Takstar E220 Operation & User’s Manual

得胜官方公众号与我们联系。 邮编：516121 广东省电声工程技术研究开发中心 广东省得胜电子有限公司制造 地址：广东省惠州市博罗县龙溪镇富康一路2号 全国服务热线：400 6828 333 传真：0752-6383950 邮箱：[email protected] 扫一扫，了解更多产品 版本：V1 产品特性 控制面板功能示意图 注意事项 使用说明 适用场合 标准配置 技术参数 ① ② ③ 2. 将Ø3.5mm的麦克风插头插入麦克风输入孔内； 3. 打开电源，LED数码显示屏亮，调整旋钮到合适的音量大小； 4. 使用过程中，若LED数码显示屏上的“ ”闪烁时，表示电池低电 量，请及时充电。 头戴麦克风 肩带 扩音器 USB充电线 说明书 ① 电源开关：向上方向转动旋钮，听到“滴”一声，此时LED数码显示 屏 显示“BLUE”，表示扩音器已通电并进入扩音状态，开机默认为 蓝牙模式，继续向上转动旋钮声音增大，反之，声音减小直至关机 ② AUX IN 输入插孔：用 Ø3.5mm连接线，将DVD 、MP3等音乐信号 导入本扩音器中，做为有源音箱使用 ③ MIC IN 输入插孔： 将头戴式麦克风插头插入此孔，进入扩音状态 ④ TF 卡插口：根据示意的插卡方向插入TF 内存卡，插入时，听到“嗒” 一声，表示已安装到位并将其锁住；取卡时只要将卡往下按，听到 “嗒”一声，TF内存卡会自动弹出来 ⑤ 充电输入插孔：将USB充电线插入此孔，另一端连接通用的USB输出 充电器（如手机充电器、电脑USB接口等)，即可对电池进行充电 ⑥ 上一曲按键 ：在蓝牙 播放状态时，短按此键为上一曲，长 按此键可减小音量；在FM播放状态时，短按此键可选上一个频道 ⑦ 播放/暂停按键 ：短按此键可控制蓝牙、MP3、FM、录音的播放与 暂停； 在MP3播放时，长按此键可以设置循环播放；在FM播 放时，长按此键进入全自动搜台 ⑧ 下一曲按键 ：在 ，短按此键为下一曲，长 按此键可增加音量；在FM播放状态时，短按此键可选下一个频道 ⑨ 功能切换按键：短按此键可切换蓝牙模式、TF卡模式及FM模式； 长按此键进入录音模式，录制完成后长按此键即可退出并保存录音; 录音操作：在FM模式下长按此键可录制当前播放的FM内容；在蓝牙、 MP3模式下长按此键可录制MIC语音。(注意录音时一定要插有TF卡、 头戴麦克风才能录音，录音操作可以在蓝牙、MP3或 模式下进行） ⑩ LED数码显示屏：可显示当前的工作状态及电池电量显示；当电池电 量标识“ ”闪烁时，表示电池低电压，此时应及时充电，以确保 本机正常运作，30秒无任何操作时，显示屏进入黑屏省电状态，按任 意键即可唤醒 ⑪ FM天线 ⑫ 肩挂扣 ⑬ 背扣 、MP3 在蓝牙播放时，长按此键可以断开蓝牙连接，再次长按此键即 可连接蓝牙； 蓝牙、MP3播放状态时 FM ：用于增加FM接收信号强度，使用FM收音机时建议拉出以得 到较好的收音效果 防风棉 ④ ⑤ ⑥⑦⑧⑨ ⑩ ⑪ ⑫ ⑬ 1. 将头戴麦克风正确的佩戴在头部，并调整好麦克风的拾音角度（建议 拾音距离1-2cm）；

Operation Specification 1. Put on the headphone microphone and adjust the pickup angle (it is recommended to keep it away from mouth 1-2cm). 2. Insert the Ø3.5mm microphone plug into the microphone input connector. 3. Turn on the power switch. LED display lights up. Adjust the knob to proper volume level. 4. During operation, if LED display shows flashing. This means the battery power is low. Please recharge in time. headphone microphone shoulder strap USB charging cable user manual windscreen ① ② ③ ④ ⑤ ⑥⑦⑧⑨ ⑩ ⑪ ⑫ ⑬ Version: V1 Guangdong Takstar Electronic Co., Ltd. Address: No. 2 Fu Kang Yi Rd., Longxi Boluo Huizhou, Guangdong 516121 China Tel: +86 752 6383644 Fax: +86 752 6383952 Website: E-mail: [email protected] www.takstar.com Dear Customer, Thank you for purchasing TAKSTAR E220 portable digital amplifier. Please read the user manual carefully before operation and keep it for reference in future. If you have any question or suggestion, please contact our local dealer. Preface ● ● ● ● ● ● ● ● The portable digital amplifier combining microphone, player, power amplifier and speaker cabinet together Rear earth material speaker, light weight, wonderful sound, high volume Class F power amplifier chip, low power consumption, high efficiency, output peak power up to 8W Music playing function plays the multimedia audio files in TF card Bluetooth function to connect with Bluetooth equipment to play music, e.g. cell phone, PC, PAD, etc High capacity Li-ion battery; 4 hours of recharging lasts for 10 hours of operation Multiple wearing choices, shoulder hanging and waist wearing for convenient application Ergonomic design, unique and fashionable contour, comfortable operation Control panel function ① Power switch: turn it upward. When you hear the sound “Dee”, LED display shows BLUE. This means the amplifier is turned on and in the working status. It defaults Bluetooth mode when turned on. Turn the power switch upward to increase the volume, the downward to decrease the volume till turning off the amplifier. ② Input connector: use Ø3.5mm connection cable to connect the music signal of DVD or MP3 to the amplifier, and the amplifier can be used as active speaker cabinet. ③ MIC IN input connector: connect the headphone microphone with this connect for sound reinforcement. ④ TF card port: insert the TF card according to the direction of the illustration. When you hear the sound “Da” after you insert it, it means the card is fixed. When you want to take out the card, just press it and the