE" and press the button number N ("1" to "9") to save the current status to preset status N. 4.3 Debug Use to send the command directly to the matrix and you can set the "Auto" sending for debug the matrix.

As above picture, "Start" is the input start channel, "End" is the input end channel. "Current Channel" means the current switching executing input channel.

channel. "Current Channel" means the current switching output channel. Click "start demo" ,the switching operation run one input to one output. from input "START" to output channel "START" ,delay time, next output, delay time, until the "END" output .… from input "END" to output channel "END" ,delay time, next output, delay time, until the "END" output

5.1 Switching command 1.One input to one output switch PC TO Matrix Function Matrix to PC Sample [X1]V[Y1]. 1 video input [X1] switch to output [Y1] V:[X1]->[Y1]! 1V1. [X1]V#. 1 video input [X1] switch to corresponding output [Y1] [X1] V Through! 1V#. [X1]#. 1 video and audio input [X1] switch to corresponding output [Y1] [X1] A/V Through! 1#. 2. Multi input/output switch PC TO Matrix Function Matrix to PC Sample [X1]V[Y1],[Y2]. Video input [X1] switch to output [Y1], [Y2], [Y3],~[Yn]. V:[X1]->[Y1],[Y2] ! 1V1,2,3. [X1]All. Audio & video input [X1] switch to all outputs [X1]A/V TO All! 1All. AllV#. All video channel input [X1], [X2]~ [Xn] switch to corresponding output[Y1], [Y2]~ [Yn] All V Through! AllV#. All#. All video & audio channel input [X1], [X2]~ [Xn] switch to corresponding output[Y1], [Y2]~ [Yn] All A/V Through! All#. [X1],[X2]V#. Video input [X1],[X2] switching corresponding output [Y1],[Y2] [X1],[X2] V Through! 1,2,3V#. [X1],[X2]#. Video & Audio input [X1],[X2] switching corresponding output [Y1],[Y2] [X1],[X2] A/V Through! 1,2,3#. 5.2 Save and call status PC TO Matrix Function Matrix to PC Sample Save[N]. Save the current input/output status to number N preset Save To F[N]! Save1. Load[N]. Load the number N preset status to switch Load From F[N]! Load1.

Function Matrix to PC Sample Status[Y1]. Enquiry 1 channel audio & video status V:[X1]->[X2]！ Status1. Status. Enquiry all channel audio & video status V:[X1]->[X2]！ …… Status.

1. Signal interference: the power supply must be connected to the power protection ground, and to ensure that the input and output devices with the same power protection ground. For the use of computer communication control users must ensure that the computer used and the device are connected to the power protection, and the same protection. 2. The serial port can not control the device: check the control software set the communication port is connected with the serial port corresponding to the device; check the computer's communication port is good. 3. There is no corresponding image output when this unit is switched: (1) Check whether the corresponding input signal. (Available oscilloscope or multi-meter to detect) If there is no signal input, it may be broken or loose input connector, replace the cable if the HDMI cable is too long and replace with HDMI extenders over CAT5. (2) Check whether the corresponding output signal. (Available oscilloscope or multi-meter todetect) If there is no signal output, there may be broken output connector or connector loose,replace the cable can be the HDMI cable is too long lead to no signal output, can replace the shortcable. 4. Check the equipment power supply grounding it has a good ground. 5. The LCD screen is not ON and the button operation No response: the power supply may be bad so call us.