Time Guard SLW360 Installation & Operating Instructions Manual
Text of the manual
I N S TA L L AT I O N & O P E R AT I N G
I N S T R U C T I O N S
360º SURFACE MOUNT
CEILING PIR LIGHT
CONTROLLER
Cat No. SLW360
Elcodis.com electronic components distributor
The SLW360 utilises passive infrared technology to
detect heat radiation of moving human bodies.Upon
detection, the attached lighting load will illuminate for
a user-determined time period. An integral daylight
sensor ensures day or night-only operation.
Important Information: Light Pollution and
considerate Lighting
Please be aware of the ann
Twist cover anti-clock wise
Align marks on moulding
Remove decorative cover
Cable
gasket
Mounting
screws
Top cover
Ceiling mount assembly method.
L1
L1
L2
L
N
E
L
N
E
Switched
Load
OUT
Switched
Load
OUT
Factory fitted
bridge wire
Factory fitted
bridge wire REMOVED
Time On
setting
Lux -
Dusk/Dawn
setting
Mains Supply IN
Mains Supply IN
In the abov
• PIR Sensor unit.
• Instruction manual. Please keep safe for future
reference.
• Accessory Pack. Includes 2 x wall plugs, 2 x wall
fixing screws, 1 x lens mask sticker.
• 1 x outdoor mounting sealing gasket.
• 1 x incoming/outgoing wire gasket.
Tools and parts needed
• 3 core flexible cable.
• Electric/hand-held drill & bits.
The sensor is more sensitive to movement ACROSS its
field of vision than to movement directly TOWARDS
(see diagram B). Therefore position the unit so that the
sensor looks ACROSS the likely approach path.
Avoid positioning the sensor where there are any
sources of heat in the detection area (extractor fans,
tumble dryer exhausts etc.) including opposite an