card will come out automatically with a sound “Da”. ⑤ Recharging port: connect one end of USB cable with this port, and the other end with USB output charger (e.g. cell phone charger, PC USB interface) to recharge the battery. ⑥ Previous song button: shortly press it for previous song when playing bluetooth/TF card music. Keep pressing it for decreasing volume. In FM playing status, shortly press it for the previous channel. ⑦ Play/pause button: shortly press it to play/pause the playing of Bluetooth or MP3 or FM or recording. During Bluetooth playing, keep pressing it to disconnect the Bluetooth connection. Press again to reconnect the Bluetooth. During MP3 playing, keep pressing it to repeat the playing. During FM playing, keep pressing it to search the station automatically. ⑧ Next song button: shortly press it for next song when playing bluetooth/TF card music. Keep pressing it for increasing volume. In FM playing status, shortly press it for the next channel. ⑨ Function switching button: shortly press this button to switch Bluetooth mode, TF card mode or FM mode. Keep pressing it to enter into recording mode. After recording keep pressing it to exit and save the recording. Recording operation: in FM mode, keep pressing this button to record the current FM program. In Bluetooth or MP3 mode, keep pressing it to record microphone sound (Note: the recording can be carried out only if there is no TF card inserted or headphone connected, the recording can not be carried out. The recording can be operated in Bluetooth mode/MP3 mode/ FM mode). ⑩ LED digital display: it shows the current operation status and the battery power. When the battery icon Flashes, this means the battery voltage is low. Please recharge in time. After being turned on, if there is no operation in 30 seconds, the LED display lights off to save the power. Press any button to light up the LED display. To avoid electric shock, over temperature, catching fire, explosion, mechanical risk and hurt or property loss caused by improper use, please read the following items carefully before operation: 1. Make sure if the power of connected equipment matches with amplifier power. Adjust the volume to proper level during operation. Do not operate at high volume level to avoid hearing loss. 2. If abnormal phenomenon (smoke, abnormal smell) happens, please turn off the power switch and disconnect the power plug with power socket, and send the product to local dealer for maintenance. 3. The product and accessories should be put in dry and ventilated place rather than humid or dusty environment. Prevent the product from fire, liquid, rain, water, over-colliding, throwing, vibrating, vent hole covered to avoid function destroyed. 4. When the product needs to be installed on wall or ceiling, please fix it tightly to avoid dropping risk. 5. Please abide by safety rules during operation. Do not use the product in the place prohibited by regulation or law to avoid accident. 6. Do not disassemble or repair the product by yourself to avoid hurt. If you have question or need service, please contact the local dealer. 7. The applicable altitude and climate condition of this product is subject to the power supply equipment. Caution ● ● ● ● ● ● Frequency Response: 80Hz-12KHz ● Peak Power: 8W Speaker Impedance: 4Ω Operation Voltage: DC 3.5-4.2V ● Battery Specification: 18650 one battery 3.7V/1500mAh ● Charging Voltage: DC 5V/600mA ● Charging Time: ≈4h Operation Time: ≥10h Media Playing: TF card, max 64G Media Format: MP3, WAV ● Net Weight: 195g ● Dimension: 91x41x119mm Product Content Amplifier Application ● Teaching, tour guide, training, promotion, propaganda, morning exercise, entertainment ⑪ FM antenna: it is used to increase the signal receiving. It is recommended to pull it out for better receiving during FM mode. ⑫ Shoulder strap buckle ⑬ Belt clip