Takstar E180M Operation & User’s Manual
Read Online
Read the Takstar E180M Operation & User’s Manual online using the built-in PDF viewer.
Text of the manual
② 电源指示灯:当扩音器通电时,此灯会亮。绿灯表示高电压, 红灯表示低
电压,当此灯亮红灯时,请及时为电池充电
③ 音乐播放指示灯:音乐播放时,此灯闪烁
④ U盘插孔:将存放有音乐文件的U盘插入此孔
⑤ TF内存卡插口:根据示意标示方向插入存有音乐文件的TF内存卡,插入
时,听到“嗒”一声,表示已安装到位并将其锁住;取卡时只要将卡往下
按,听到“嗒”一声,TF内存卡会自动弹出来
⑥ 音乐功能按键: 、 - 为上一曲,长按此键可以单独调小音乐播放音量,
满足讲解时做背景音乐
⑦ 播放/暂停按键: 按此键可以控制音乐的播放与暂停
⑧ 音乐功能按键: 、 + 为下一曲,长按此键可以单独增大音乐播放音量,
满足讲解时做背景音乐
⑨ 音乐播放切换键: 按此键可以对音乐播放开关进行控制,麦克风在上述
模式中同步使用
⑩ MIC IN 输入插孔:将ø3.5mm的麦克风插头插入此孔,进入扩音工作状态;
操作时,请不要将麦克风的拾音面朝向扩音器的扬声器,以免产生啸叫
⑪ LINE IN 输入插孔:用ø3.5mm插头的音频线将DVD、MP3等音乐信号导入
本机可做为有源音箱使用
电源
频
峰值输出功率:10W
扬声器阻抗:4Ω
工作电压:3.7V
电池规格:3.7V/2000mAh 锂离子电池
充电器规格:DC 5V 600mA
充电时间:4-6小时
使用时间:≥20小时
U盘和TF卡:支持到32G
产品规格:86×98×46mm
单机重量:350g
率响应:80Hz-12KHz
扩音器(数码播放器)
版本: V4
DC 5V 150mA
①
②
③
④
⑤
⑥⑦
⑧⑨
DC 5V 600mA
⑩
⑪
⑫
⑬
⑭
尊敬的用户:
感谢您选购TAKSTAR E180M便携式数字扩音器,为了您能够更好的了
解使用本产品,建议您在使用前仔细阅读本说明书。
若存在有疑问或者您有宝贵的建议,可通过拨打得
胜官方服务热线 400 6828 333 或使用微信扫描二维码
关注得胜官方公众号与我们联系。
⑫ 充电输入插孔:将USB充电线插入此孔,另一端连接通用的USB输出充电器
(如手机充电器、电脑USB接口等),即可对电池进行充电
⑬ 充电指示灯:将USB充电线插入 ⑫ 孔内时,指示灯亮, 表示电池进入充电状
态; 指示灯由红色变为绿色后, 表示电已充满
⑭ 肩挂扣
邮编:516121
广东省电声工程技术研究开发中心
广东省得胜电子有限公司制造
地址:广东省惠州市博罗县龙溪镇富康一路2号
全国服务热线:400 6828 333
传真:0752-6383950
邮箱:[email protected]
扫一扫,了解更多产品
产品特性
技术参数
控制面板功能示意图
注意事项
标准配置
适用场合
Amplifier (Digital Player)
Dear User:
Thank you for purchasing TAKSTAR E180M
. Please read the
user manual before operation and keep it for reference in future.
