Watchguard AP225W Quick Start Manual

WatchGuard® AP AP225W HW Model: W-118 Mounting Bracket 2x 2x 2x 2x (客戶):Watchguard (材質):50# 白色特多龍 (空白LABEL 料號):50900006072D (顏色):BLACK (上光方式):NO (尺寸):32x18mm (公差):+-0.5mm 2:1 SN:22APXXXXX-XXXX Ethernet MAC Addr: 00:01:21:XX:XX:XX 00:01:21:XX:XX:XX 請使用客戶提供的Excel: S/N:內容由客戶提供 條碼高度:4.5MM CODE 39 文字顯示為:SN: 22APXXXXX-XXXX 條碼顯示為:22APXXXXXXXXX 條碼顯示為:000121XXXXXX 請使用客戶提供的Excel ACTIVATE YOUR AP GO TO: watchguard.com/activate INSTALL THE MOUNTING BRACKET Type 2 OR Type 3 CONNECT THE AP MOUNT THE AP Type 4 Align slots and slide AP onto bracket 4 3 2 1 Type 1 Type 2 Type 3 Type 4 Type 1

U.S. SALES: 1.800.734.9905 • INTERNATIONAL SALES: +1.206.613.0895 WEB: www.watchguard.com © 2020 WatchGuard Technologies, Inc. All rights reserved. WatchGuard, the WatchGuard Logo, Fireware, and LiveSecurity are registered trademarks of WatchGuard Technologies, Inc. in the United States and/or other countries. All other trademarks and tradenames are the property of their respective owners. P.N. 352-4225-001 Rev B 022420 1.877.232.3531 (U.S. and Canada) WATCHGUARD TECHNICAL SUPPORT +1.206.613.0456 (all other countries) www.watchguard.com/support REAR PANEL BOTTOM PANEL PASS-THROUGH POE In LAN/Uplink Power Off: Powered off Green: Powered on Flashing: Cannot connect to Wi-Fi Cloud or controller Flashing: No IP address received from DHCP 2.4GHz, 5GHz, and Third Radio Off: Wireless radio inactive Green: Wireless radio active Uplink LAN/PoE IN Off: No Ethernet link Green: Connected to the network LAN Interfaces Off: LAN interface disabled Green: LAN interface enabled CHECK AP STATUS NOTICES: All WatchGuard products are designed and tested to meet strict safety requirements. These requirements include product safety approvals and other global compliance standards. Please read these instructions carefully before operating the product, and refer to them as needed to ensure the continued safe operation of your product. Additional information, including a full list of safety approvals, global compliance standards, and certifications can be found in the Hardware Guide for this device located on the WatchGuard website: https://www.watchguard.com/wgrd-help/documentation/hardware-guides For patent information, please visit http://www.watchguard.com/patents Safety Warning If protective earthing is used as a safeguard, the instructions shall require connection of the equipment protective earthing conductor to the installation protective earthing conductor (for example, by means of a power cord connected to a socket-outlet with earthing connection). To meet safety and electromagnetic interference (EMI) requirements, you must make sure the power source is connected to earth ground before you connect power to the AP. Power Adapter Requirements This product is intended to be supplied by a Listed Power Adapter or DC power source marked “L.P.S.” (or Limited Power Source or PS2) rated 12V DC, 2A minimum, maximum ambient temperature (Tma)=40°C, or supplied by a Listed PoE Adapter marked “L.P.S.” (or Limited Power Source or PS2) rated 54V DC, 0.6A minimum, maximum ambient temperature (Tma)=40°C. For more information regarding approved power sources, please contact WatchGuard Technologies. POWER REQUIREMENTS • PoE 802.3af/at (54V DC, 0.6A) • Optional DC power adapter (12V, 2A) The AP must be connected to PoE+ (802.3at) or DC power to enable power on the LAN3/PoE Out port. CONFIGURE THE AP 6 Manage APs with WatchGuard Wi-Fi Cloud Manage APs with your WatchGuard Firebox (Fireware v12.5.3 or higher) GO TO: watchguard.com/start Declaration of Conformity WatchGuard Technologies Inc. hereby declares