truMedic InstaShiatsu + MC-4500 Instruction Manual

Specifications

Brand: truMedic
Category: Massager
Model: InstaShiatsu + MC-4500 (Instruction Manual)
File Type: PDF
File Size: —
Pages: 21

Read Online

Read the truMedic InstaShiatsu + MC-4500 Instruction Manual online using the built-in PDF viewer.

Text of the manual

Operating Your Massage Chair

11 Understanding Your Massage Chair 12 Installation Guide 18 Using the Remote Controller 28 The LCD Screen 30 Cleaning and Maintenance 34 Troubleshooting 35 Warranty Information 36 Product Specifications 38 TABLE OF CONTENTS ENGLISH

Read all instructions before using this household appliance

When using an electrical appliance, basic precautions should always be followed, including the following: DANGER To reduce the risk of electric shock: • Always unplug this appliance from the electrical outlet immediately after using and before cleaning. • Do not reach for an appliance that has fallen into water. Unplug immediately. • Do not use while bathing or in a shower. • Do not place or store appliance where it can fall or be pulled into a tub or sink. Do not place in or drop into water or other liquid. WARNING To reduce the risk of burns, fire, electric shock, or injury to persons: • An appliance should never be left unattended when plugged in. Unplug from outlet when not in use, and before putting on or taking off parts. • Do not operate under blanket or pillow. Excessive heating can occur and cause fire, electric shock, or injury to persons. • Close supervision is necessary when this appliance is used by, on, or near children, invalids, or disabled persons. • Use this appliance only for its intended use as described in this manual. Do not use attachments not recommended by the manufacturer. • Never operate this appliance if it has a damaged cord or plug, if it is not working properly, if it has been dropped or damaged, or dropped into water. Return the appliance to a service center for examination and repair. • Temperatures sufficiently high to cause burns may occur regardless of the control setting. • Do not use on an infant or invalid or on a sleeping or unconscious person. • Do not use on insensitive skin or on a person with poor blood circulation. Check the skin in contact with the heated area of the appliance frequently to reduce the risk of blistering. • Do not carry this appliance by supply cord or use cord as a handle. 5 Welcome to your new truMedic® MC-4500 Massage Chair! Before using, please review the following instructions for safety and the best operating experience. Throughout this guide, we’ll use several symbols that contain important information. To reduce risk of personal injury, fire, and shock, please review all these items carefully. Save this booklet for future use and reference. If you see this symbol, the accompanying language will describe a warning for serious bodily injury or death. The caution symbol denotes something that may cause an injury or property damage. Avoid engaging in the listed behaviors associated with this symbol. Do not disassemble any part on your chair featuring this symbol. Doing so may increase the risk of harm or void any accompanying warranty. You must adhere to these guidelines when operating your new massage chair. This symbol will provide directions on how to use a particular cable during assembly and use. This chair is not waterproof, avoid contact with any liquids. This symbol denotes any fire or environmental hazards. IMPORTANT SAFEGUARDS

Warnings and Notes of Caution

Notes on User disassembly and Maintenance • Contact a professional if your chair experiences water damage or begins to function improperly. Do not modify, disassemble, or perform unspecified maintenance. • Do not attempt to repair or replace a damaged power cord or plug. Contact the service team at truMedic® or a professional dealer to receive a replacement. • Do not remove or open any part of the chair for any reason. • Contact a professional for repair if you notice any irregularities or damage in the cloth and partial leather coverings on your massage chair. CAUTION Avoiding Falls • Always operate your chair on a flat and even surface. Preventing Wall and Chair Damage • Always place the chair at least 15 inches from all walls to allow for proper positioning. Avoiding Injuries Associated With Excessive Use • The maximum recommended massage time is 20 minutes. Try to change massage settings and positions every 5 minutes for best results. Failing to change positions frequently could result in discomfort. Avoiding Accidents and Injuries • Fully insert the plug into the outlet before turning the chair ON. • Turn off all controls before unplugging the chair. Avoiding Electrocution • Look for cord and wire damage before using the massage chair. • Follow all instructions for proper ground wire connectivity. The wire should not have any irregularities. Avoid Using The MC-4500 if you belong to any of the following groups: • Those with osteoporosis. • Those who have a pacemaker implant or other electrical medical implant. • Those who are pregnant or in poor health should discuss use with a physician. • Children under the age of 12. • Anyone under the influence of alcohol or recreational drugs. Accident and injury warnings • Do not allow children, pets, or any objects in or around the chair while it is in an adjusted position or in operation. • Close supervision is necessary while operating the chair by, on or near children, invalids or disabled persons. • Immediately discontinue use and speak with a medical professional if you experience any strange or disorienting symptoms during use. • Do not sleep in the chair. • Do not sit or stand on the armrests. • Avoid excessively targeting any one area of the body to reduce the risk of injury. • Closely monitor any user who suffers from mobility difficulties. Fire and electrocution warnings • Always insert the plug into an appropriate power outlet. • Never leave a plug sticking partly out of an outlet. • Always turn off and unplug the chair when it is not in use or before cleaning. Fire and electrocution avoidance • Do not use a plug, cord, or outlet if you identify a poor or broken contact. • Only use power sources that support the recommended voltage to reduce the risk of fire or electric shock. • Do not use any damaged, twisted, knotted, or constricted power cords. Accident avoidance • Do not fold massage chair cushions if you plan to store the chair. • Do not run this massage chair for long, uninterrupted periods. Follow all run-time recommendations listed in this manual.