Digital Amplifier
⃝
⃝
⃝
⃝
⃝
⃝
⃝
⃝
D
Music play function supports multimedia audio file play of USB flash
disk and TF card
LWO-THD Automatic Adaptive Technology features low distortion even
at high output power
Built-in high capacity rechargeable lithium-ion battery
Built-in MCU intelligent recharging management system for secure
battery charging and discharging, fast charging time (4-6hrs) and long
play time (more than 20hrs)
With AUX audio signal input function, as a small speaker
Exquisite and durable design
Choices of waist or shoulder hanging wear style for convenient use
igital circuitry technology, 10W output power
① P
you hear a clicking sound “Di” , the amplifier is now switched on and
the power LED ② will light, turn left for louder voice, turn right for
lower voice until power off
② Power indicator: It will light green when the amplifier is power-on. If
the battery is low, it will turn red, please recharge the battery in time
③ Music play indicator: It will glitter when playing the music
④ USB port: Plug in the USB disk which has stored the music files
⑤ TF card port: Please insert the TF card according to the direction of the
illustration, when you hear “Da” after you insert it, it means the card
is fixed; when you want to take out the card, just press it and the card
will come out automatically with a sound “Da”
⑥ Press 、 - for previous song, press 、 - long for volume reduction.
⑦ Press for play/pause function
⑧ Press 、 + for next song, press 、 + long for volume increase
⑨ Music play button: press this button can turn on/off the music, the
microphone can be used at the same time
⑩ Microphone input socket: insert the microphone Φ3.5mm plug into this
socket; do not point the microphone directly to amplifier, or it will cause
howling
⑪ Line input socket: Plug signal such as DVD, MP3 into the LINE IN socket
with a Φ3.5mm audio cable, the amplifier will be used as a speaker
⑫ Charging input connector: connect USB charging cable with this
connector, and the other end with USB output charger (e.g. cell phone
charger, PC USB interface, etc) to recharge the battery
ower switch with volume control: Turn the wheel ① to the left until
To avoid personal injury or property loss caused by electric shock, over
temperature, fire, radiation, explosion, mechanical risk and improper use,
please read carefully and abide by the following items before operation:
1. Please check if the power of the connected equipment matches with that
of this product before operation. Adjust the volume to proper level during
operation. Do not operate at over-power or high volume level for a long
time to avoid abnormal functioning or hearing loss.
2. If abnormal phenomenon (smoke, abnormal smell) happens, please turn
off the power switch and disconnect the power plug with power socket,
and send the product to local dealer for maintenance.
3. The product and accessories should be put in dry and ventilated place
rather than humid or dusty environment. Prevent the product from fire,
liquid, rain, water, over-colliding, throwing, vibrating, vent hole covered
to avoid function damage.
4. When the product needs to be installed on wall or ceiling, please fix it tightly
to avoid dropping risk.
5. Please abide by safety rules during operation. Do not use the product
in the place prohibited by regulation or law to avoid accident.
6. Do not disassemble or repair the product by yourself to avoid personal
injury. If you have question or need service, please contact the local dealer.
7. The applicable altitude and climate condition of this product is subject to
the power supply equipment.
Caution
Standard Configuration
Digital Amplifier
Headworn Microphone
Rope
User Manual
Teaching, tour guiding, training, selling, morning exercise, entertainment,
presentation
Frequency Response: 80Hz-12KHz
Output Power: 10W
Output Impedance: 4Ω
Operating Voltage: 3.7V
Battery specification: 3.7V/2000mAh lithium-ion battery
Charger: DC 5V 600mA
Recharging Period: 4-6hrs
Playtime: ≥20hrs
USB disk and TF card: Max. 32G
Dimension: 86×98×46mm
Net Weight: 350g
Version: V4
DC 5V 150mA
①
②
③
④
⑤
⑥⑦⑧⑨
DC 5V 600mA
⑩
⑪
⑫
⑬
⑭
⑬ Charging LED: plug USB charging cable into connector ⑫, and the charging
LED lights up. This means the battery is being recharged. When the charging
LED turns green, the battery is recharged fully
⑭ Hanging buckle
Guangdong Takstar Electronic Co., Ltd.
Address: No. 2 Fu Kang Yi Rd., Longxi Boluo Huizhou, Guangdong 516121 China
Tel: +86 752 6383644 Fax: +86 752 6383952 Website:
E-mail: [email protected]
www.takstar.com
Features
Specification
Function Illustration
Application
USB charging cable