that the product(s) listed below conform to the European Union directives and standards identified in this declaration. Product (s): 802.11 a/b/g/n/ac Access Point, W-118 EU Directive(s): Low Voltage (2014/35/EU) Electromagnetic Compatibility (2014/30/EU) Energy-related Products (2009/125/EC) RoHS (2011/65/EU and 2015/863/EU RoHS) WEEE Directive 2012/19/EU The Radio Equipment Directive (2014/53/EU) Common Standard(s): EN 60950-1:2006+A11+A1+A12+A2:2013 Safety for ITE EN 55024:2010 Immunity for ITE EN 55032:2015/AC:2016 EN 62311:2008 EN 61000-3-2:2014 Harmonics EN 61000-3-3:2013 Flicker Wireless Standard(s): EN 301 489-01 v2.1.1 EMC and Radio Spectrum Matters EN 301 489-17 v3.1.1 EMC and Radio Spectrum Matters EN 300 328 v2.1.1 Radio Spectrum Matters EN 301 893 v2.1.1 Broadband Radio Access Networks This device complies with Directive 2014/53/EU issued by the Commission of the European Community. Manufacturer / Hersteller: WatchGuard Technologies 505 5th Ave S. Suite 500, Seattle, WA 98104 USA Radio Equipment / Funkanlage: 802.11 a/b/g/n/ac Access Point Type Designation / Typenbezeichnung: W-118 Specifications / Technische Daten: 802.11a,b,g,n,ac (2.4Ghz & 5GHz) Intended Purpose / Verwendungszweck: Indoor access point Equipment Class / Betriebsmittel der Klasse: Class II Operating temperature 0° C to 40° C The above device complies with the essential requirements and other relevant provisions to Directive 2014/53/EU when used for its intended purpose. This equipment may be operated in the USA, Canada, & Europe Union. Warning! This is a Class B product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. Frequency range (MHz) Max. Transmit Power (W) Bluetooth 0.00794 WLAN Wi-FI 802.11x; 2, 4 GHz 0.09977 WLAN Wi-FI 802.11x; 5 GHz 0.19907 Restrictions: France (i) les dispositifs fonctionnant dans la bande 5150-5250 MHz sont réservés uniquement pour une utilisation à l’intérieur afin de réduire les risques de brouillage préjudiciable aux systèmes de satellites mobiles utilisant les mêmes canaux; (ii) De plus, les utilisateurs devraient aussi être avisés que les utilisateurs de radars de haute puissance sont désignés utilisateurs principaux (c.-à-d., qu’ils ont la priorité) pour les bandes 5 250-5 350 MHz et 5 650-5 850 MHz et que ces radars pourraient causer du brouillage et/ou des dommages aux dispositifs LAN-EL. Die oben genannten Gerät entspricht den grundlegenden Anforderungen und anderen relevanten Bestimmungen der Richtlinie 2014/53/EU, wenn für den vorgesehenen Zweck verwendet werden. Dieses Gerät ist für die Verwendung in den USA, Kanada, and Europäische Union. Warnung! Dies ist eine Einrichtung der Klasse B. Diese Einrichtung kann im Wohnbereich Funkstörungen verursachen. In diesem Fall kann vom Betreiber verlangt werden, angemessene Maßnahmen durchzuführen Einschränkungen: Frankreich –(i)-Geräte, die im Band 5150-5250 MHz ist nur für den Innenbereich, um das Risiko von Störungen des mobilen Satelliten-Systeme, die die gleichen Kanäle (ii) Darüber hinaus reduzieren vorbehalten, sollten Benutzer auch darauf hingewiesen werden, dass die Nutzer von Hochleistungs-Radare bezeichnet werden primäre Benutzer (dh d. sie haben Priorität) der Bänder 5 250-5 350 MHz und 5 650-5 850 MHz und dass diese Radargeräte können Störungen und / oder Schäden an LE-LAN-Geräten verursachen. Signature Full Name: Laurence Huang Position: Manufacturing Program Manager Date: Nov 16, 2019 LAN3 PoE Out Pass- Through DC IN LAN2 LAN1 Reset 5 Power Options WG8602 (AU), WG8601 (UK), WG8600 (EU), WG8599 (US) WatchGuard 802.3at PoE+ Injector with AC cord WG9009 12V Power Adapter for WatchGuard AP225W