• Always turn OFF and unplug your chair after a massaging session.

• Always turn the chair off and unplug your chair during electrical outages. Avoiding Accidents and Injuries • Do not place your hands or feet in between gaps in the massage heads. • Do not put your hands or feet in between spaces in mechanical components. • Do not drop or purposefully insert objects into the massage chair slot. • Do not sit, stand, or place heavy objects on chair components, including the armrests and backrest. • Never stand on the chair. • Do not attempt to move a chair white it’s operating. • Do not use massage areas for unintended body parts. • Do not put unusual amounts of pressure on the backrest while the chair is reclined. • Do not use chair in loose clothing or wearing jewelry. Keep long hair away from mechanical components of the chair. • Avoid using the chair with exposed skin or while wearing sheer fabrics. Using the chair with improper clothing could lead to skin irritation. • Empty your pockets before sitting in the chair. Avoiding Chair Damage, Discoloration, and Deterioration • Do not place the chair in humid or wet environments, around sharp things, or near heat sources, including stoves. • Never use an electric heating pad, blanket, or other heated device while using the chair. • Do not use the chair in high-temperature areas. • Do not use the chair in an outdoor environment. Avoiding Leaks and The Potential for Electrocution Injuries • Do not use or store your chair in a wet, humid, or exposed environment such as a swimming pool area or bathroom. • Both the chair and the remote controller must remain dry at all times. • Do not sit in the chair with wet or damp clothes. Avoiding electrocution Injuries • Follow all directions for installing the ground wire or contact a professional electrician for assistance. • Never use a plug adapter. Contact a professional electrician if you do not have the appropriate outlet for installation. Avoiding Electrocution Injuries or Fire • Unplug the chair before cleaning. • Unplug the chair if you notice any power damage or the potential for power- related damage (i.e., during thunderstorms). • To unplug the chair, firmly grasp the plug (not the cord) to release the prongs from the outlet. FCC Statement NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help.

Operating Your Massage Chair

Please read all the following instructions to ensure safe and effective operation of your MC-4500 massage chair. Turning On and Operating Your Chair 1. Insert the A/C power cord into the chair through the DC jack found on the back of the MC-4500. 2. Insert the power cord into an approved socket. 3. Turn the MC-4500 on using the power switch found next to the DC jack on the back of the chair, then power on the unit using the remote controller. 4. To begin a massage session, use the remote controller to activate your desired settings. Learn more about these options in the Remote Controller Usage Guide on page 28. OPERATING YOUR MASSAGE CHAIR Introduction Thank you for purchasing a truMedic® MC-4500 Massage Chair. Please read this instruction manual carefully so you may learn how to properly use the chair before using it. Make sure to pay close attention to the important safety warnings, and keep this manual handy for future use. truMedic® reserves the right to change the design specifications of the MC-4500 without notice. Features and Function • Combined with 4D massage technology, this massage chair comes equipped with functions such as kneading, tapping, shiatsu, and knocking, imitating the feeling of human hands for an immersive relaxation experience. • Upholstered with Leather Touch, meaning that there is partial leather on the seat, backrest, armrests, and footrest. • Heat therapy on neck, shoulder, waist, and buttocks. • L-track rollers extend from the neck to beneath thighs for a full body massage experience. • Micro space forward sliding function enables users to place the massage chair close to the wall. • One-touch zero-gravity mode relieves all pressure on the spine to mimic the feeling of weighlessness. • Intuitive LCD remote controller enables you to customize your massage at the push of a button. • Combination of rollers, airbags, and heat in the footrest. • Fatigue relieving waist and hip airbags • Footrest extends 8.6 in to make the chair suitable for people of different heights INTRODUCTION Warnings and Attention About Operation • If you notice damage to the chair, please discontinue use and contact [email protected]. • To reduce risk of injury, only use in a socket with approved voltage.

