Whirlwind H7 Manual 

Table of Contents 1. Principle to Self-Balancing HoverKart ............................................................................................. 3 2. Assembly Instructions ........................................................................................................................... 4 3. How to Use ............................................................................................................................................... 10 4. Technical Parameters .......................................................................................................................... 15

1. Principle to Self-Balancing HoverKart The Hoverkart combines the traditional Hoverboard with a metal frame seat component, enabling users to race around on their Hoverboard as if in a Go-Kart. It needs to be treated as a fast-moving electric vehicle and first time users must use it with caution until they feel comfortable operating it. ***WARNING*** THE PRODUCT MUST BE USED WITH CAUTION AND IN AN OPEN SPACE TO PREVENT CAUSING DAMAGE TO YOURSELF AND OTHERS. YOU MUST WEAR A HELMET, ELBOW PADS AND KNEE PADS WHEN USING. ONLY USE ON PRIVATE LAND. IT IS A FAST-ACCELARATING PRODUCT AND SHOULD BE USED RESPONSIBLY. WE WILL NOT BE LIABLE TO ANY INJURIES OR ACCIDENTS CAUSED THROUGH THE USE OF THE HOVERKART H7. ***WARNING*** Follow the User Manual to drive the HoverKart safely. We highly advise you to read the Manual carefully at the first time. Before driving, make sure that the tires are in good condition and there are no loose parts. Please use the product sensibly otherwise you risk personal injury and property loss. Please do not modify its components by yourself.

2. Assembly Instructions 2.1 Parts: 1 X Allen Key 1 X Spanner 5 X 45mm Bolts 9 X Anti-Slip Nut 4 X Screws 2 X Velcro Straps (Use image as a reference only – quantities are different from image shown) 1 X HoverBoard

1 X Seat 1 X Front Panel 1 X Wheel 1 X Nob 2 X Handle 1 X Main Frame 2 X HoverBoard Bracket

2.2 Assembly 1. Connect each Handle’s to the HoverBoard Bracket on the Main Frame. a) To do this, use 2 X 45mm Bolt and 2 X Anti- Slip Nut for each Handle. b) Align the 2 holes located on the bottom of the Handle with the corresponding 2 holes found on the HoverBoard Bracket and insert the 2 X 45mm Bolt and fasten with the 2 X Anti-Slip Nut using an Allen Key. c) Repeat this process for the other Handle. 2. Connect the Rear Stabilizer Wheel to the Main Frame a) To do this, insert the Rear Stabilizer Wheel onto the rear tube of the Main Frame. b) Make sure both parts are aligned so that you can insert the large black 44mm Bolt through the hole of the tube and tighten with an Anti-Slip nut using an Allen Key.

3. Connect the Seat to the Main Frame a) To do this, use 4 X Screw and 4 X Anti-Slip Nut b) Align each Screw with the corresponding hole in the Seat. c) Using an Allen Key, reach under the Seat to fasten each Screw with an Anti-Slip Nut. 4. Connect the Front Panel to the Main Frame a) To do this, use 1 X Nob b) Insert 1 X Nob into the hole in the Main Panel and tighten it by turning it to the Right. c) Align the Front Panel tube and the Main Panel tube and while pulling the Nob upwards, slide the Front Panel Tube into the Main Panel Tube. d) Release the Nob into a selected hole – the hole chosen will determine the Length of the HoverKart and this can be adjusted by selecting any of the other holes in the Front Panel.

5. Connect the Main Frame to the HoverBoard. a) To do this, use the Velcro Straps supplied. b) Place the Main Frame (now connected to the Front Panel) on the HoverBoard, so that you align the HoverBoard Bracket with the width of the HoverBoard. c) Once the above is aligned correctly, tighten the bolts on the HoverBoard Bracket to ensure that the HoverBoard does not move from side to side. d) Lastly, attach the Straps by feeding each Strap through the corresponding hole in the HoverBoard Bracket, passing underneath the HoverBoard and tighten using the Velcro on each Strap. 6. Make sure all parts are secured tightly and are not going to move around during use a) Make sure you test each part is secured before use.

3. How to Use 3.1 Starting To start using the HoverKart, simply sit down onto the seat and place both feet on the footrest at the end of the Front Panel. Lift both handle’s to the Neutral centre position as shown before starting the HoverKart. We recommend Turning on the HoverKart when sitting down to make it easier to maintain control. The device will ‘self-adjust’ – meaning that it will make sure that both foot panels on the HoverBoard are level before giving control to the user. Try to keep both handles as still as possible on your first attempt to avoid any sudden movements from the HoverKart. Remember that the more relaxed your body is; the easier it will be. Please avoid drastic shakes or an abrupt shift in your centre of gravity. Stay still and make slow and gradual movements until you feel more confident.

3.2 Accelerating And Braking Moving in a Straight Line: To go forward, very slowly push both handles in a forward motion. Make sure to use very stable and gentle movements, as the HoverKart is sensitive to sudden movements and will accelerate quickly. Practice slowly moving forwards and stopping in a small space until you feel comfortable moving to more advanced steps. Similarly, to brake and reverse gently pull both handles back towards you. To brake the HoverKart, simply pull or push the handles back to their neutral center position. Be careful not to brake too suddenly as your momentum will shift our center of gravity and can disrupt your control of the Kart. Make sure you evaluate your surroundings and determine whether or not it is safe for you to reverse before doing so. Always look behind you when reversing so that you can see where you are going and avoid accidents.

3.3 Turning Turning on one spot: To turn on the spot to the right, keep the left handle stable and still and push the right handle forward slowly. To turn to the right while moving forwards, slowly start pushing the left handle forwards whilst continuing to keep the right handle slightly further ahead. The angle of rotation depends on how much further ahead the right handle is compared to the left handle. Similarly, to turn on the spot going left, keep the right handle stable and still and push the left handle forward slowly. To turn left while moving forwards, use the same theory as above but swap the right and left handle around. Slowly and gently practice going in small circles until you become confident – while making sure you don’t become to disorientated to avoid an accident.

Turning while reversing: To turn to the right when reversing, pull the right handle slowly towards yourself. This will cause the HoverKart to spin on one spot until you restore both handles to the neutral central position. The faster and further you pull back the handle, the faster and more responsive the HoverKart will be to turning. As with al reversing, make sure you look behind you before attempting the manoeuvre and make sure there are no obstructions in your way before doing so. Please proceed with caution. Make sure you practice turning backwards on one spot and that you are comfortable doing so, before moving on to the next step.