Winners Only DQT13678 Assembly Instructions

PARTS LIST PART NO FIGURE DESCRIPTION Q'TY Hardware Bag Table Top Trestle Leaf Hinge Mounting Plate Glides Support Leaf Leg Stretcher Table Look Apron Leaf Apron Hinge Support Leaf Hinge DQT13678-01 DQT13678-13 DQT13678-15 DQT13678-02 DQT13678-05 DQT13678-09 DQT13678-10 DQT13678-12 DQT13678-17 DQT13678-18 DQT13678-20 DQT13678-21 1 pce 1 pce 2 pcs 4 pcs 2 pcs 3 pcs 4 pcs 2 pcs 1 pce 2 pcs 2 pcs 1 pce MADE IN MALAYSIA PAGE 1 OF 3 TBSR-11396EF-UNNM DQT13678 DQT13678-13 DQT13678-15 DQT13678-20 DQT13678-21

HARDWARE PART: NOTE: THE UNIT SHOULD BE ASSEMBLED BY 2 OR MORE PEOPLE. 4 pcs Allen Key 1 pc Wrench 1 pc Nut 4 pcs Lock Washer 8 pcs Flat Washer 4 pcs JCBB Bolt 4 pcs Flat Washer ASSEMBLY : (Small) (Large) STEP 1 Attach stretcher to the trestle base by inserting the wood dowels into the pre-drilled holes on the trestle base. Insert JCBB Bolt throught Lock Washer, Flat Washer (Small) and pre-drilled holes of trestle base into the pre-drilled holes at the end of the stretcher. Tighten the bolts with the supplied Allen Key. Attach Cover Piece to cover the holes. STEP 2 Position the table top upside down on a smooth. Protective surface such as carpet. REMOVE AND DISCARD THE TEMPORARY WOOD STRIP. STEP 3 Unlock the metal catches underneath the table and pull the table top wide open equally from both ends. Align and attach the table top to the Trestle Base put a Flat Washer (Large), Lock Washer and Nut onto the hanger bolt. Tighten all Nuts with the provided Wrench. MADE IN MALAYSIA PAGE 2 OF 3 TBSR-11396EF-UNNM Trestle Base Wood Dowel Leg Stretcher Base Assembly Allen Key JCBB Bolt Flat Washer (Small) Lock Washer DQT13678 CARE INSTRUCTION ~ Be sure to use the same type of polish consistenly. Your furniture will appear cloudy or streaky if oil based or wax based polishes are interchanged. ~ Spray your furniture surface evenly. Wipe in a circular motion with a soft clean cloth. Remove Wood Strip Table Top Wrench Nut Lock Washer Flat Washer (Large) Unlock Metal Catches Cover Piece Hanger Bolt

STEP 5 Push table top from both ends to close gap and lock the metal catches underneath the table. Adjust the level glides until the table sits firmly. TO STORE THE CENTER LEAF WHEN NOT IN USE Unlock the metal catches underneath the table and pull the table top wide open equally from both ends. Flip down the aprons and fold the center leaf to store within the compartment. Push table top from both ends to close. Lock the metal catches underneath the table. MADE IN MALAYSIA PAGE 3 OF 3 TBSR-11396EF-UNNM DQT13678 Unlock Metal Catches Flip up apron Flip down Apron SOLID TOP BUTTERFLY COUNTER HEIGHT WITH X BASE TABLE Lock Metal Catches Lock Metal Catches Level Glide