1. Head Cushion

2. Right Shoulder Massager 3. Back Cushion Understanding Your Massage Chair Take the time to review the graphics available below and familiarize yourself with the distinctive parts of your new massage chair. As soon as you unbox your chair, use the components listing to verify that you have all necessary parts. Contact truMedic® at [email protected] if you are missing any pieces. UNDERSTANDING YOUR MASSAGE CHAIR 4. Right Armrest 5. USB Charging Port 6. Seat 7. Leg Rest 8. Foot Rest 9. Left Armrest 10. Left Shoulder Massager 14. Castor 15. Power Case A. Controller Cord Socket B. Fuse Box C. ON/OFF Switch 11. Remote Controller 12. Remote Control Pouch 13. Backrest A B C

UNDERSTANDING YOUR MASSAGE CHAIR

1. Headrest Massage Rollers 2. Shoulder Airbags 3. Waist Airbags 4. Armrest Airbags 5. Side Hip Airbags 6. Side Leg Airbags 7. Calf Airbags 8. Footrest Airbags 9. Foot Heating Plate 10. Foot Massage Rollers Mechanical Components List

Mechanical Components List (Cont.)

1. Remote Controller 1 2. Right Armrest Assembly 1 3. Massage Machine 1 4. Power Case Assembly 1 5. Left Side Fender 1 6. Right Armrest Frame Assembly 1 7. Under Frame Assembly 1 8. Seat Electric Actuator 1 9. Backrest Electric Actuator 1 10. Right Side Fender 1 11. Foot and Leg Assembly 1 12. Left Armrest Assembly 1 13. Left Armrest Frame Assembly 1 14. Footrest Electric Actuator 1 15. Seat Frame Surface Assembly 1 16. Seat Bottom Frame Assembly 1 17. Pillow 1 18. Shoulder Pad 1 19. Back and Seat Cushion 1 20. Backrest Assembly 1 21. Shoulder Device Assembly 1 22. Back Cover Assembly 1 UNDERSTANDING YOUR MASSAGE CHAIR INSTALLATION GUIDE Installation Guide You now have all the knowledge you need to start installing and using your luxury MC-4500 Massage Chair. This section features a step-by-step guide to unboxing and setting up your chair. Follow the instructions closely, as this product contains several important components. 24 in 4 in Before Installation • Make sure the location of where you decide to install the MC-4500 has enough space for it to recline and extend. • Placing the massage chair on a wooden floor may cause damage due to its weight. Try to place the chair on a carpet or other type of flooring to avoid this. • Place the chair on a flat surface to keep it upright and avoid potential damage. • Don’t use the chair in wet places, like the bathroom, to avoid potential leakage or electric shock. • Don’t use near a stove, under sunlight, or near any heat source to prevent the upholstery from deteriorating

L/R Lower Armrest Cover

Controller Pouch Backrest Cushion Power Cord A. Take out the main body and accessories from the box. Use at least 3 people to assist in moving the parts. To easily remove the main body from the box, have two people grasp the left and right metal frames on the seat while the last person is holding the backrest. STEP 1: Unbox The Chair STEP 2: Assembling the Leg Rest B. Take both armrests out of the box and place them on a flat surface. C. Take the leg rest out of the box and place it on a flat surface. A. Unscrew the bolt from the leg rest mount. INSTALLATION GUIDE

Back of the Leg Rest

Air Tube and Cable Plug Air Tubes and Cable Plug (Located on the Seat) B. Insert the air hose and cable plug from the leg rest into the sockets on the massage chair main body. INSTALLATION GUIDE C. Connect the air hose and cable plug into the available sockets on the chair. D. Raise the leg rest and rest it onto the mounts found on the front of the MC-4500 then fasten with the previously removed screw. Attach the velcro strap found underneath the flap near the top of the leg rest to the main body of the chair. STEP 3: Assembling the Armrests

Air Hose and Cable Sockets

(The left armrest does not have a cable socket) Rubber Plug (Covers screw used for securing attachment) Inner Plate INSTALLATION GUIDE A. Lift the armrest onto the side frame of the main body, then slide the frame into the inner plate of the armrest. Insert the mounting brackets into the holes found in the shoulder frame. B. Connect the cable plug on the seat into the armrest. Then insert the air hoses into the holes marked “1” and “2” (Hole 3 will remain open). C. Attach the lower armrest cover to the bottom of the armrest by snapping it into place. D. Then secure the chair by removing the rubber plug and screwing the armrest into the frame. Reinsert the rubber plug after securing the armrest. Holes on the Shoulder Frame Air Hoses and Cable Plug (Located on Armrest)

STEP 4: Attach the Accessories

INSTALLATION GUIDE A. Attach the remote control pouch onto the top of the right armrest using the velcro strips. Remote Control Pouch Right Armrest B. Plug in the remote controller using the port located behind the hip airbag massager on the right side of the seat. C. Attach the seat cushion using the zippers on the backrest and seat. NOTE: Plug in the chair after completion and turn it on using the power switch on the back. The chair will automatically adjust to the proper seating position upon powering it on.

Adjusting Your Massage Chair

CAUTION Do not place your chair near any areas that may suffer from moisture or wetness. Avoid placing your chair in direct sunlight or near heating appliances. Always place your chair on an even and supported surface to avoid accidents and injuries. Moving The Chair Unplug the MC-4500 and store all loose wires in the seat of the chair. Move it by pushing down on the headrest and balancing the chair on its two back wheels (do not lift past a 40° angle), then you may push forward. Avoid pushing the MC-4500 on easily damagable surfaces to avoid scratches. If necessary you may need 2 or more people to lift and move the chair. What to Do Before Using Your Chair: • Monitor the power plug and source. Clean the plug and cord routinely to avoid dust buildup. Make sure the plug rests comfortably and protected between the power source and the chair. The cord should never sit under a heavy object or appear to have kinks, stretching or knots. • Check the clearance by fully reclining your chair. Make sure there are no obstacles in your way such as pets, children or side tables. • Place the chair away from walls. The chair should sit out at least 24 inches from the wall from the front and 4 inches from the back. INSTALLATION GUIDE

Using the Remote Controller

Special Notes 1. To ensure effective operation, do not press two or more keys at the same time. 2. Seat yourself comfortably in the chair before turning on or selecting any massage program. 3. Do not spill liquids onto the remote. If the remote encounters liquids, please unplug it from the chair immediately. USING THE REMOTE CONTROLLER ON/OFF: Press this button to turn the chair on and off HEATING: Press this button to activate the heating function. PAUSE: Press this button to pause your massage to return to later MENU: Press this button to go to the main menu. EXPERIENCE: In on status, press this key to enter the “fast relaxation” automatic massage program. Default work time is 8 minutes. AUTO: Press this button to choose from one of 6 auto massage programs including recovery, pain relief, stretch, sleeping, and experience LOWER BACKREST: Press this button to lower the backrest. RAISE BACKREST: Press this button to raise backrest. LOWER LEG REST: Press this button to lower the leg rest. RAISE LEG REST: Press this button to raise the legrest. ZERO-GRAVITY: Press this button to enter zero-gravity mode DIRECTIONAL PAD: Use these directional buttons to navigate the menu interface. In manual mode, these buttons are used to adjust massage positioning CONFIRM: Press this button to confirm your selections when navigating the menu interface. TIME ADJUSTMENT: Use these buttons to toggle massage duration. You can choose 10, 20, or 30 minutes.

Select by the navigation keys

Mode Position Width Speed 4D Auto Manual Airbag Roller Heating Timer s Stop Setting Menu Select by the navigation keys 31 30 THE LCD SCREEN Navigating the LCD Screen Main Interface Massage Position Temperature Level Heating Massage Speed - 5 Levels Massage Width - Narrow, Medium, Wide Air Pressure Intensity - 5 Levels 4D Massage - 4 Levels Kneading Tapping Knocking Pressing Zero Gravity Time Left Press the ON/OFF button to display the main menu and enter standby mode. The main menu shows the status of all massage functions. Press the MENU button while in the main interface to enter the menu interface. From here, the user can control all massage functions. Press MENU again to return to the main interface. After selecting a massage program, the chair will perform a body scan to determine the massage height. Once the body scan is complete it will beep 5 times, after that, you can adjust the massage position using the navigation buttons. Auto Mode: Press MENU and select AUTO to choose from one of 6 massage programs: RECOVER, RELIEF, STRETCH, SOFT, RENEW, CALMING, and SPECIAL by pressing OK. The SPECIAL category includes 6 additional programs: REFRESH, ENERGY, REVIVE, ACTIVE and HEALING. Manual Mode: Press MENU and use the navigation keys to select MANUAL. There are 5 customizable features: mode, position, width, speed, and 4D. Select from those functions to choose which features you would like to change. Refresh Energy Revive Active Healing 4D+ 4D- Lv. 1 Lv. 2 Lv. 3 Lv. 4 Lv. 5 Narrow Medium Wide Whole Shoulder Back Waist Seat Point Kneading Tapping Knocking Knead & Tap Shiatsu

Select by the navigation keys

Quick Soft Stop Auto Manual Airbag Roller Heating Timer s Stop Setting  Menu Select by the navigation keys Back ON Foot ON TEMP+ TEMP- Auto Manual Airbag Roller Heating Timer s Stop Setting  Menu Select by the navigation keys Back ON Foot ON TEMP+ TEMP- Auto Manual Airbag Roller Heating Timer s Stop Setting  Menu Select by the navigation keys Auto Manual Airbag Roller Heating Timer s Stop Setting  Menu Select by the navigation keys Language Auto Manual Airbag Roller Heating Timer s Stop Setting  Menu Select by the navigation keys Position Intensity 33 32 THE LCD SCREEN Foot Rollers: From the menu interface, choose ROLLER, to select one of three options: QUICK, SOFT and STOP. Heating: Press Menu, choose HEATING by the navigation key, press OK button to choose the heating function such as BACK ON, FOOT ON, TEMP+ or TEMP-. Stop: Select STOP under the menu to end the current massage and return to the main interface. Timer: press MENU key, using the navigation key to select menu item timing, you can choose from 3 massage times: 10 minutes, 20 minutes and 30 minutes. The default time is 20 minutes, the chair will turn off automatically after time is up Settings: From the menu interface, choose SETTINGS to change the language or to turn the LED lights on or off. Airbag Massage: From the menu interface, choose AIRBAG to select the type of airbag compression you want for your massage, then press OK to enter the next menu and choose a massage position and strength. Full Body Shoulder Hand Seat Leg Feet Lv. 1 Lv. 2 Lv. 3 Lv. 4 Lv. 5 Chinese English

34 CLEANING AND MAINTENANCE

Cleaning and Maintenance Cleaning Your Massage Chair Your massage chair contains partial leather, plastic, and metal components. Routine cleaning with a dry microfiber cloth can help your massage chair look clean and shiny. Only use a dry cloth to clean the product’s remote controller. Cleaning the Partial Leather Surfaces: Your MC-4500 has partial leather upholstery. You can clean these surfaces with a damp cloth and neutral detergent if necessary. Special Notes: • Before cleaning your massage chair, confirm that your chair is in the “OFF” position and unplug from the wall socket. • Never use a damp cloth to clean the remote controller. • Keep your chair away from heat, fire, or exposure to direct sunlight. • Never clean your chair with organic solvent or bleach. Only use a neutral detergent solution on the components of the MC-4500. • Never submerge your chair in water or saturate it with liquid. This poses a risk of electrocution or fire. Troubleshooting If you experience difficulties while using your chair, refer to this section of the operation manual. Contact truMedic® if this section does not address the problem you experience. My massage chair isn’t operating when I select a program. My massage chair makes a lot of noise during operation. My massage stopped unexpectedly during a session. The electrical wire is hot to the touch. Ensure the chair is fully plugged in. Check to make sure the power switch is in the “ON” position on the bottom right side of the chair. Choose a mode on the remote controller. The massage cycle of your choice may have ended. You may have been using your chair for too long. Wait 30 minutes before selecting another cycle. There is a mechanical problem. Contact [email protected] for further assistance. This may occur from overuse. Allow your chair to rest for 30 minutes and try again. The chair has a burned out fuse. Replace it with the appropriate fuse. Problem Solution The problem lies within an inner circuit. Contact truMedic® customer service at [email protected]. You are likely hearing the noise from the motor and other mechanical parts. Some noise is normal. If you notice any signs of overheating, turn off your unit and unplug immediately. Contact an authorized maintenance professional for more information. This troubleshooting guide provides examples of common issues but is not a comprehensive resource. Should you experience issues with your chair, discontinue use and contact truMedic® at 888-264-1766 or [email protected]. NOTE: • For repairs, please contact the distributor or after sales service. For more information, refer to your enclosed warranty card. • Any questions directed to customer service may be recorded for training purposes. • The instructions of specifications of this product may change without notice. • Should your chair need repair, customer service can help you find a qualified repair center. TROUBLESHOOTING

36 WARRANTY INFORMATION

Warranty Information TWO (2) YEAR LIMITED WARRANTY truMedic® warrants this truMedic® Massage Chair against defects in fs and/ or workmanship under normal use for a period of TWO (2) YEAR from the date of purchase by the original purchaser (“Warranty Period”). Normal use is defined as use by an end-user in a residential location. If a defect arises and a valid claim is received within the Warranty Period, at its option, truMedic® will either 1) repair the defect at no charge, using new or refurbished replacement parts, or 2) replace the truMedic® Massage Chair with a new or refurbished truMedic® Massage Chair OR 3) provide a credit in the amount of the purchase price of the original product. A replacement product or part, including a user-installable part installed in accordance with instructions provided by truMedic®, will be covered for the remaining warranty period of the original product. When a product or part is exchanged, any replacement item becomes your property and the replaced item becomes truMedic® property. When a credit is given, the original product must be returned to truMedic® and becomes truMedic® property. Obtaining Service: To obtain warranty service, call the truMedic® Warranty Service at 888-264-1766 or contact the company via email at [email protected]. Please be prepared to describe the truMedic® Massage Chair model that needs service and the nature of the problem. Proof of purchase is required. All repairs and replacements must be authorized in advance. Service options, parts availability and response times will vary. Limits and Exclusions: Coverage under this Warranty is limited to the United States of America, excluding the U.S. Territories of Guam, Puerto Rico, and the U.S. Virgin Islands and including Canada. This Warranty applies only to products manufactured by truMedic® that can be identified by the “truMedic®” trademark, trade name, or logo affixed to them or their packaging. The Warranty does not apply to any non-truMedic® products. truMedic®, in so far as permitted by law, provides these products “as is.” This warranty does not apply to: a) damage caused by failure to follow instructions relating to product’s use or the installation of components; b) damage caused by accident, abuse, misuse, fire, floods, earthquake or other external causes; c) damage caused by service performed by anyone who is not a representative of truMedic®; d) accessories used in conjunction with a covered product; e) a product or part that has been modified to alter functionality or capability; f) items intended to be periodically replaced by the purchaser during the normal life of the product including, without limitation, batteries or light bulbs; g) any product sold “as is” including, without limitation, floor demonstration models and refurbished items; or h) a product that is used commercially or for a commercial purpose. TRUMEDIC® SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS WARRANTY. TO THE EXTENT PERMITTED BY APPLICABLE LAW, TRUMEDIC® DISCLAIMS ANY AND ALL STATUTORY OR IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND WARRANTIES AGAINST HIDDEN OR LATENT DEFECTS. IF TRUMEDIC® CANNOT LAWFULLY DISCLAIM STATUTORY OR IMPLIED WARRANTIES, THEN TO THE EXTENT PERMITTED BY LAW, ALL SUCH WARRANTIES SHALL BE LIMITED IN DURATION TO THE DURATION OF THIS EXPRESS WARRANTY. Some states disallow the exclusion or limitation of incidental or consequential damages or how long an implied warranty lasts, so the above exclusions or limitations may not apply to you. This warranty gives you specific legal rights and you may also have other rights, which vary from state to state.

MC-4500 Massage Chair

Rated Time 30 minutes Rated Voltage AC120V~ 60Hz AC220V~ 50-60Hz AC240V~ 50Hz Power 260W Net Weight/Gross Weight Main Body: 236 lb/282.1 lb Armrest: 38.5 lb/48.5 lb Leg Rest: 64 lb/71.8 lb Packaging Size (L×W×H) Main Body: 62 × 31.6 × 37.9 in Armrest: 40.3 × 15.7 × 29.9 in Leg Rest: 23 × 22.4 × 24.2 in PRODUCT SPECIFICATIONS

TRUCORE DISTRIBUTORS, INC.

LOCATION 252 Indian Head Rd. Kings Park, NY 11754 TEL 888-264-1766 E-MAIL [email protected] WEBSITE www.truMedic.com ENG 1.0 all-guide s.com

Other Massager Manuals